examples/cypress/CY8CKIT-064S0S2-4343W/Makefile - external/github.com/memfault/memfault-firmware-sdk - Git at Google

 ################################################################################
 # \file Makefile
 # \version 1.0
 #
 # \brief
 # Top-level application make file.
 #
 ################################################################################
 # \copyright
 # Copyright 2018-2019 Cypress Semiconductor Corporation
 # SPDX-License-Identifier: Apache-2.0
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 #     http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
 ################################################################################

 # Choose between "aws_demos" and "aws_tests"
 CY_AFR_BUILD=aws_demos

 # Root location of AFR directory
 CY_AFR_ROOT=../../../../../..

 # Build artifact location
 CY_BUILD_RELATIVE_LOCATION=$(CY_AFR_ROOT)/build/cy
 CY_BUILD_LOCATION=$(abspath $(CY_BUILD_RELATIVE_LOCATION))

 # Memfault
 MEMFAULT_SDK_ROOT := ../../..
 MEMFAULT_PORT_ROOT := $(MEMFAULT_SDK_ROOT)/examples/cypress/CY8CKIT-064S0S2-4343W/src

 MEMFAULT_COMPONENTS := core util panics metrics
 include $(MEMFAULT_SDK_ROOT)/makefiles/MemfaultWorker.mk

 ################################################################################
 # Basic Configuration
 ################################################################################

 # Target board/hardware
 TARGET=CY8CKIT_064S0S2_4343W

 # Name of application (used to derive name of final linked file).
 APPNAME=$(CY_AFR_BUILD)

 # Name of toolchain to use. Options include:
 #
 # GCC_ARM -- GCC 7.2.1, provided with ModusToolbox IDE
 # ARM     -- ARM Compiler (must be installed separately)
 # IAR     -- IAR Compiler (must be installed separately)
 #
 # See also: CY_COMPILER_PATH below
 TOOLCHAIN=GCC_ARM

 # Default build configuration. Options include:
 #
 # Debug   -- build with minimal optimizations, focus on debugging.
 # Release -- build with full optimizations
 CONFIG=Debug

 # If set to "true" or "1", display full command-lines when building.
 VERBOSE=


 ################################################################################
 # Feature Configuration
 ################################################################################
 # Enable or disable BLE module
 BLE_SUPPORTED=1

 # Set to 1 to add OTA defines, sources, and libraries (must be used with MCUBoot)
 # NOTE: Extra code must be called from your app to initialize AFR OTA Agent
 OTA_SUPPORT=0

 # This platform always uses EXTERNAL_FLASH
 OTA_USE_EXTERNAL_FLASH:=1

 # Define CY_TEST_APP_VERSION_IN_TAR here to test application version
 #        in TAR archive at start of OTA image download.
 # NOTE: This requires that the version numbers here and in the header file match.
 # NOTE: This will create compile warnings such as
 #		'warning: "APP_VERSION_MAJOR" redefined'
 #
 # CY_TEST_APP_VERSION_IN_TAR=1
 #
 # APP_VERSION_MAJOR:=1
 # APP_VERSION_MINOR:=0
 # APP_VERSION_BUILD:=0

 # CY_TFM_PSA_SUPPORTED feature cannot be disabled on this platform.
 CY_TFM_PSA_SUPPORTED=1

 # Using new Bootloader with SWAP / STATUS
 CY_MCUBOOT_SWAP_USING_STATUS=1

 ################################################################################
 # Advanced Configuration
 ################################################################################

 # Enable optional code that is ordinarily disabled by default.
 #
 # Available components depend on the specific targeted hardware and firmware
 # in use. In general, if you have
 #
 #    COMPONENTS=foo bar
 #
 # ... then code in directories named COMPONENT_foo and COMPONENT_bar will be
 # added to the build
 #
 COMPONENTS=

 # Like COMPONENTS, but disable optional code that was enabled by default.
 DISABLE_COMPONENTS=

 # By default the build system automatically looks in the Makefile's directory
 # tree for source code and builds it. The SOURCES variable can be used to
 # manually add source code to the build process from a location not searched
 # by default, or otherwise not found by the build system.
 SOURCES = \
 	$(MEMFAULT_COMPONENTS_SRCS) \
 	$(MEMFAULT_SDK_ROOT)/ports/freertos/src/memfault_metrics_freertos.c \
 	$(MEMFAULT_SDK_ROOT)/ports/freertos/src/memfault_core_freertos.c \
 	$(MEMFAULT_SDK_ROOT)/ports/freertos/src/memfault_freertos_ram_regions.c

 # Like SOURCES, but for include directories. Value should be paths to
 # directories (without a leading -I).
 # TODO remove this once whd is update to new version
 INCLUDES = \
 	$(CY_AFR_ROOT)/vendors/cypress/MTB/libraries/wifi-host-driver/WiFi_Host_Driver/resources/nvram/TARGET_CY8CKIT_064B0S2_4343W \
 	$(MEMFAULT_COMPONENTS_INC_FOLDERS) \
 	$(MEMFAULT_SDK_ROOT)/ports/include \
 	$(MEMFAULT_PORT_ROOT)

 # Add additional defines to the build process (without a leading -D).
 DEFINES=

 # Select softfp or hardfp floating point. Default is softfp.
 VFP_SELECT=

 # Additional / custom C compiler flags.
 #
 # NOTE: Includes and defines should use the INCLUDES and DEFINES variable
 # above.
 CFLAGS=

 # Additional / custom C++ compiler flags.
 #
 # NOTE: Includes and defines should use the INCLUDES and DEFINES variable
 # above.
 CXXFLAGS=

 # Additional / custom assembler flags.
 #
 # NOTE: Includes and defines should use the INCLUDES and DEFINES variable
 # above.
 ASFLAGS=

 # Additional / custom linker flags.
 LDFLAGS=-Wl,--build-id

 # Additional / custom libraries to link in to the application.
 LDLIBS=

 # Path to the linker script to use (if empty, use the default linker script).
 export LINKER_SCRIPT=cyb06xxa_cm4_dual.ld

 # Custom pre-build commands to run.
 PREBUILD=

 # Custom post-build commands to run.
 POSTBUILD=


 ################################################################################
 # Paths
 ################################################################################

 # Relative path to the project directory (default is the Makefile's directory).
 #
 # This controls where automatic source code discovery looks for code.
 CY_APP_PATH=

 # Relative path to the "base" library. It provides the core makefile build
 # infrastructure.
 CY_BASELIB_PATH=$(CY_AFR_ROOT)/vendors/cypress/MTB/psoc6/psoc6make

 # Absolute path to the compiler's "bin" directory.
 #
 # The default depends on the selected TOOLCHAIN (GCC_ARM uses the ModusToolbox
 # IDE provided compiler by default).
 CY_COMPILER_PATH=

 # Include aFR configuration make file
 include $(CY_AFR_ROOT)/projects/cypress/make_support/afr.mk


 ################################################################################
 # Tools path
 ################################################################################

 # Locate ModusToolbox IDE helper tools folders in default installation
 # locations for Windows, Linux, and macOS.
 CY_WIN_HOME=$(subst \,/,$(USERPROFILE))
 CY_TOOLS_PATHS ?= $(wildcard \
     $(CY_WIN_HOME)/ModusToolbox/tools_* \
     $(HOME)/ModusToolbox/tools_* \
     /Applications/ModusToolbox/tools_*)

 # If you install ModusToolbox IDE in a custom location, add the path to its
 # "tools_X.Y" folder (where X and Y are the version number of the tools
 # folder).
 CY_TOOLS_PATHS+=

 # Default to the newest installed tools folder, or the users override (if it's
 # found).
 CY_TOOLS_DIR=$(lastword $(sort $(wildcard $(CY_TOOLS_PATHS))))

 ifeq ($(CY_TOOLS_DIR),)
 $(error Unable to find any of the available CY_TOOLS_PATHS -- $(CY_TOOLS_PATHS))
 endif

 $(info Tools Directory: $(CY_TOOLS_DIR))
 include $(CY_TOOLS_DIR)/make/start.mk
	################################################################################
	# \file Makefile
	# \version 1.0
	#
	# \brief
	# Top-level application make file.
	#
	################################################################################
	# \copyright
	# Copyright 2018-2019 Cypress Semiconductor Corporation
	# SPDX-License-Identifier: Apache-2.0
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	################################################################################

	# Choose between "aws_demos" and "aws_tests"
	CY_AFR_BUILD=aws_demos

	# Root location of AFR directory
	CY_AFR_ROOT=../../../../../..

	# Build artifact location
	CY_BUILD_RELATIVE_LOCATION=$(CY_AFR_ROOT)/build/cy
	CY_BUILD_LOCATION=$(abspath $(CY_BUILD_RELATIVE_LOCATION))

	# Memfault
	MEMFAULT_SDK_ROOT := ../../..
	MEMFAULT_PORT_ROOT := $(MEMFAULT_SDK_ROOT)/examples/cypress/CY8CKIT-064S0S2-4343W/src

	MEMFAULT_COMPONENTS := core util panics metrics
	include $(MEMFAULT_SDK_ROOT)/makefiles/MemfaultWorker.mk

	################################################################################
	# Basic Configuration
	################################################################################

	# Target board/hardware
	TARGET=CY8CKIT_064S0S2_4343W

	# Name of application (used to derive name of final linked file).
	APPNAME=$(CY_AFR_BUILD)

	# Name of toolchain to use. Options include:
	#
	# GCC_ARM -- GCC 7.2.1, provided with ModusToolbox IDE
	# ARM -- ARM Compiler (must be installed separately)
	# IAR -- IAR Compiler (must be installed separately)
	#
	# See also: CY_COMPILER_PATH below
	TOOLCHAIN=GCC_ARM

	# Default build configuration. Options include:
	#
	# Debug -- build with minimal optimizations, focus on debugging.
	# Release -- build with full optimizations
	CONFIG=Debug

	# If set to "true" or "1", display full command-lines when building.
	VERBOSE=


	################################################################################
	# Feature Configuration
	################################################################################
	# Enable or disable BLE module
	BLE_SUPPORTED=1

	# Set to 1 to add OTA defines, sources, and libraries (must be used with MCUBoot)
	# NOTE: Extra code must be called from your app to initialize AFR OTA Agent
	OTA_SUPPORT=0

	# This platform always uses EXTERNAL_FLASH
	OTA_USE_EXTERNAL_FLASH:=1

	# Define CY_TEST_APP_VERSION_IN_TAR here to test application version
	# in TAR archive at start of OTA image download.
	# NOTE: This requires that the version numbers here and in the header file match.
	# NOTE: This will create compile warnings such as
	# 'warning: "APP_VERSION_MAJOR" redefined'
	#
	# CY_TEST_APP_VERSION_IN_TAR=1
	#
	# APP_VERSION_MAJOR:=1
	# APP_VERSION_MINOR:=0
	# APP_VERSION_BUILD:=0

	# CY_TFM_PSA_SUPPORTED feature cannot be disabled on this platform.
	CY_TFM_PSA_SUPPORTED=1

	# Using new Bootloader with SWAP / STATUS
	CY_MCUBOOT_SWAP_USING_STATUS=1

	################################################################################
	# Advanced Configuration
	################################################################################

	# Enable optional code that is ordinarily disabled by default.
	#
	# Available components depend on the specific targeted hardware and firmware
	# in use. In general, if you have
	#
	# COMPONENTS=foo bar
	#
	# ... then code in directories named COMPONENT_foo and COMPONENT_bar will be
	# added to the build
	#
	COMPONENTS=

	# Like COMPONENTS, but disable optional code that was enabled by default.
	DISABLE_COMPONENTS=

	# By default the build system automatically looks in the Makefile's directory
	# tree for source code and builds it. The SOURCES variable can be used to
	# manually add source code to the build process from a location not searched
	# by default, or otherwise not found by the build system.
	SOURCES = \
	$(MEMFAULT_COMPONENTS_SRCS) \
	$(MEMFAULT_SDK_ROOT)/ports/freertos/src/memfault_metrics_freertos.c \
	$(MEMFAULT_SDK_ROOT)/ports/freertos/src/memfault_core_freertos.c \
	$(MEMFAULT_SDK_ROOT)/ports/freertos/src/memfault_freertos_ram_regions.c

	# Like SOURCES, but for include directories. Value should be paths to
	# directories (without a leading -I).
	# TODO remove this once whd is update to new version
	INCLUDES = \
	$(CY_AFR_ROOT)/vendors/cypress/MTB/libraries/wifi-host-driver/WiFi_Host_Driver/resources/nvram/TARGET_CY8CKIT_064B0S2_4343W \
	$(MEMFAULT_COMPONENTS_INC_FOLDERS) \
	$(MEMFAULT_SDK_ROOT)/ports/include \
	$(MEMFAULT_PORT_ROOT)

	# Add additional defines to the build process (without a leading -D).
	DEFINES=

	# Select softfp or hardfp floating point. Default is softfp.
	VFP_SELECT=

	# Additional / custom C compiler flags.
	#
	# NOTE: Includes and defines should use the INCLUDES and DEFINES variable
	# above.
	CFLAGS=

	# Additional / custom C++ compiler flags.
	#
	# NOTE: Includes and defines should use the INCLUDES and DEFINES variable
	# above.
	CXXFLAGS=

	# Additional / custom assembler flags.
	#
	# NOTE: Includes and defines should use the INCLUDES and DEFINES variable
	# above.
	ASFLAGS=

	# Additional / custom linker flags.
	LDFLAGS=-Wl,--build-id

	# Additional / custom libraries to link in to the application.
	LDLIBS=

	# Path to the linker script to use (if empty, use the default linker script).
	export LINKER_SCRIPT=cyb06xxa_cm4_dual.ld

	# Custom pre-build commands to run.
	PREBUILD=

	# Custom post-build commands to run.
	POSTBUILD=


	################################################################################
	# Paths
	################################################################################

	# Relative path to the project directory (default is the Makefile's directory).
	#
	# This controls where automatic source code discovery looks for code.
	CY_APP_PATH=

	# Relative path to the "base" library. It provides the core makefile build
	# infrastructure.
	CY_BASELIB_PATH=$(CY_AFR_ROOT)/vendors/cypress/MTB/psoc6/psoc6make

	# Absolute path to the compiler's "bin" directory.
	#
	# The default depends on the selected TOOLCHAIN (GCC_ARM uses the ModusToolbox
	# IDE provided compiler by default).
	CY_COMPILER_PATH=

	# Include aFR configuration make file
	include $(CY_AFR_ROOT)/projects/cypress/make_support/afr.mk


	################################################################################
	# Tools path
	################################################################################

	# Locate ModusToolbox IDE helper tools folders in default installation
	# locations for Windows, Linux, and macOS.
	CY_WIN_HOME=$(subst \,/,$(USERPROFILE))
	CY_TOOLS_PATHS ?= $(wildcard \
	$(CY_WIN_HOME)/ModusToolbox/tools_* \
	$(HOME)/ModusToolbox/tools_* \
	/Applications/ModusToolbox/tools_*)

	# If you install ModusToolbox IDE in a custom location, add the path to its
	# "tools_X.Y" folder (where X and Y are the version number of the tools
	# folder).
	CY_TOOLS_PATHS+=

	# Default to the newest installed tools folder, or the users override (if it's
	# found).
	CY_TOOLS_DIR=$(lastword $(sort $(wildcard $(CY_TOOLS_PATHS))))

	ifeq ($(CY_TOOLS_DIR),)
	$(error Unable to find any of the available CY_TOOLS_PATHS -- $(CY_TOOLS_PATHS))
	endif

	$(info Tools Directory: $(CY_TOOLS_DIR))
	include $(CY_TOOLS_DIR)/make/start.mk