| // Tencent is pleased to support the open source community by making RapidJSON available. | |
| // | |
| // Copyright (C) 2015 THL A29 Limited, a Tencent company, and Milo Yip. All rights reserved. | |
| // | |
| // Licensed under the MIT License (the "License"); you may not use this file except | |
| // in compliance with the License. You may obtain a copy of the License at | |
| // | |
| // http://opensource.org/licenses/MIT | |
| // | |
| // Unless required by applicable law or agreed to in writing, software distributed | |
| // under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR | |
| // CONDITIONS OF ANY KIND, either express or implied. See the License for the | |
| // specific language governing permissions and limitations under the License. | |
| #include "unittest.h" | |
| #include "rapidjson/reader.h" | |
| #include "rapidjson/internal/dtoa.h" | |
| #include "rapidjson/internal/itoa.h" | |
| #include "rapidjson/memorystream.h" | |
| using namespace rapidjson; | |
| #ifdef __GNUC__ | |
| RAPIDJSON_DIAG_PUSH | |
| RAPIDJSON_DIAG_OFF(effc++) | |
| RAPIDJSON_DIAG_OFF(float-equal) | |
| RAPIDJSON_DIAG_OFF(missing-noreturn) | |
| #endif | |
| #ifdef __clang__ | |
| RAPIDJSON_DIAG_PUSH | |
| RAPIDJSON_DIAG_OFF(variadic-macros) | |
| RAPIDJSON_DIAG_OFF(c++98-compat-pedantic) | |
| #endif | |
| template<bool expect> | |
| struct ParseBoolHandler : BaseReaderHandler<UTF8<>, ParseBoolHandler<expect> > { | |
| ParseBoolHandler() : step_(0) {} | |
| bool Default() { ADD_FAILURE(); return false; } | |
| // gcc 4.8.x generates warning in EXPECT_EQ(bool, bool) on this gtest version. | |
| // Workaround with EXPECT_TRUE(). | |
| bool Bool(bool b) { /*EXPECT_EQ(expect, b); */EXPECT_TRUE(expect == b); ++step_; return true; } | |
| unsigned step_; | |
| }; | |
| TEST(Reader, ParseTrue) { | |
| StringStream s("true"); | |
| ParseBoolHandler<true> h; | |
| Reader reader; | |
| reader.Parse(s, h); | |
| EXPECT_EQ(1u, h.step_); | |
| } | |
| TEST(Reader, ParseFalse) { | |
| StringStream s("false"); | |
| ParseBoolHandler<false> h; | |
| Reader reader; | |
| reader.Parse(s, h); | |
| EXPECT_EQ(1u, h.step_); | |
| } | |
| struct ParseIntHandler : BaseReaderHandler<UTF8<>, ParseIntHandler> { | |
| ParseIntHandler() : step_(0), actual_() {} | |
| bool Default() { ADD_FAILURE(); return false; } | |
| bool Int(int i) { actual_ = i; step_++; return true; } | |
| unsigned step_; | |
| int actual_; | |
| }; | |
| struct ParseUintHandler : BaseReaderHandler<UTF8<>, ParseUintHandler> { | |
| ParseUintHandler() : step_(0), actual_() {} | |
| bool Default() { ADD_FAILURE(); return false; } | |
| bool Uint(unsigned i) { actual_ = i; step_++; return true; } | |
| unsigned step_; | |
| unsigned actual_; | |
| }; | |
| struct ParseInt64Handler : BaseReaderHandler<UTF8<>, ParseInt64Handler> { | |
| ParseInt64Handler() : step_(0), actual_() {} | |
| bool Default() { ADD_FAILURE(); return false; } | |
| bool Int64(int64_t i) { actual_ = i; step_++; return true; } | |
| unsigned step_; | |
| int64_t actual_; | |
| }; | |
| struct ParseUint64Handler : BaseReaderHandler<UTF8<>, ParseUint64Handler> { | |
| ParseUint64Handler() : step_(0), actual_() {} | |
| bool Default() { ADD_FAILURE(); return false; } | |
| bool Uint64(uint64_t i) { actual_ = i; step_++; return true; } | |
| unsigned step_; | |
| uint64_t actual_; | |
| }; | |
| struct ParseDoubleHandler : BaseReaderHandler<UTF8<>, ParseDoubleHandler> { | |
| ParseDoubleHandler() : step_(0), actual_() {} | |
| bool Default() { ADD_FAILURE(); return false; } | |
| bool Double(double d) { actual_ = d; step_++; return true; } | |
| unsigned step_; | |
| double actual_; | |
| }; | |
| TEST(Reader, ParseNumber_Integer) { | |
| #define TEST_INTEGER(Handler, str, x) \ | |
| { \ | |
| StringStream s(str); \ | |
| Handler h; \ | |
| Reader reader; \ | |
| reader.Parse(s, h); \ | |
| EXPECT_EQ(1u, h.step_); \ | |
| EXPECT_EQ(x, h.actual_); \ | |
| } | |
| TEST_INTEGER(ParseUintHandler, "0", 0u); | |
| TEST_INTEGER(ParseUintHandler, "123", 123u); | |
| TEST_INTEGER(ParseUintHandler, "2147483648", 2147483648u); // 2^31 - 1 (cannot be stored in int) | |
| TEST_INTEGER(ParseUintHandler, "4294967295", 4294967295u); | |
| TEST_INTEGER(ParseIntHandler, "-123", -123); | |
| TEST_INTEGER(ParseIntHandler, "-2147483648", static_cast<int32_t>(0x80000000)); // -2^31 (min of int) | |
| TEST_INTEGER(ParseUint64Handler, "4294967296", RAPIDJSON_UINT64_C2(1, 0)); // 2^32 (max of unsigned + 1, force to use uint64_t) | |
| TEST_INTEGER(ParseUint64Handler, "18446744073709551615", RAPIDJSON_UINT64_C2(0xFFFFFFFF, 0xFFFFFFFF)); // 2^64 - 1 (max of uint64_t) | |
| TEST_INTEGER(ParseInt64Handler, "-2147483649", static_cast<int64_t>(RAPIDJSON_UINT64_C2(0xFFFFFFFF, 0x7FFFFFFF))); // -2^31 -1 (min of int - 1, force to use int64_t) | |
| TEST_INTEGER(ParseInt64Handler, "-9223372036854775808", static_cast<int64_t>(RAPIDJSON_UINT64_C2(0x80000000, 0x00000000))); // -2^63 (min of int64_t) | |
| // Random test for uint32_t/int32_t | |
| { | |
| union { | |
| uint32_t u; | |
| int32_t i; | |
| }u; | |
| Random r; | |
| for (unsigned i = 0; i < 100000; i++) { | |
| u.u = r(); | |
| char buffer[32]; | |
| *internal::u32toa(u.u, buffer) = '\0'; | |
| TEST_INTEGER(ParseUintHandler, buffer, u.u); | |
| if (u.i < 0) { | |
| *internal::i32toa(u.i, buffer) = '\0'; | |
| TEST_INTEGER(ParseIntHandler, buffer, u.i); | |
| } | |
| } | |
| } | |
| // Random test for uint64_t/int64_t | |
| { | |
| union { | |
| uint64_t u; | |
| int64_t i; | |
| }u; | |
| Random r; | |
| for (unsigned i = 0; i < 100000; i++) { | |
| u.u = uint64_t(r()) << 32; | |
| u.u |= r(); | |
| char buffer[32]; | |
| if (u.u > uint64_t(4294967295u)) { | |
| *internal::u64toa(u.u, buffer) = '\0'; | |
| TEST_INTEGER(ParseUint64Handler, buffer, u.u); | |
| } | |
| if (u.i < -int64_t(2147483648u)) { | |
| *internal::i64toa(u.i, buffer) = '\0'; | |
| TEST_INTEGER(ParseInt64Handler, buffer, u.i); | |
| } | |
| } | |
| } | |
| #undef TEST_INTEGER | |
| } | |
| template<bool fullPrecision> | |
| static void TestParseDouble() { | |
| #define TEST_DOUBLE(fullPrecision, str, x) \ | |
| { \ | |
| StringStream s(str); \ | |
| ParseDoubleHandler h; \ | |
| Reader reader; \ | |
| ASSERT_EQ(kParseErrorNone, reader.Parse<fullPrecision ? kParseFullPrecisionFlag : 0>(s, h).Code()); \ | |
| EXPECT_EQ(1u, h.step_); \ | |
| internal::Double e(x), a(h.actual_); \ | |
| if (fullPrecision) { \ | |
| EXPECT_EQ(e.Uint64Value(), a.Uint64Value()); \ | |
| if (e.Uint64Value() != a.Uint64Value()) \ | |
| printf(" String: %s\n Actual: %.17g\nExpected: %.17g\n", str, h.actual_, x); \ | |
| } \ | |
| else { \ | |
| EXPECT_EQ(e.Sign(), a.Sign()); /* for 0.0 != -0.0 */ \ | |
| EXPECT_DOUBLE_EQ(x, h.actual_); \ | |
| } \ | |
| } | |
| TEST_DOUBLE(fullPrecision, "0.0", 0.0); | |
| TEST_DOUBLE(fullPrecision, "-0.0", -0.0); // For checking issue #289 | |
| TEST_DOUBLE(fullPrecision, "1.0", 1.0); | |
| TEST_DOUBLE(fullPrecision, "-1.0", -1.0); | |
| TEST_DOUBLE(fullPrecision, "1.5", 1.5); | |
| TEST_DOUBLE(fullPrecision, "-1.5", -1.5); | |
| TEST_DOUBLE(fullPrecision, "3.1416", 3.1416); | |
| TEST_DOUBLE(fullPrecision, "1E10", 1E10); | |
| TEST_DOUBLE(fullPrecision, "1e10", 1e10); | |
| TEST_DOUBLE(fullPrecision, "1E+10", 1E+10); | |
| TEST_DOUBLE(fullPrecision, "1E-10", 1E-10); | |
| TEST_DOUBLE(fullPrecision, "-1E10", -1E10); | |
| TEST_DOUBLE(fullPrecision, "-1e10", -1e10); | |
| TEST_DOUBLE(fullPrecision, "-1E+10", -1E+10); | |
| TEST_DOUBLE(fullPrecision, "-1E-10", -1E-10); | |
| TEST_DOUBLE(fullPrecision, "1.234E+10", 1.234E+10); | |
| TEST_DOUBLE(fullPrecision, "1.234E-10", 1.234E-10); | |
| TEST_DOUBLE(fullPrecision, "1.79769e+308", 1.79769e+308); | |
| TEST_DOUBLE(fullPrecision, "2.22507e-308", 2.22507e-308); | |
| TEST_DOUBLE(fullPrecision, "-1.79769e+308", -1.79769e+308); | |
| TEST_DOUBLE(fullPrecision, "-2.22507e-308", -2.22507e-308); | |
| TEST_DOUBLE(fullPrecision, "4.9406564584124654e-324", 4.9406564584124654e-324); // minimum denormal | |
| TEST_DOUBLE(fullPrecision, "2.2250738585072009e-308", 2.2250738585072009e-308); // Max subnormal double | |
| TEST_DOUBLE(fullPrecision, "2.2250738585072014e-308", 2.2250738585072014e-308); // Min normal positive double | |
| TEST_DOUBLE(fullPrecision, "1.7976931348623157e+308", 1.7976931348623157e+308); // Max double | |
| TEST_DOUBLE(fullPrecision, "1e-10000", 0.0); // must underflow | |
| TEST_DOUBLE(fullPrecision, "18446744073709551616", 18446744073709551616.0); // 2^64 (max of uint64_t + 1, force to use double) | |
| TEST_DOUBLE(fullPrecision, "-9223372036854775809", -9223372036854775809.0); // -2^63 - 1(min of int64_t + 1, force to use double) | |
| TEST_DOUBLE(fullPrecision, "0.9868011474609375", 0.9868011474609375); // https://github.com/miloyip/rapidjson/issues/120 | |
| TEST_DOUBLE(fullPrecision, "123e34", 123e34); // Fast Path Cases In Disguise | |
| TEST_DOUBLE(fullPrecision, "45913141877270640000.0", 45913141877270640000.0); | |
| TEST_DOUBLE(fullPrecision, "2.2250738585072011e-308", 2.2250738585072011e-308); // http://www.exploringbinary.com/php-hangs-on-numeric-value-2-2250738585072011e-308/ | |
| TEST_DOUBLE(fullPrecision, "1e-00011111111111", 0.0); // Issue #313 | |
| TEST_DOUBLE(fullPrecision, "-1e-00011111111111", -0.0); | |
| TEST_DOUBLE(fullPrecision, "1e-214748363", 0.0); // Maximum supported negative exponent | |
| TEST_DOUBLE(fullPrecision, "1e-214748364", 0.0); | |
| TEST_DOUBLE(fullPrecision, "1e-21474836311", 0.0); | |
| TEST_DOUBLE(fullPrecision, "0.017976931348623157e+310", 1.7976931348623157e+308); // Max double in another form | |
| // Since | |
| // abs((2^-1022 - 2^-1074) - 2.2250738585072012e-308) = 3.109754131239141401123495768877590405345064751974375599... ¡Á 10^-324 | |
| // abs((2^-1022) - 2.2250738585072012e-308) = 1.830902327173324040642192159804623318305533274168872044... ¡Á 10 ^ -324 | |
| // So 2.2250738585072012e-308 should round to 2^-1022 = 2.2250738585072014e-308 | |
| TEST_DOUBLE(fullPrecision, "2.2250738585072012e-308", 2.2250738585072014e-308); // http://www.exploringbinary.com/java-hangs-when-converting-2-2250738585072012e-308/ | |
| // More closer to normal/subnormal boundary | |
| // boundary = 2^-1022 - 2^-1075 = 2.225073858507201136057409796709131975934819546351645648... ¡Á 10^-308 | |
| TEST_DOUBLE(fullPrecision, "2.22507385850720113605740979670913197593481954635164564e-308", 2.2250738585072009e-308); | |
| TEST_DOUBLE(fullPrecision, "2.22507385850720113605740979670913197593481954635164565e-308", 2.2250738585072014e-308); | |
| // 1.0 is in (1.0 - 2^-54, 1.0 + 2^-53) | |
| // 1.0 - 2^-54 = 0.999999999999999944488848768742172978818416595458984375 | |
| TEST_DOUBLE(fullPrecision, "0.999999999999999944488848768742172978818416595458984375", 1.0); // round to even | |
| TEST_DOUBLE(fullPrecision, "0.999999999999999944488848768742172978818416595458984374", 0.99999999999999989); // previous double | |
| TEST_DOUBLE(fullPrecision, "0.999999999999999944488848768742172978818416595458984376", 1.0); // next double | |
| // 1.0 + 2^-53 = 1.00000000000000011102230246251565404236316680908203125 | |
| TEST_DOUBLE(fullPrecision, "1.00000000000000011102230246251565404236316680908203125", 1.0); // round to even | |
| TEST_DOUBLE(fullPrecision, "1.00000000000000011102230246251565404236316680908203124", 1.0); // previous double | |
| TEST_DOUBLE(fullPrecision, "1.00000000000000011102230246251565404236316680908203126", 1.00000000000000022); // next double | |
| // Numbers from https://github.com/floitsch/double-conversion/blob/master/test/cctest/test-strtod.cc | |
| TEST_DOUBLE(fullPrecision, "72057594037927928.0", 72057594037927928.0); | |
| TEST_DOUBLE(fullPrecision, "72057594037927936.0", 72057594037927936.0); | |
| TEST_DOUBLE(fullPrecision, "72057594037927932.0", 72057594037927936.0); | |
| TEST_DOUBLE(fullPrecision, "7205759403792793199999e-5", 72057594037927928.0); | |
| TEST_DOUBLE(fullPrecision, "7205759403792793200001e-5", 72057594037927936.0); | |
| TEST_DOUBLE(fullPrecision, "9223372036854774784.0", 9223372036854774784.0); | |
| TEST_DOUBLE(fullPrecision, "9223372036854775808.0", 9223372036854775808.0); | |
| TEST_DOUBLE(fullPrecision, "9223372036854775296.0", 9223372036854775808.0); | |
| TEST_DOUBLE(fullPrecision, "922337203685477529599999e-5", 9223372036854774784.0); | |
| TEST_DOUBLE(fullPrecision, "922337203685477529600001e-5", 9223372036854775808.0); | |
| TEST_DOUBLE(fullPrecision, "10141204801825834086073718800384", 10141204801825834086073718800384.0); | |
| TEST_DOUBLE(fullPrecision, "10141204801825835211973625643008", 10141204801825835211973625643008.0); | |
| TEST_DOUBLE(fullPrecision, "10141204801825834649023672221696", 10141204801825835211973625643008.0); | |
| TEST_DOUBLE(fullPrecision, "1014120480182583464902367222169599999e-5", 10141204801825834086073718800384.0); | |
| TEST_DOUBLE(fullPrecision, "1014120480182583464902367222169600001e-5", 10141204801825835211973625643008.0); | |
| TEST_DOUBLE(fullPrecision, "5708990770823838890407843763683279797179383808", 5708990770823838890407843763683279797179383808.0); | |
| TEST_DOUBLE(fullPrecision, "5708990770823839524233143877797980545530986496", 5708990770823839524233143877797980545530986496.0); | |
| TEST_DOUBLE(fullPrecision, "5708990770823839207320493820740630171355185152", 5708990770823839524233143877797980545530986496.0); | |
| TEST_DOUBLE(fullPrecision, "5708990770823839207320493820740630171355185151999e-3", 5708990770823838890407843763683279797179383808.0); | |
| TEST_DOUBLE(fullPrecision, "5708990770823839207320493820740630171355185152001e-3", 5708990770823839524233143877797980545530986496.0); | |
| { | |
| char n1e308[310]; // '1' followed by 308 '0' | |
| n1e308[0] = '1'; | |
| for (int i = 1; i < 309; i++) | |
| n1e308[i] = '0'; | |
| n1e308[309] = '\0'; | |
| TEST_DOUBLE(fullPrecision, n1e308, 1E308); | |
| } | |
| // Cover trimming | |
| TEST_DOUBLE(fullPrecision, | |
| "2.22507385850720113605740979670913197593481954635164564802342610972482222202107694551652952390813508" | |
| "7914149158913039621106870086438694594645527657207407820621743379988141063267329253552286881372149012" | |
| "9811224514518898490572223072852551331557550159143974763979834118019993239625482890171070818506906306" | |
| "6665599493827577257201576306269066333264756530000924588831643303777979186961204949739037782970490505" | |
| "1080609940730262937128958950003583799967207254304360284078895771796150945516748243471030702609144621" | |
| "5722898802581825451803257070188608721131280795122334262883686223215037756666225039825343359745688844" | |
| "2390026549819838548794829220689472168983109969836584681402285424333066033985088644580400103493397042" | |
| "7567186443383770486037861622771738545623065874679014086723327636718751234567890123456789012345678901" | |
| "e-308", | |
| 2.2250738585072014e-308); | |
| { | |
| static const unsigned count = 100; // Tested with 1000000 locally | |
| Random r; | |
| Reader reader; // Reusing reader to prevent heap allocation | |
| // Exhaustively test different exponents with random significant | |
| for (uint64_t exp = 0; exp < 2047; exp++) { | |
| ; | |
| for (unsigned i = 0; i < count; i++) { | |
| // Need to call r() in two statements for cross-platform coherent sequence. | |
| uint64_t u = (exp << 52) | uint64_t(r() & 0x000FFFFF) << 32; | |
| u |= uint64_t(r()); | |
| internal::Double d = internal::Double(u); | |
| char buffer[32]; | |
| *internal::dtoa(d.Value(), buffer) = '\0'; | |
| StringStream s(buffer); | |
| ParseDoubleHandler h; | |
| ASSERT_EQ(kParseErrorNone, reader.Parse<fullPrecision ? kParseFullPrecisionFlag : 0>(s, h).Code()); | |
| EXPECT_EQ(1u, h.step_); | |
| internal::Double a(h.actual_); | |
| if (fullPrecision) { | |
| EXPECT_EQ(d.Uint64Value(), a.Uint64Value()); | |
| if (d.Uint64Value() != a.Uint64Value()) | |
| printf(" String: %s\n Actual: %.17g\nExpected: %.17g\n", buffer, h.actual_, d.Value()); | |
| } | |
| else { | |
| EXPECT_EQ(d.Sign(), a.Sign()); // for 0.0 != -0.0 | |
| EXPECT_DOUBLE_EQ(d.Value(), h.actual_); | |
| } | |
| } | |
| } | |
| } | |
| // Issue #340 | |
| TEST_DOUBLE(fullPrecision, "7.450580596923828e-9", 7.450580596923828e-9); | |
| { | |
| internal::Double d(1.0); | |
| for (int i = 0; i < 324; i++) { | |
| char buffer[32]; | |
| *internal::dtoa(d.Value(), buffer) = '\0'; | |
| StringStream s(buffer); | |
| ParseDoubleHandler h; | |
| Reader reader; | |
| ASSERT_EQ(kParseErrorNone, reader.Parse<fullPrecision ? kParseFullPrecisionFlag : 0>(s, h).Code()); | |
| EXPECT_EQ(1u, h.step_); | |
| internal::Double a(h.actual_); | |
| if (fullPrecision) { | |
| EXPECT_EQ(d.Uint64Value(), a.Uint64Value()); | |
| if (d.Uint64Value() != a.Uint64Value()) | |
| printf(" String: %s\n Actual: %.17g\nExpected: %.17g\n", buffer, h.actual_, d.Value()); | |
| } | |
| else { | |
| EXPECT_EQ(d.Sign(), a.Sign()); // for 0.0 != -0.0 | |
| EXPECT_DOUBLE_EQ(d.Value(), h.actual_); | |
| } | |
| d = d.Value() * 0.5; | |
| } | |
| } | |
| #undef TEST_DOUBLE | |
| } | |
| TEST(Reader, ParseNumber_NormalPrecisionDouble) { | |
| TestParseDouble<false>(); | |
| } | |
| TEST(Reader, ParseNumber_FullPrecisionDouble) { | |
| TestParseDouble<true>(); | |
| } | |
| TEST(Reader, ParseNumber_NormalPrecisionError) { | |
| static unsigned count = 1000000; | |
| Random r; | |
| double ulpSum = 0.0; | |
| double ulpMax = 0.0; | |
| for (unsigned i = 0; i < count; i++) { | |
| internal::Double e, a; | |
| do { | |
| // Need to call r() in two statements for cross-platform coherent sequence. | |
| uint64_t u = uint64_t(r()) << 32; | |
| u |= uint64_t(r()); | |
| e = u; | |
| } while (e.IsNan() || e.IsInf() || !e.IsNormal()); | |
| char buffer[32]; | |
| *internal::dtoa(e.Value(), buffer) = '\0'; | |
| StringStream s(buffer); | |
| ParseDoubleHandler h; | |
| Reader reader; | |
| ASSERT_EQ(kParseErrorNone, reader.Parse(s, h).Code()); | |
| EXPECT_EQ(1u, h.step_); | |
| a = h.actual_; | |
| uint64_t bias1 = e.ToBias(); | |
| uint64_t bias2 = a.ToBias(); | |
| double ulp = static_cast<double>(bias1 >= bias2 ? bias1 - bias2 : bias2 - bias1); | |
| ulpMax = std::max(ulpMax, ulp); | |
| ulpSum += ulp; | |
| } | |
| printf("ULP Average = %g, Max = %g \n", ulpSum / count, ulpMax); | |
| } | |
| TEST(Reader, ParseNumber_Error) { | |
| #define TEST_NUMBER_ERROR(errorCode, str, errorOffset) \ | |
| { \ | |
| char buffer[1001]; \ | |
| sprintf(buffer, "%s", str); \ | |
| InsituStringStream s(buffer); \ | |
| BaseReaderHandler<> h; \ | |
| Reader reader; \ | |
| EXPECT_FALSE(reader.Parse(s, h)); \ | |
| EXPECT_EQ(errorCode, reader.GetParseErrorCode());\ | |
| EXPECT_EQ(errorOffset, reader.GetErrorOffset());\ | |
| } | |
| // Number too big to be stored in double. | |
| { | |
| char n1e309[311]; // '1' followed by 309 '0' | |
| n1e309[0] = '1'; | |
| for (int i = 1; i < 310; i++) | |
| n1e309[i] = '0'; | |
| n1e309[310] = '\0'; | |
| TEST_NUMBER_ERROR(kParseErrorNumberTooBig, n1e309, 0); | |
| } | |
| TEST_NUMBER_ERROR(kParseErrorNumberTooBig, "1e309", 0); | |
| // Miss fraction part in number. | |
| TEST_NUMBER_ERROR(kParseErrorNumberMissFraction, "1.", 2); | |
| TEST_NUMBER_ERROR(kParseErrorNumberMissFraction, "1.a", 2); | |
| // Miss exponent in number. | |
| TEST_NUMBER_ERROR(kParseErrorNumberMissExponent, "1e", 2); | |
| TEST_NUMBER_ERROR(kParseErrorNumberMissExponent, "1e_", 2); | |
| #undef TEST_NUMBER_ERROR | |
| } | |
| template <typename Encoding> | |
| struct ParseStringHandler : BaseReaderHandler<Encoding, ParseStringHandler<Encoding> > { | |
| ParseStringHandler() : str_(0), length_(0), copy_() {} | |
| ~ParseStringHandler() { EXPECT_TRUE(str_ != 0); if (copy_) free(const_cast<typename Encoding::Ch*>(str_)); } | |
| ParseStringHandler(const ParseStringHandler&); | |
| ParseStringHandler& operator=(const ParseStringHandler&); | |
| bool Default() { ADD_FAILURE(); return false; } | |
| bool String(const typename Encoding::Ch* str, size_t length, bool copy) { | |
| EXPECT_EQ(0, str_); | |
| if (copy) { | |
| str_ = static_cast<typename Encoding::Ch*>(malloc((length + 1) * sizeof(typename Encoding::Ch))); | |
| memcpy(const_cast<typename Encoding::Ch*>(str_), str, (length + 1) * sizeof(typename Encoding::Ch)); | |
| } | |
| else | |
| str_ = str; | |
| length_ = length; | |
| copy_ = copy; | |
| return true; | |
| } | |
| const typename Encoding::Ch* str_; | |
| size_t length_; | |
| bool copy_; | |
| }; | |
| TEST(Reader, ParseString) { | |
| #define TEST_STRING(Encoding, e, x) \ | |
| { \ | |
| Encoding::Ch* buffer = StrDup(x); \ | |
| GenericInsituStringStream<Encoding> is(buffer); \ | |
| ParseStringHandler<Encoding> h; \ | |
| GenericReader<Encoding, Encoding> reader; \ | |
| reader.Parse<kParseInsituFlag | kParseValidateEncodingFlag>(is, h); \ | |
| EXPECT_EQ(0, StrCmp<Encoding::Ch>(e, h.str_)); \ | |
| EXPECT_EQ(StrLen(e), h.length_); \ | |
| free(buffer); \ | |
| GenericStringStream<Encoding> s(x); \ | |
| ParseStringHandler<Encoding> h2; \ | |
| GenericReader<Encoding, Encoding> reader2; \ | |
| reader2.Parse(s, h2); \ | |
| EXPECT_EQ(0, StrCmp<Encoding::Ch>(e, h2.str_)); \ | |
| EXPECT_EQ(StrLen(e), h2.length_); \ | |
| } | |
| // String constant L"\xXX" can only specify character code in bytes, which is not endianness-neutral. | |
| // And old compiler does not support u"" and U"" string literal. So here specify string literal by array of Ch. | |
| // In addition, GCC 4.8 generates -Wnarrowing warnings when character code >= 128 are assigned to signed integer types. | |
| // Therefore, utype is added for declaring unsigned array, and then cast it to Encoding::Ch. | |
| #define ARRAY(...) { __VA_ARGS__ } | |
| #define TEST_STRINGARRAY(Encoding, utype, array, x) \ | |
| { \ | |
| static const utype ue[] = array; \ | |
| static const Encoding::Ch* e = reinterpret_cast<const Encoding::Ch *>(&ue[0]); \ | |
| TEST_STRING(Encoding, e, x); \ | |
| } | |
| #define TEST_STRINGARRAY2(Encoding, utype, earray, xarray) \ | |
| { \ | |
| static const utype ue[] = earray; \ | |
| static const utype xe[] = xarray; \ | |
| static const Encoding::Ch* e = reinterpret_cast<const Encoding::Ch *>(&ue[0]); \ | |
| static const Encoding::Ch* x = reinterpret_cast<const Encoding::Ch *>(&xe[0]); \ | |
| TEST_STRING(Encoding, e, x); \ | |
| } | |
| TEST_STRING(UTF8<>, "", "\"\""); | |
| TEST_STRING(UTF8<>, "Hello", "\"Hello\""); | |
| TEST_STRING(UTF8<>, "Hello\nWorld", "\"Hello\\nWorld\""); | |
| TEST_STRING(UTF8<>, "\"\\/\b\f\n\r\t", "\"\\\"\\\\/\\b\\f\\n\\r\\t\""); | |
| TEST_STRING(UTF8<>, "\x24", "\"\\u0024\""); // Dollar sign U+0024 | |
| TEST_STRING(UTF8<>, "\xC2\xA2", "\"\\u00A2\""); // Cents sign U+00A2 | |
| TEST_STRING(UTF8<>, "\xE2\x82\xAC", "\"\\u20AC\""); // Euro sign U+20AC | |
| TEST_STRING(UTF8<>, "\xF0\x9D\x84\x9E", "\"\\uD834\\uDD1E\""); // G clef sign U+1D11E | |
| // UTF16 | |
| TEST_STRING(UTF16<>, L"", L"\"\""); | |
| TEST_STRING(UTF16<>, L"Hello", L"\"Hello\""); | |
| TEST_STRING(UTF16<>, L"Hello\nWorld", L"\"Hello\\nWorld\""); | |
| TEST_STRING(UTF16<>, L"\"\\/\b\f\n\r\t", L"\"\\\"\\\\/\\b\\f\\n\\r\\t\""); | |
| TEST_STRINGARRAY(UTF16<>, wchar_t, ARRAY(0x0024, 0x0000), L"\"\\u0024\""); | |
| TEST_STRINGARRAY(UTF16<>, wchar_t, ARRAY(0x00A2, 0x0000), L"\"\\u00A2\""); // Cents sign U+00A2 | |
| TEST_STRINGARRAY(UTF16<>, wchar_t, ARRAY(0x20AC, 0x0000), L"\"\\u20AC\""); // Euro sign U+20AC | |
| TEST_STRINGARRAY(UTF16<>, wchar_t, ARRAY(0xD834, 0xDD1E, 0x0000), L"\"\\uD834\\uDD1E\""); // G clef sign U+1D11E | |
| // UTF32 | |
| TEST_STRINGARRAY2(UTF32<>, unsigned, ARRAY('\0'), ARRAY('\"', '\"', '\0')); | |
| TEST_STRINGARRAY2(UTF32<>, unsigned, ARRAY('H', 'e', 'l', 'l', 'o', '\0'), ARRAY('\"', 'H', 'e', 'l', 'l', 'o', '\"', '\0')); | |
| TEST_STRINGARRAY2(UTF32<>, unsigned, ARRAY('H', 'e', 'l', 'l', 'o', '\n', 'W', 'o', 'r', 'l', 'd', '\0'), ARRAY('\"', 'H', 'e', 'l', 'l', 'o', '\\', 'n', 'W', 'o', 'r', 'l', 'd', '\"', '\0')); | |
| TEST_STRINGARRAY2(UTF32<>, unsigned, ARRAY('\"', '\\', '/', '\b', '\f', '\n', '\r', '\t', '\0'), ARRAY('\"', '\\', '\"', '\\', '\\', '/', '\\', 'b', '\\', 'f', '\\', 'n', '\\', 'r', '\\', 't', '\"', '\0')); | |
| TEST_STRINGARRAY2(UTF32<>, unsigned, ARRAY(0x00024, 0x0000), ARRAY('\"', '\\', 'u', '0', '0', '2', '4', '\"', '\0')); | |
| TEST_STRINGARRAY2(UTF32<>, unsigned, ARRAY(0x000A2, 0x0000), ARRAY('\"', '\\', 'u', '0', '0', 'A', '2', '\"', '\0')); // Cents sign U+00A2 | |
| TEST_STRINGARRAY2(UTF32<>, unsigned, ARRAY(0x020AC, 0x0000), ARRAY('\"', '\\', 'u', '2', '0', 'A', 'C', '\"', '\0')); // Euro sign U+20AC | |
| TEST_STRINGARRAY2(UTF32<>, unsigned, ARRAY(0x1D11E, 0x0000), ARRAY('\"', '\\', 'u', 'D', '8', '3', '4', '\\', 'u', 'D', 'D', '1', 'E', '\"', '\0')); // G clef sign U+1D11E | |
| #undef TEST_STRINGARRAY | |
| #undef ARRAY | |
| #undef TEST_STRING | |
| // Support of null character in string | |
| { | |
| StringStream s("\"Hello\\u0000World\""); | |
| const char e[] = "Hello\0World"; | |
| ParseStringHandler<UTF8<> > h; | |
| Reader reader; | |
| reader.Parse(s, h); | |
| EXPECT_EQ(0, memcmp(e, h.str_, h.length_ + 1)); | |
| EXPECT_EQ(11u, h.length_); | |
| } | |
| } | |
| TEST(Reader, ParseString_Transcoding) { | |
| const char* x = "\"Hello\""; | |
| const wchar_t* e = L"Hello"; | |
| GenericStringStream<UTF8<> > is(x); | |
| GenericReader<UTF8<>, UTF16<> > reader; | |
| ParseStringHandler<UTF16<> > h; | |
| reader.Parse(is, h); | |
| EXPECT_EQ(0, StrCmp<UTF16<>::Ch>(e, h.str_)); | |
| EXPECT_EQ(StrLen(e), h.length_); | |
| } | |
| TEST(Reader, ParseString_TranscodingWithValidation) { | |
| const char* x = "\"Hello\""; | |
| const wchar_t* e = L"Hello"; | |
| GenericStringStream<UTF8<> > is(x); | |
| GenericReader<UTF8<>, UTF16<> > reader; | |
| ParseStringHandler<UTF16<> > h; | |
| reader.Parse<kParseValidateEncodingFlag>(is, h); | |
| EXPECT_EQ(0, StrCmp<UTF16<>::Ch>(e, h.str_)); | |
| EXPECT_EQ(StrLen(e), h.length_); | |
| } | |
| TEST(Reader, ParseString_NonDestructive) { | |
| StringStream s("\"Hello\\nWorld\""); | |
| ParseStringHandler<UTF8<> > h; | |
| Reader reader; | |
| reader.Parse(s, h); | |
| EXPECT_EQ(0, StrCmp("Hello\nWorld", h.str_)); | |
| EXPECT_EQ(11u, h.length_); | |
| } | |
| template <typename Encoding> | |
| ParseErrorCode TestString(const typename Encoding::Ch* str) { | |
| GenericStringStream<Encoding> s(str); | |
| BaseReaderHandler<Encoding> h; | |
| GenericReader<Encoding, Encoding> reader; | |
| reader.template Parse<kParseValidateEncodingFlag>(s, h); | |
| return reader.GetParseErrorCode(); | |
| } | |
| TEST(Reader, ParseString_Error) { | |
| #define TEST_STRING_ERROR(errorCode, str, errorOffset)\ | |
| {\ | |
| GenericStringStream<UTF8<> > s(str);\ | |
| BaseReaderHandler<UTF8<> > h;\ | |
| GenericReader<UTF8<> , UTF8<> > reader;\ | |
| reader.Parse<kParseValidateEncodingFlag>(s, h);\ | |
| EXPECT_EQ(errorCode, reader.GetParseErrorCode());\ | |
| EXPECT_EQ(errorOffset, reader.GetErrorOffset());\ | |
| } | |
| #define ARRAY(...) { __VA_ARGS__ } | |
| #define TEST_STRINGENCODING_ERROR(Encoding, TargetEncoding, utype, array) \ | |
| { \ | |
| static const utype ue[] = array; \ | |
| static const Encoding::Ch* e = reinterpret_cast<const Encoding::Ch *>(&ue[0]); \ | |
| EXPECT_EQ(kParseErrorStringInvalidEncoding, TestString<Encoding>(e));\ | |
| /* decode error */\ | |
| GenericStringStream<Encoding> s(e);\ | |
| BaseReaderHandler<TargetEncoding> h;\ | |
| GenericReader<Encoding, TargetEncoding> reader;\ | |
| reader.Parse(s, h);\ | |
| EXPECT_EQ(kParseErrorStringInvalidEncoding, reader.GetParseErrorCode());\ | |
| } | |
| // Invalid escape character in string. | |
| TEST_STRING_ERROR(kParseErrorStringEscapeInvalid, "[\"\\a\"]", 2); | |
| // Incorrect hex digit after \\u escape in string. | |
| TEST_STRING_ERROR(kParseErrorStringUnicodeEscapeInvalidHex, "[\"\\uABCG\"]", 2); | |
| // Quotation in \\u escape in string (Issue #288) | |
| TEST_STRING_ERROR(kParseErrorStringUnicodeEscapeInvalidHex, "[\"\\uaaa\"]", 2); | |
| TEST_STRING_ERROR(kParseErrorStringUnicodeEscapeInvalidHex, "[\"\\uD800\\uFFF\"]", 2); | |
| // The surrogate pair in string is invalid. | |
| TEST_STRING_ERROR(kParseErrorStringUnicodeSurrogateInvalid, "[\"\\uD800X\"]", 2); | |
| TEST_STRING_ERROR(kParseErrorStringUnicodeSurrogateInvalid, "[\"\\uD800\\uFFFF\"]", 2); | |
| // Missing a closing quotation mark in string. | |
| TEST_STRING_ERROR(kParseErrorStringMissQuotationMark, "[\"Test]", 7); | |
| // http://www.cl.cam.ac.uk/~mgk25/ucs/examples/UTF-8-test.txt | |
| // 3 Malformed sequences | |
| // 3.1 Unexpected continuation bytes | |
| { | |
| char e[] = { '[', '\"', 0, '\"', ']', '\0' }; | |
| for (unsigned char c = 0x80u; c <= 0xBFu; c++) { | |
| e[2] = static_cast<char>(c); | |
| ParseErrorCode error = TestString<UTF8<> >(e); | |
| EXPECT_EQ(kParseErrorStringInvalidEncoding, error); | |
| if (error != kParseErrorStringInvalidEncoding) | |
| std::cout << static_cast<unsigned>(c) << std::endl; | |
| } | |
| } | |
| // 3.2 Lonely start characters, 3.5 Impossible bytes | |
| { | |
| char e[] = { '[', '\"', 0, ' ', '\"', ']', '\0' }; | |
| for (unsigned c = 0xC0u; c <= 0xFFu; c++) { | |
| e[2] = static_cast<char>(c); | |
| TEST_STRING_ERROR(kParseErrorStringInvalidEncoding, e, 2); | |
| } | |
| } | |
| // 4 Overlong sequences | |
| // 4.1 Examples of an overlong ASCII character | |
| TEST_STRINGENCODING_ERROR(UTF8<>, UTF16<>, unsigned char, ARRAY('[', '\"', 0xC0u, 0xAFu, '\"', ']', '\0')); | |
| TEST_STRINGENCODING_ERROR(UTF8<>, UTF16<>, unsigned char, ARRAY('[', '\"', 0xE0u, 0x80u, 0xAFu, '\"', ']', '\0')); | |
| TEST_STRINGENCODING_ERROR(UTF8<>, UTF16<>, unsigned char, ARRAY('[', '\"', 0xF0u, 0x80u, 0x80u, 0xAFu, '\"', ']', '\0')); | |
| // 4.2 Maximum overlong sequences | |
| TEST_STRINGENCODING_ERROR(UTF8<>, UTF16<>, unsigned char, ARRAY('[', '\"', 0xC1u, 0xBFu, '\"', ']', '\0')); | |
| TEST_STRINGENCODING_ERROR(UTF8<>, UTF16<>, unsigned char, ARRAY('[', '\"', 0xE0u, 0x9Fu, 0xBFu, '\"', ']', '\0')); | |
| TEST_STRINGENCODING_ERROR(UTF8<>, UTF16<>, unsigned char, ARRAY('[', '\"', 0xF0u, 0x8Fu, 0xBFu, 0xBFu, '\"', ']', '\0')); | |
| // 4.3 Overlong representation of the NUL character | |
| TEST_STRINGENCODING_ERROR(UTF8<>, UTF16<>, unsigned char, ARRAY('[', '\"', 0xC0u, 0x80u, '\"', ']', '\0')); | |
| TEST_STRINGENCODING_ERROR(UTF8<>, UTF16<>, unsigned char, ARRAY('[', '\"', 0xE0u, 0x80u, 0x80u, '\"', ']', '\0')); | |
| TEST_STRINGENCODING_ERROR(UTF8<>, UTF16<>, unsigned char, ARRAY('[', '\"', 0xF0u, 0x80u, 0x80u, 0x80u, '\"', ']', '\0')); | |
| // 5 Illegal code positions | |
| // 5.1 Single UTF-16 surrogates | |
| TEST_STRINGENCODING_ERROR(UTF8<>, UTF16<>, unsigned char, ARRAY('[', '\"', 0xEDu, 0xA0u, 0x80u, '\"', ']', '\0')); | |
| TEST_STRINGENCODING_ERROR(UTF8<>, UTF16<>, unsigned char, ARRAY('[', '\"', 0xEDu, 0xADu, 0xBFu, '\"', ']', '\0')); | |
| TEST_STRINGENCODING_ERROR(UTF8<>, UTF16<>, unsigned char, ARRAY('[', '\"', 0xEDu, 0xAEu, 0x80u, '\"', ']', '\0')); | |
| TEST_STRINGENCODING_ERROR(UTF8<>, UTF16<>, unsigned char, ARRAY('[', '\"', 0xEDu, 0xAFu, 0xBFu, '\"', ']', '\0')); | |
| TEST_STRINGENCODING_ERROR(UTF8<>, UTF16<>, unsigned char, ARRAY('[', '\"', 0xEDu, 0xB0u, 0x80u, '\"', ']', '\0')); | |
| TEST_STRINGENCODING_ERROR(UTF8<>, UTF16<>, unsigned char, ARRAY('[', '\"', 0xEDu, 0xBEu, 0x80u, '\"', ']', '\0')); | |
| TEST_STRINGENCODING_ERROR(UTF8<>, UTF16<>, unsigned char, ARRAY('[', '\"', 0xEDu, 0xBFu, 0xBFu, '\"', ']', '\0')); | |
| // Malform UTF-16 sequences | |
| TEST_STRINGENCODING_ERROR(UTF16<>, UTF8<>, wchar_t, ARRAY('[', '\"', 0xDC00, 0xDC00, '\"', ']', '\0')); | |
| TEST_STRINGENCODING_ERROR(UTF16<>, UTF8<>, wchar_t, ARRAY('[', '\"', 0xD800, 0xD800, '\"', ']', '\0')); | |
| // Malform UTF-32 sequence | |
| TEST_STRINGENCODING_ERROR(UTF32<>, UTF8<>, unsigned, ARRAY('[', '\"', 0x110000, '\"', ']', '\0')); | |
| // Malform ASCII sequence | |
| TEST_STRINGENCODING_ERROR(ASCII<>, UTF8<>, char, ARRAY('[', '\"', char(0x80), '\"', ']', '\0')); | |
| #undef ARRAY | |
| #undef TEST_STRINGARRAY_ERROR | |
| } | |
| template <unsigned count> | |
| struct ParseArrayHandler : BaseReaderHandler<UTF8<>, ParseArrayHandler<count> > { | |
| ParseArrayHandler() : step_(0) {} | |
| bool Default() { ADD_FAILURE(); return false; } | |
| bool Uint(unsigned i) { EXPECT_EQ(step_, i); step_++; return true; } | |
| bool StartArray() { EXPECT_EQ(0u, step_); step_++; return true; } | |
| bool EndArray(SizeType) { step_++; return true; } | |
| unsigned step_; | |
| }; | |
| TEST(Reader, ParseEmptyArray) { | |
| char *json = StrDup("[ ] "); | |
| InsituStringStream s(json); | |
| ParseArrayHandler<0> h; | |
| Reader reader; | |
| reader.Parse(s, h); | |
| EXPECT_EQ(2u, h.step_); | |
| free(json); | |
| } | |
| TEST(Reader, ParseArray) { | |
| char *json = StrDup("[1, 2, 3, 4]"); | |
| InsituStringStream s(json); | |
| ParseArrayHandler<4> h; | |
| Reader reader; | |
| reader.Parse(s, h); | |
| EXPECT_EQ(6u, h.step_); | |
| free(json); | |
| } | |
| TEST(Reader, ParseArray_Error) { | |
| #define TEST_ARRAY_ERROR(errorCode, str, errorOffset) \ | |
| { \ | |
| char buffer[1001]; \ | |
| strncpy(buffer, str, 1000); \ | |
| InsituStringStream s(buffer); \ | |
| BaseReaderHandler<> h; \ | |
| GenericReader<UTF8<>, UTF8<>, CrtAllocator> reader; \ | |
| EXPECT_FALSE(reader.Parse(s, h)); \ | |
| EXPECT_EQ(errorCode, reader.GetParseErrorCode());\ | |
| EXPECT_EQ(errorOffset, reader.GetErrorOffset());\ | |
| } | |
| // Missing a comma or ']' after an array element. | |
| TEST_ARRAY_ERROR(kParseErrorArrayMissCommaOrSquareBracket, "[1", 2); | |
| TEST_ARRAY_ERROR(kParseErrorArrayMissCommaOrSquareBracket, "[1}", 2); | |
| TEST_ARRAY_ERROR(kParseErrorArrayMissCommaOrSquareBracket, "[1 2]", 3); | |
| #undef TEST_ARRAY_ERROR | |
| } | |
| struct ParseObjectHandler : BaseReaderHandler<UTF8<>, ParseObjectHandler> { | |
| ParseObjectHandler() : step_(0) {} | |
| bool Default() { ADD_FAILURE(); return false; } | |
| bool Null() { EXPECT_EQ(8u, step_); step_++; return true; } | |
| bool Bool(bool b) { | |
| switch(step_) { | |
| case 4: EXPECT_TRUE(b); step_++; return true; | |
| case 6: EXPECT_FALSE(b); step_++; return true; | |
| default: ADD_FAILURE(); return false; | |
| } | |
| } | |
| bool Int(int i) { | |
| switch(step_) { | |
| case 10: EXPECT_EQ(123, i); step_++; return true; | |
| case 15: EXPECT_EQ(1, i); step_++; return true; | |
| case 16: EXPECT_EQ(2, i); step_++; return true; | |
| case 17: EXPECT_EQ(3, i); step_++; return true; | |
| default: ADD_FAILURE(); return false; | |
| } | |
| } | |
| bool Uint(unsigned i) { return Int(static_cast<int>(i)); } | |
| bool Double(double d) { EXPECT_EQ(12u, step_); EXPECT_DOUBLE_EQ(3.1416, d); step_++; return true; } | |
| bool String(const char* str, size_t, bool) { | |
| switch(step_) { | |
| case 1: EXPECT_STREQ("hello", str); step_++; return true; | |
| case 2: EXPECT_STREQ("world", str); step_++; return true; | |
| case 3: EXPECT_STREQ("t", str); step_++; return true; | |
| case 5: EXPECT_STREQ("f", str); step_++; return true; | |
| case 7: EXPECT_STREQ("n", str); step_++; return true; | |
| case 9: EXPECT_STREQ("i", str); step_++; return true; | |
| case 11: EXPECT_STREQ("pi", str); step_++; return true; | |
| case 13: EXPECT_STREQ("a", str); step_++; return true; | |
| default: ADD_FAILURE(); return false; | |
| } | |
| } | |
| bool StartObject() { EXPECT_EQ(0u, step_); step_++; return true; } | |
| bool EndObject(SizeType memberCount) { EXPECT_EQ(19u, step_); EXPECT_EQ(7u, memberCount); step_++; return true; } | |
| bool StartArray() { EXPECT_EQ(14u, step_); step_++; return true; } | |
| bool EndArray(SizeType elementCount) { EXPECT_EQ(18u, step_); EXPECT_EQ(3u, elementCount); step_++; return true; } | |
| unsigned step_; | |
| }; | |
| TEST(Reader, ParseObject) { | |
| const char* json = "{ \"hello\" : \"world\", \"t\" : true , \"f\" : false, \"n\": null, \"i\":123, \"pi\": 3.1416, \"a\":[1, 2, 3] } "; | |
| // Insitu | |
| { | |
| char* json2 = StrDup(json); | |
| InsituStringStream s(json2); | |
| ParseObjectHandler h; | |
| Reader reader; | |
| reader.Parse<kParseInsituFlag>(s, h); | |
| EXPECT_EQ(20u, h.step_); | |
| free(json2); | |
| } | |
| // Normal | |
| { | |
| StringStream s(json); | |
| ParseObjectHandler h; | |
| Reader reader; | |
| reader.Parse(s, h); | |
| EXPECT_EQ(20u, h.step_); | |
| } | |
| } | |
| struct ParseEmptyObjectHandler : BaseReaderHandler<UTF8<>, ParseEmptyObjectHandler> { | |
| ParseEmptyObjectHandler() : step_(0) {} | |
| bool Default() { ADD_FAILURE(); return false; } | |
| bool StartObject() { EXPECT_EQ(0u, step_); step_++; return true; } | |
| bool EndObject(SizeType) { EXPECT_EQ(1u, step_); step_++; return true; } | |
| unsigned step_; | |
| }; | |
| TEST(Reader, Parse_EmptyObject) { | |
| StringStream s("{ } "); | |
| ParseEmptyObjectHandler h; | |
| Reader reader; | |
| reader.Parse(s, h); | |
| EXPECT_EQ(2u, h.step_); | |
| } | |
| struct ParseMultipleRootHandler : BaseReaderHandler<UTF8<>, ParseMultipleRootHandler> { | |
| ParseMultipleRootHandler() : step_(0) {} | |
| bool Default() { ADD_FAILURE(); return false; } | |
| bool StartObject() { EXPECT_EQ(0u, step_); step_++; return true; } | |
| bool EndObject(SizeType) { EXPECT_EQ(1u, step_); step_++; return true; } | |
| bool StartArray() { EXPECT_EQ(2u, step_); step_++; return true; } | |
| bool EndArray(SizeType) { EXPECT_EQ(3u, step_); step_++; return true; } | |
| unsigned step_; | |
| }; | |
| template <unsigned parseFlags> | |
| void TestMultipleRoot() { | |
| StringStream s("{}[] a"); | |
| ParseMultipleRootHandler h; | |
| Reader reader; | |
| EXPECT_TRUE(reader.Parse<parseFlags>(s, h)); | |
| EXPECT_EQ(2u, h.step_); | |
| EXPECT_TRUE(reader.Parse<parseFlags>(s, h)); | |
| EXPECT_EQ(4u, h.step_); | |
| EXPECT_EQ(' ', s.Take()); | |
| EXPECT_EQ('a', s.Take()); | |
| } | |
| TEST(Reader, Parse_MultipleRoot) { | |
| TestMultipleRoot<kParseStopWhenDoneFlag>(); | |
| } | |
| TEST(Reader, ParseIterative_MultipleRoot) { | |
| TestMultipleRoot<kParseIterativeFlag | kParseStopWhenDoneFlag>(); | |
| } | |
| template <unsigned parseFlags> | |
| void TestInsituMultipleRoot() { | |
| char* buffer = strdup("{}[] a"); | |
| InsituStringStream s(buffer); | |
| ParseMultipleRootHandler h; | |
| Reader reader; | |
| EXPECT_TRUE(reader.Parse<kParseInsituFlag | parseFlags>(s, h)); | |
| EXPECT_EQ(2u, h.step_); | |
| EXPECT_TRUE(reader.Parse<kParseInsituFlag | parseFlags>(s, h)); | |
| EXPECT_EQ(4u, h.step_); | |
| EXPECT_EQ(' ', s.Take()); | |
| EXPECT_EQ('a', s.Take()); | |
| free(buffer); | |
| } | |
| TEST(Reader, ParseInsitu_MultipleRoot) { | |
| TestInsituMultipleRoot<kParseStopWhenDoneFlag>(); | |
| } | |
| TEST(Reader, ParseInsituIterative_MultipleRoot) { | |
| TestInsituMultipleRoot<kParseIterativeFlag | kParseStopWhenDoneFlag>(); | |
| } | |
| #define TEST_ERROR(errorCode, str, errorOffset) \ | |
| { \ | |
| char buffer[1001]; \ | |
| strncpy(buffer, str, 1000); \ | |
| InsituStringStream s(buffer); \ | |
| BaseReaderHandler<> h; \ | |
| Reader reader; \ | |
| EXPECT_FALSE(reader.Parse(s, h)); \ | |
| EXPECT_EQ(errorCode, reader.GetParseErrorCode());\ | |
| EXPECT_EQ(errorOffset, reader.GetErrorOffset());\ | |
| } | |
| TEST(Reader, ParseDocument_Error) { | |
| // The document is empty. | |
| TEST_ERROR(kParseErrorDocumentEmpty, "", 0); | |
| TEST_ERROR(kParseErrorDocumentEmpty, " ", 1); | |
| TEST_ERROR(kParseErrorDocumentEmpty, " \n", 2); | |
| // The document root must not follow by other values. | |
| TEST_ERROR(kParseErrorDocumentRootNotSingular, "[] 0", 3); | |
| TEST_ERROR(kParseErrorDocumentRootNotSingular, "{} 0", 3); | |
| TEST_ERROR(kParseErrorDocumentRootNotSingular, "null []", 5); | |
| TEST_ERROR(kParseErrorDocumentRootNotSingular, "0 {}", 2); | |
| } | |
| TEST(Reader, ParseValue_Error) { | |
| // Invalid value. | |
| TEST_ERROR(kParseErrorValueInvalid, "nulL", 3); | |
| TEST_ERROR(kParseErrorValueInvalid, "truE", 3); | |
| TEST_ERROR(kParseErrorValueInvalid, "falsE", 4); | |
| TEST_ERROR(kParseErrorValueInvalid, "a]", 0); | |
| TEST_ERROR(kParseErrorValueInvalid, ".1", 0); | |
| } | |
| TEST(Reader, ParseObject_Error) { | |
| // Missing a name for object member. | |
| TEST_ERROR(kParseErrorObjectMissName, "{1}", 1); | |
| TEST_ERROR(kParseErrorObjectMissName, "{:1}", 1); | |
| TEST_ERROR(kParseErrorObjectMissName, "{null:1}", 1); | |
| TEST_ERROR(kParseErrorObjectMissName, "{true:1}", 1); | |
| TEST_ERROR(kParseErrorObjectMissName, "{false:1}", 1); | |
| TEST_ERROR(kParseErrorObjectMissName, "{1:1}", 1); | |
| TEST_ERROR(kParseErrorObjectMissName, "{[]:1}", 1); | |
| TEST_ERROR(kParseErrorObjectMissName, "{{}:1}", 1); | |
| TEST_ERROR(kParseErrorObjectMissName, "{xyz:1}", 1); | |
| // Missing a colon after a name of object member. | |
| TEST_ERROR(kParseErrorObjectMissColon, "{\"a\" 1}", 5); | |
| TEST_ERROR(kParseErrorObjectMissColon, "{\"a\",1}", 4); | |
| // Must be a comma or '}' after an object member | |
| TEST_ERROR(kParseErrorObjectMissCommaOrCurlyBracket, "{\"a\":1]", 6); | |
| // This tests that MemoryStream is checking the length in Peek(). | |
| { | |
| MemoryStream ms("{\"a\"", 1); | |
| BaseReaderHandler<> h; | |
| Reader reader; | |
| EXPECT_FALSE(reader.Parse<kParseStopWhenDoneFlag>(ms, h)); | |
| EXPECT_EQ(kParseErrorObjectMissName, reader.GetParseErrorCode()); | |
| } | |
| } | |
| #undef TEST_ERROR | |
| TEST(Reader, SkipWhitespace) { | |
| StringStream ss(" A \t\tB\n \n\nC\r\r \rD \t\n\r E"); | |
| const char* expected = "ABCDE"; | |
| for (size_t i = 0; i < 5; i++) { | |
| SkipWhitespace(ss); | |
| EXPECT_EQ(expected[i], ss.Take()); | |
| } | |
| } | |
| // Test implementing a stream without copy stream optimization. | |
| // Clone from GenericStringStream except that copy constructor is disabled. | |
| template <typename Encoding> | |
| class CustomStringStream { | |
| public: | |
| typedef typename Encoding::Ch Ch; | |
| CustomStringStream(const Ch *src) : src_(src), head_(src) {} | |
| Ch Peek() const { return *src_; } | |
| Ch Take() { return *src_++; } | |
| size_t Tell() const { return static_cast<size_t>(src_ - head_); } | |
| Ch* PutBegin() { RAPIDJSON_ASSERT(false); return 0; } | |
| void Put(Ch) { RAPIDJSON_ASSERT(false); } | |
| void Flush() { RAPIDJSON_ASSERT(false); } | |
| size_t PutEnd(Ch*) { RAPIDJSON_ASSERT(false); return 0; } | |
| private: | |
| // Prohibit copy constructor & assignment operator. | |
| CustomStringStream(const CustomStringStream&); | |
| CustomStringStream& operator=(const CustomStringStream&); | |
| const Ch* src_; //!< Current read position. | |
| const Ch* head_; //!< Original head of the string. | |
| }; | |
| // If the following code is compiled, it should generate compilation error as predicted. | |
| // Because CustomStringStream<> is not copyable via making copy constructor private. | |
| #if 0 | |
| namespace rapidjson { | |
| template <typename Encoding> | |
| struct StreamTraits<CustomStringStream<Encoding> > { | |
| enum { copyOptimization = 1 }; | |
| }; | |
| } // namespace rapidjson | |
| #endif | |
| TEST(Reader, CustomStringStream) { | |
| const char* json = "{ \"hello\" : \"world\", \"t\" : true , \"f\" : false, \"n\": null, \"i\":123, \"pi\": 3.1416, \"a\":[1, 2, 3] } "; | |
| CustomStringStream<UTF8<char> > s(json); | |
| ParseObjectHandler h; | |
| Reader reader; | |
| reader.Parse(s, h); | |
| EXPECT_EQ(20u, h.step_); | |
| } | |
| #include <sstream> | |
| class IStreamWrapper { | |
| public: | |
| typedef char Ch; | |
| IStreamWrapper(std::istream& is) : is_(is) {} | |
| Ch Peek() const { | |
| int c = is_.peek(); | |
| return c == std::char_traits<char>::eof() ? '\0' : static_cast<Ch>(c); | |
| } | |
| Ch Take() { | |
| int c = is_.get(); | |
| return c == std::char_traits<char>::eof() ? '\0' : static_cast<Ch>(c); | |
| } | |
| size_t Tell() const { return static_cast<size_t>(is_.tellg()); } | |
| Ch* PutBegin() { assert(false); return 0; } | |
| void Put(Ch) { assert(false); } | |
| void Flush() { assert(false); } | |
| size_t PutEnd(Ch*) { assert(false); return 0; } | |
| private: | |
| IStreamWrapper(const IStreamWrapper&); | |
| IStreamWrapper& operator=(const IStreamWrapper&); | |
| std::istream& is_; | |
| }; | |
| TEST(Reader, Parse_IStreamWrapper_StringStream) { | |
| const char* json = "[1,2,3,4]"; | |
| std::stringstream ss(json); | |
| IStreamWrapper is(ss); | |
| Reader reader; | |
| ParseArrayHandler<4> h; | |
| reader.Parse(is, h); | |
| EXPECT_FALSE(reader.HasParseError()); | |
| } | |
| // Test iterative parsing. | |
| #define TESTERRORHANDLING(text, errorCode, offset)\ | |
| {\ | |
| StringStream json(text); \ | |
| BaseReaderHandler<> handler; \ | |
| Reader reader; \ | |
| reader.Parse<kParseIterativeFlag>(json, handler); \ | |
| EXPECT_TRUE(reader.HasParseError()); \ | |
| EXPECT_EQ(errorCode, reader.GetParseErrorCode()); \ | |
| EXPECT_EQ(offset, reader.GetErrorOffset()); \ | |
| } | |
| TEST(Reader, IterativeParsing_ErrorHandling) { | |
| TESTERRORHANDLING("{\"a\": a}", kParseErrorValueInvalid, 6u); | |
| TESTERRORHANDLING("", kParseErrorDocumentEmpty, 0u); | |
| TESTERRORHANDLING("{}{}", kParseErrorDocumentRootNotSingular, 2u); | |
| TESTERRORHANDLING("{1}", kParseErrorObjectMissName, 1u); | |
| TESTERRORHANDLING("{\"a\", 1}", kParseErrorObjectMissColon, 4u); | |
| TESTERRORHANDLING("{\"a\"}", kParseErrorObjectMissColon, 4u); | |
| TESTERRORHANDLING("{\"a\": 1", kParseErrorObjectMissCommaOrCurlyBracket, 7u); | |
| TESTERRORHANDLING("[1 2 3]", kParseErrorArrayMissCommaOrSquareBracket, 3u); | |
| TESTERRORHANDLING("{\"a: 1", kParseErrorStringMissQuotationMark, 6u); | |
| // Any JSON value can be a valid root element in RFC7159. | |
| TESTERRORHANDLING("\"ab", kParseErrorStringMissQuotationMark, 3u); | |
| TESTERRORHANDLING("truE", kParseErrorValueInvalid, 3u); | |
| TESTERRORHANDLING("False", kParseErrorValueInvalid, 0u); | |
| TESTERRORHANDLING("true, false", kParseErrorDocumentRootNotSingular, 4u); | |
| TESTERRORHANDLING("false, false", kParseErrorDocumentRootNotSingular, 5u); | |
| TESTERRORHANDLING("nulL", kParseErrorValueInvalid, 3u); | |
| TESTERRORHANDLING("null , null", kParseErrorDocumentRootNotSingular, 5u); | |
| TESTERRORHANDLING("1a", kParseErrorDocumentRootNotSingular, 1u); | |
| } | |
| template<typename Encoding = UTF8<> > | |
| struct IterativeParsingReaderHandler { | |
| typedef typename Encoding::Ch Ch; | |
| const static int LOG_NULL = -1; | |
| const static int LOG_BOOL = -2; | |
| const static int LOG_INT = -3; | |
| const static int LOG_UINT = -4; | |
| const static int LOG_INT64 = -5; | |
| const static int LOG_UINT64 = -6; | |
| const static int LOG_DOUBLE = -7; | |
| const static int LOG_STRING = -8; | |
| const static int LOG_STARTOBJECT = -9; | |
| const static int LOG_KEY = -10; | |
| const static int LOG_ENDOBJECT = -11; | |
| const static int LOG_STARTARRAY = -12; | |
| const static int LOG_ENDARRAY = -13; | |
| const static size_t LogCapacity = 256; | |
| int Logs[LogCapacity]; | |
| size_t LogCount; | |
| IterativeParsingReaderHandler() : LogCount(0) { | |
| } | |
| bool Null() { RAPIDJSON_ASSERT(LogCount < LogCapacity); Logs[LogCount++] = LOG_NULL; return true; } | |
| bool Bool(bool) { RAPIDJSON_ASSERT(LogCount < LogCapacity); Logs[LogCount++] = LOG_BOOL; return true; } | |
| bool Int(int) { RAPIDJSON_ASSERT(LogCount < LogCapacity); Logs[LogCount++] = LOG_INT; return true; } | |
| bool Uint(unsigned) { RAPIDJSON_ASSERT(LogCount < LogCapacity); Logs[LogCount++] = LOG_INT; return true; } | |
| bool Int64(int64_t) { RAPIDJSON_ASSERT(LogCount < LogCapacity); Logs[LogCount++] = LOG_INT64; return true; } | |
| bool Uint64(uint64_t) { RAPIDJSON_ASSERT(LogCount < LogCapacity); Logs[LogCount++] = LOG_UINT64; return true; } | |
| bool Double(double) { RAPIDJSON_ASSERT(LogCount < LogCapacity); Logs[LogCount++] = LOG_DOUBLE; return true; } | |
| bool String(const Ch*, SizeType, bool) { RAPIDJSON_ASSERT(LogCount < LogCapacity); Logs[LogCount++] = LOG_STRING; return true; } | |
| bool StartObject() { RAPIDJSON_ASSERT(LogCount < LogCapacity); Logs[LogCount++] = LOG_STARTOBJECT; return true; } | |
| bool Key (const Ch*, SizeType, bool) { RAPIDJSON_ASSERT(LogCount < LogCapacity); Logs[LogCount++] = LOG_KEY; return true; } | |
| bool EndObject(SizeType c) { | |
| RAPIDJSON_ASSERT(LogCount < LogCapacity); | |
| Logs[LogCount++] = LOG_ENDOBJECT; | |
| Logs[LogCount++] = static_cast<int>(c); | |
| return true; | |
| } | |
| bool StartArray() { RAPIDJSON_ASSERT(LogCount < LogCapacity); Logs[LogCount++] = LOG_STARTARRAY; return true; } | |
| bool EndArray(SizeType c) { | |
| RAPIDJSON_ASSERT(LogCount < LogCapacity); | |
| Logs[LogCount++] = LOG_ENDARRAY; | |
| Logs[LogCount++] = static_cast<int>(c); | |
| return true; | |
| } | |
| }; | |
| TEST(Reader, IterativeParsing_General) { | |
| { | |
| StringStream is("[1, {\"k\": [1, 2]}, null, false, true, \"string\", 1.2]"); | |
| Reader reader; | |
| IterativeParsingReaderHandler<> handler; | |
| ParseResult r = reader.Parse<kParseIterativeFlag>(is, handler); | |
| EXPECT_FALSE(r.IsError()); | |
| EXPECT_FALSE(reader.HasParseError()); | |
| int e[] = { | |
| handler.LOG_STARTARRAY, | |
| handler.LOG_INT, | |
| handler.LOG_STARTOBJECT, | |
| handler.LOG_KEY, | |
| handler.LOG_STARTARRAY, | |
| handler.LOG_INT, | |
| handler.LOG_INT, | |
| handler.LOG_ENDARRAY, 2, | |
| handler.LOG_ENDOBJECT, 1, | |
| handler.LOG_NULL, | |
| handler.LOG_BOOL, | |
| handler.LOG_BOOL, | |
| handler.LOG_STRING, | |
| handler.LOG_DOUBLE, | |
| handler.LOG_ENDARRAY, 7 | |
| }; | |
| EXPECT_EQ(sizeof(e) / sizeof(int), handler.LogCount); | |
| for (size_t i = 0; i < handler.LogCount; ++i) { | |
| EXPECT_EQ(e[i], handler.Logs[i]) << "i = " << i; | |
| } | |
| } | |
| } | |
| TEST(Reader, IterativeParsing_Count) { | |
| { | |
| StringStream is("[{}, {\"k\": 1}, [1], []]"); | |
| Reader reader; | |
| IterativeParsingReaderHandler<> handler; | |
| ParseResult r = reader.Parse<kParseIterativeFlag>(is, handler); | |
| EXPECT_FALSE(r.IsError()); | |
| EXPECT_FALSE(reader.HasParseError()); | |
| int e[] = { | |
| handler.LOG_STARTARRAY, | |
| handler.LOG_STARTOBJECT, | |
| handler.LOG_ENDOBJECT, 0, | |
| handler.LOG_STARTOBJECT, | |
| handler.LOG_KEY, | |
| handler.LOG_INT, | |
| handler.LOG_ENDOBJECT, 1, | |
| handler.LOG_STARTARRAY, | |
| handler.LOG_INT, | |
| handler.LOG_ENDARRAY, 1, | |
| handler.LOG_STARTARRAY, | |
| handler.LOG_ENDARRAY, 0, | |
| handler.LOG_ENDARRAY, 4 | |
| }; | |
| EXPECT_EQ(sizeof(e) / sizeof(int), handler.LogCount); | |
| for (size_t i = 0; i < handler.LogCount; ++i) { | |
| EXPECT_EQ(e[i], handler.Logs[i]) << "i = " << i; | |
| } | |
| } | |
| } | |
| // Test iterative parsing on kParseErrorTermination. | |
| struct HandlerTerminateAtStartObject : public IterativeParsingReaderHandler<> { | |
| bool StartObject() { return false; } | |
| }; | |
| struct HandlerTerminateAtStartArray : public IterativeParsingReaderHandler<> { | |
| bool StartArray() { return false; } | |
| }; | |
| struct HandlerTerminateAtEndObject : public IterativeParsingReaderHandler<> { | |
| bool EndObject(SizeType) { return false; } | |
| }; | |
| struct HandlerTerminateAtEndArray : public IterativeParsingReaderHandler<> { | |
| bool EndArray(SizeType) { return false; } | |
| }; | |
| TEST(Reader, IterativeParsing_ShortCircuit) { | |
| { | |
| HandlerTerminateAtStartObject handler; | |
| Reader reader; | |
| StringStream is("[1, {}]"); | |
| ParseResult r = reader.Parse<kParseIterativeFlag>(is, handler); | |
| EXPECT_TRUE(reader.HasParseError()); | |
| EXPECT_EQ(kParseErrorTermination, r.Code()); | |
| EXPECT_EQ(4u, r.Offset()); | |
| } | |
| { | |
| HandlerTerminateAtStartArray handler; | |
| Reader reader; | |
| StringStream is("{\"a\": []}"); | |
| ParseResult r = reader.Parse<kParseIterativeFlag>(is, handler); | |
| EXPECT_TRUE(reader.HasParseError()); | |
| EXPECT_EQ(kParseErrorTermination, r.Code()); | |
| EXPECT_EQ(6u, r.Offset()); | |
| } | |
| { | |
| HandlerTerminateAtEndObject handler; | |
| Reader reader; | |
| StringStream is("[1, {}]"); | |
| ParseResult r = reader.Parse<kParseIterativeFlag>(is, handler); | |
| EXPECT_TRUE(reader.HasParseError()); | |
| EXPECT_EQ(kParseErrorTermination, r.Code()); | |
| EXPECT_EQ(5u, r.Offset()); | |
| } | |
| { | |
| HandlerTerminateAtEndArray handler; | |
| Reader reader; | |
| StringStream is("{\"a\": []}"); | |
| ParseResult r = reader.Parse<kParseIterativeFlag>(is, handler); | |
| EXPECT_TRUE(reader.HasParseError()); | |
| EXPECT_EQ(kParseErrorTermination, r.Code()); | |
| EXPECT_EQ(7u, r.Offset()); | |
| } | |
| } | |
| // For covering BaseReaderHandler default functions | |
| TEST(Reader, BaseReaderHandler_Default) { | |
| BaseReaderHandler<> h; | |
| Reader reader; | |
| StringStream is("[null, true, -1, 1, -1234567890123456789, 1234567890123456789, 3.14, \"s\", { \"a\" : 1 }]"); | |
| EXPECT_TRUE(reader.Parse(is, h)); | |
| } | |
| template <int e> | |
| struct TerminateHandler { | |
| bool Null() { return e != 0; } | |
| bool Bool(bool) { return e != 1; } | |
| bool Int(int) { return e != 2; } | |
| bool Uint(unsigned) { return e != 3; } | |
| bool Int64(int64_t) { return e != 4; } | |
| bool Uint64(uint64_t) { return e != 5; } | |
| bool Double(double) { return e != 6; } | |
| bool String(const char*, SizeType, bool) { return e != 7; } | |
| bool StartObject() { return e != 8; } | |
| bool Key(const char*, SizeType, bool) { return e != 9; } | |
| bool EndObject(SizeType) { return e != 10; } | |
| bool StartArray() { return e != 11; } | |
| bool EndArray(SizeType) { return e != 12; } | |
| }; | |
| #define TEST_TERMINATION(e, json)\ | |
| {\ | |
| Reader reader;\ | |
| TerminateHandler<e> h;\ | |
| StringStream is(json);\ | |
| EXPECT_FALSE(reader.Parse(is, h));\ | |
| EXPECT_EQ(kParseErrorTermination, reader.GetParseErrorCode());\ | |
| } | |
| TEST(Reader, ParseTerminationByHandler) { | |
| TEST_TERMINATION(0, "[null"); | |
| TEST_TERMINATION(1, "[true"); | |
| TEST_TERMINATION(1, "[false"); | |
| TEST_TERMINATION(2, "[-1"); | |
| TEST_TERMINATION(3, "[1"); | |
| TEST_TERMINATION(4, "[-1234567890123456789"); | |
| TEST_TERMINATION(5, "[1234567890123456789"); | |
| TEST_TERMINATION(6, "[0.5]"); | |
| TEST_TERMINATION(7, "[\"a\""); | |
| TEST_TERMINATION(8, "[{"); | |
| TEST_TERMINATION(9, "[{\"a\""); | |
| TEST_TERMINATION(10, "[{}"); | |
| TEST_TERMINATION(10, "[{\"a\":1}"); // non-empty object | |
| TEST_TERMINATION(11, "{\"a\":["); | |
| TEST_TERMINATION(12, "{\"a\":[]"); | |
| TEST_TERMINATION(12, "{\"a\":[1]"); // non-empty array | |
| } | |
| TEST(Reader, ParseComments) { | |
| const char* json = | |
| "// Here is a one-line comment.\n" | |
| "{// And here's another one\n" | |
| " /*And here's an in-line one.*/\"hello\" : \"world\"," | |
| " \"t\" :/* And one with '*' symbol*/true ," | |
| "/* A multiline comment\n" | |
| " goes here*/" | |
| " \"f\" : false, \"n\": null, \"i\":123, \"pi\": 3.1416, \"a\":[1, 2, 3]" | |
| "}/*And the last one to be sure */"; | |
| StringStream s(json); | |
| ParseObjectHandler h; | |
| Reader reader; | |
| EXPECT_TRUE(reader.Parse<kParseCommentsFlag>(s, h)); | |
| EXPECT_EQ(20u, h.step_); | |
| } | |
| TEST(Reader, ParseEmptyInlineComment) { | |
| const char* json = "{/**/\"hello\" : \"world\", \"t\" : true, \"f\" : false, \"n\": null, \"i\":123, \"pi\": 3.1416, \"a\":[1, 2, 3] }"; | |
| StringStream s(json); | |
| ParseObjectHandler h; | |
| Reader reader; | |
| EXPECT_TRUE(reader.Parse<kParseCommentsFlag>(s, h)); | |
| EXPECT_EQ(20u, h.step_); | |
| } | |
| TEST(Reader, ParseEmptyOnelineComment) { | |
| const char* json = "{//\n\"hello\" : \"world\", \"t\" : true, \"f\" : false, \"n\": null, \"i\":123, \"pi\": 3.1416, \"a\":[1, 2, 3] }"; | |
| StringStream s(json); | |
| ParseObjectHandler h; | |
| Reader reader; | |
| EXPECT_TRUE(reader.Parse<kParseCommentsFlag>(s, h)); | |
| EXPECT_EQ(20u, h.step_); | |
| } | |
| TEST(Reader, ParseMultipleCommentsInARow) { | |
| const char* json = | |
| "{/* first comment *//* second */\n" | |
| "/* third */ /*fourth*/// last one\n" | |
| "\"hello\" : \"world\", \"t\" : true, \"f\" : false, \"n\": null, \"i\":123, \"pi\": 3.1416, \"a\":[1, 2, 3] }"; | |
| StringStream s(json); | |
| ParseObjectHandler h; | |
| Reader reader; | |
| EXPECT_TRUE(reader.Parse<kParseCommentsFlag>(s, h)); | |
| EXPECT_EQ(20u, h.step_); | |
| } | |
| TEST(Reader, InlineCommentsAreDisabledByDefault) { | |
| { | |
| const char* json = "{/* Inline comment. */\"hello\" : \"world\", \"t\" : true, \"f\" : false, \"n\": null, \"i\":123, \"pi\": 3.1416, \"a\":[1, 2, 3] }"; | |
| StringStream s(json); | |
| ParseObjectHandler h; | |
| Reader reader; | |
| EXPECT_FALSE(reader.Parse<kParseDefaultFlags>(s, h)); | |
| } | |
| { | |
| const char* json = | |
| "{\"hello\" : /* Multiline comment starts here\n" | |
| " continues here\n" | |
| " and ends here */\"world\", \"t\" :true , \"f\" : false, \"n\": null, \"i\":123, \"pi\": 3.1416, \"a\":[1, 2, 3] }"; | |
| StringStream s(json); | |
| ParseObjectHandler h; | |
| Reader reader; | |
| EXPECT_FALSE(reader.Parse<kParseDefaultFlags>(s, h)); | |
| } | |
| } | |
| TEST(Reader, OnelineCommentsAreDisabledByDefault) { | |
| const char* json = "{// One-line comment\n\"hello\" : \"world\", \"t\" : true , \"f\" : false, \"n\": null, \"i\":123, \"pi\": 3.1416, \"a\":[1, 2, 3] }"; | |
| StringStream s(json); | |
| ParseObjectHandler h; | |
| Reader reader; | |
| EXPECT_FALSE(reader.Parse<kParseDefaultFlags>(s, h)); | |
| } | |
| TEST(Reader, EofAfterOneLineComment) { | |
| const char* json = "{\"hello\" : \"world\" // EOF is here -->\0 \n}"; | |
| StringStream s(json); | |
| ParseObjectHandler h; | |
| Reader reader; | |
| EXPECT_FALSE(reader.Parse<kParseCommentsFlag>(s, h)); | |
| EXPECT_EQ(kParseErrorObjectMissCommaOrCurlyBracket, reader.GetParseErrorCode()); | |
| } | |
| TEST(Reader, IncompleteMultilineComment) { | |
| const char* json = "{\"hello\" : \"world\" /* EOF is here -->\0 */}"; | |
| StringStream s(json); | |
| ParseObjectHandler h; | |
| Reader reader; | |
| EXPECT_FALSE(reader.Parse<kParseCommentsFlag>(s, h)); | |
| EXPECT_EQ(kParseErrorUnspecificSyntaxError, reader.GetParseErrorCode()); | |
| } | |
| TEST(Reader, IncompleteMultilineComment2) { | |
| const char* json = "{\"hello\" : \"world\" /* *\0 */}"; | |
| StringStream s(json); | |
| ParseObjectHandler h; | |
| Reader reader; | |
| EXPECT_FALSE(reader.Parse<kParseCommentsFlag>(s, h)); | |
| EXPECT_EQ(kParseErrorUnspecificSyntaxError, reader.GetParseErrorCode()); | |
| } | |
| TEST(Reader, UnrecognizedComment) { | |
| const char* json = "{\"hello\" : \"world\" /! }"; | |
| StringStream s(json); | |
| ParseObjectHandler h; | |
| Reader reader; | |
| EXPECT_FALSE(reader.Parse<kParseCommentsFlag>(s, h)); | |
| EXPECT_EQ(kParseErrorUnspecificSyntaxError, reader.GetParseErrorCode()); | |
| } | |
| #ifdef __GNUC__ | |
| RAPIDJSON_DIAG_POP | |
| #endif | |
| #ifdef __clang__ | |
| RAPIDJSON_DIAG_POP | |
| #endif |