| /*************************************************************************** |
| * _ _ ____ _ |
| * Project ___| | | | _ \| | |
| * / __| | | | |_) | | |
| * | (__| |_| | _ <| |___ |
| * \___|\___/|_| \_\_____| |
| * |
| * Copyright (C) Daniel Stenberg, <[email protected]>, et al. |
| * |
| * This software is licensed as described in the file COPYING, which |
| * you should have received as part of this distribution. The terms |
| * are also available at https://curl.se/docs/copyright.html. |
| * |
| * You may opt to use, copy, modify, merge, publish, distribute and/or sell |
| * copies of the Software, and permit persons to whom the Software is |
| * furnished to do so, under the terms of the COPYING file. |
| * |
| * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY |
| * KIND, either express or implied. |
| * |
| * SPDX-License-Identifier: curl |
| * |
| ***************************************************************************/ |
| /* |
| * Source file for all OpenSSL-specific code for the TLS/SSL layer. No code |
| * but vtls.c should ever call or use these functions. |
| */ |
| #include "../curl_setup.h" |
| |
| #if defined(USE_QUICHE) || defined(USE_OPENSSL) |
| |
| /* Wincrypt must be included before anything that could include OpenSSL. */ |
| #ifdef USE_WIN32_CRYPTO |
| #include <wincrypt.h> |
| /* Undefine wincrypt conflicting symbols for BoringSSL. */ |
| #undef X509_NAME |
| #undef X509_EXTENSIONS |
| #undef PKCS7_ISSUER_AND_SERIAL |
| #undef PKCS7_SIGNER_INFO |
| #undef OCSP_REQUEST |
| #undef OCSP_RESPONSE |
| #endif |
| |
| #include "../urldata.h" |
| #include "../curl_trc.h" |
| #include "../formdata.h" /* for the boundary function */ |
| #include "../url.h" /* for the ssl config check function */ |
| #include "../curlx/inet_pton.h" |
| #include "openssl.h" |
| #include "../connect.h" |
| #include "../progress.h" |
| #include "vtls.h" |
| #include "vtls_int.h" |
| #include "vtls_scache.h" |
| #include "../vauth/vauth.h" |
| #include "keylog.h" |
| #include "hostcheck.h" |
| #include "../transfer.h" |
| #include "../multiif.h" |
| #include "../curlx/strerr.h" |
| #include "../curlx/strparse.h" |
| #include "../curlx/strcopy.h" |
| #include "../strdup.h" |
| #include "apple.h" |
| |
| #include <openssl/rand.h> |
| #include <openssl/x509v3.h> |
| #ifndef OPENSSL_NO_DSA |
| #include <openssl/dsa.h> |
| #endif |
| #include <openssl/dh.h> |
| #include <openssl/err.h> |
| #include <openssl/conf.h> |
| #include <openssl/bn.h> |
| #include <openssl/rsa.h> |
| #include <openssl/bio.h> |
| #include <openssl/pkcs12.h> |
| #include <openssl/tls1.h> |
| #include <openssl/evp.h> |
| |
| #if defined(HAVE_SSL_SET1_ECH_CONFIG_LIST) && !defined(HAVE_BORINGSSL_LIKE) |
| #include <openssl/ech.h> |
| #endif |
| |
| #ifndef OPENSSL_NO_OCSP |
| #include <openssl/ocsp.h> |
| #endif |
| |
| #if !defined(OPENSSL_NO_ENGINE) && !defined(OPENSSL_NO_UI_CONSOLE) |
| #define USE_OPENSSL_ENGINE |
| #include <openssl/engine.h> |
| #endif |
| |
| #ifdef LIBRESSL_VERSION_NUMBER |
| /* As of LibreSSL 2.0.0-4.0.0: OPENSSL_VERSION_NUMBER == 0x20000000L */ |
| # if LIBRESSL_VERSION_NUMBER < 0x2090100fL /* 2019-04-13 */ |
| # error "LibreSSL 2.9.1 or later required" |
| # endif |
| #elif !defined(HAVE_BORINGSSL_LIKE) |
| # ifndef HAVE_OPENSSL3 /* 2021-09-07 */ |
| # error "OpenSSL 3.0.0 or later required" |
| # endif |
| #endif |
| |
| #if defined(HAVE_OPENSSL3) && !defined(OPENSSL_NO_UI_CONSOLE) |
| #include <openssl/provider.h> |
| #include <openssl/store.h> |
| /* this is used in the following conditions to make them easier to read */ |
| #define OPENSSL_HAS_PROVIDERS |
| |
| static void ossl_provider_cleanup(struct Curl_easy *data); |
| #endif |
| |
| /* AWS-LC fixed a bug with large buffers in v1.61.0 which also introduced |
| * X509_V_ERR_EC_KEY_EXPLICIT_PARAMS. */ |
| #if !defined(LIBRESSL_VERSION_NUMBER) && !defined(OPENSSL_IS_BORINGSSL) && \ |
| (!defined(OPENSSL_IS_AWSLC) || defined(X509_V_ERR_EC_KEY_EXPLICIT_PARAMS)) |
| #define HAVE_SSL_CTX_SET_DEFAULT_READ_BUFFER_LEN 1 |
| #endif |
| |
| #if defined(USE_OPENSSL_ENGINE) || defined(OPENSSL_HAS_PROVIDERS) |
| #include <openssl/ui.h> |
| #endif |
| |
| #ifdef HAVE_OPENSSL3 |
| #define HAVE_EVP_PKEY_GET_PARAMS 1 |
| #endif |
| |
| #ifdef HAVE_EVP_PKEY_GET_PARAMS |
| #include <openssl/core_names.h> |
| #define DECLARE_PKEY_PARAM_BIGNUM(name) BIGNUM *name = NULL |
| #define FREE_PKEY_PARAM_BIGNUM(name) BN_clear_free(name) |
| #else |
| #define DECLARE_PKEY_PARAM_BIGNUM(name) const BIGNUM *name |
| #define FREE_PKEY_PARAM_BIGNUM(name) |
| #endif |
| |
| /* Whether SSL_CTX_set_ciphersuites is available. |
| * OpenSSL: supported since 1.1.1 (commit a53b5be6a05) |
| * BoringSSL: no |
| * LibreSSL: supported since 3.4.1 (released 2021-10-14) |
| */ |
| #if (!defined(LIBRESSL_VERSION_NUMBER) || \ |
| (defined(LIBRESSL_VERSION_NUMBER) && \ |
| LIBRESSL_VERSION_NUMBER >= 0x3040100fL)) && \ |
| !defined(OPENSSL_IS_BORINGSSL) |
| # define HAVE_SSL_CTX_SET_CIPHERSUITES |
| # ifndef OPENSSL_IS_AWSLC |
| # define HAVE_SSL_CTX_SET_POST_HANDSHAKE_AUTH |
| # endif |
| #endif |
| |
| /* Whether SSL_CTX_set1_sigalgs_list is available |
| * OpenSSL: supported since 1.0.2 (commit 0b362de5f575) |
| * BoringSSL: supported since 0.20240913.0 (commit 826ce15) |
| * LibreSSL: no |
| */ |
| #ifndef LIBRESSL_VERSION_NUMBER |
| #define HAVE_SSL_CTX_SET1_SIGALGS |
| #endif |
| |
| #ifdef LIBRESSL_VERSION_NUMBER |
| #define OSSL_PACKAGE "LibreSSL" |
| #elif defined(OPENSSL_IS_BORINGSSL) |
| #define OSSL_PACKAGE "BoringSSL" |
| #elif defined(OPENSSL_IS_AWSLC) |
| #define OSSL_PACKAGE "AWS-LC" |
| #elif defined(USE_NGTCP2) && defined(USE_NGHTTP3) && \ |
| !defined(OPENSSL_QUIC_API2) |
| #define OSSL_PACKAGE "quictls" |
| #else |
| #define OSSL_PACKAGE "OpenSSL" |
| #endif |
| |
| #ifdef HAVE_BORINGSSL_LIKE |
| typedef size_t numcert_t; |
| typedef uint32_t sslerr_t; |
| #else |
| typedef int numcert_t; |
| typedef unsigned long sslerr_t; |
| #endif |
| #define ossl_valsize_t numcert_t |
| |
| static CURLcode ossl_certchain(struct Curl_easy *data, SSL *ssl); |
| |
| static CURLcode push_certinfo(struct Curl_easy *data, |
| BIO *mem, const char *label, int num) |
| WARN_UNUSED_RESULT; |
| |
| static CURLcode push_certinfo(struct Curl_easy *data, |
| BIO *mem, const char *label, int num) |
| { |
| char *ptr; |
| long len = BIO_get_mem_data(mem, &ptr); |
| CURLcode result = Curl_ssl_push_certinfo_len(data, num, label, ptr, len); |
| (void)BIO_reset(mem); |
| return result; |
| } |
| |
| static CURLcode pubkey_show(struct Curl_easy *data, |
| BIO *mem, |
| int num, |
| const char *type, |
| const char *name, |
| const BIGNUM *bn) WARN_UNUSED_RESULT; |
| |
| static CURLcode pubkey_show(struct Curl_easy *data, |
| BIO *mem, |
| int num, |
| const char *type, |
| const char *name, |
| const BIGNUM *bn) |
| { |
| char namebuf[32]; |
| |
| curl_msnprintf(namebuf, sizeof(namebuf), "%s(%s)", type, name); |
| |
| if(bn) |
| BN_print(mem, bn); |
| return push_certinfo(data, mem, namebuf, num); |
| } |
| |
| #define print_pubkey_BN(_type, _name, _num) \ |
| pubkey_show(data, mem, _num, #_type, #_name, _name) |
| |
| static int asn1_object_dump(const ASN1_OBJECT *a, char *buf, size_t len) |
| { |
| int i = i2t_ASN1_OBJECT(buf, (int)len, a); |
| return (i >= (int)len); /* buffer too small */ |
| } |
| |
| static CURLcode X509V3_ext(struct Curl_easy *data, |
| int certnum, |
| const STACK_OF(X509_EXTENSION) *extsarg) |
| { |
| int i; |
| CURLcode result = CURLE_OK; |
| #ifdef LIBRESSL_VERSION_NUMBER |
| STACK_OF(X509_EXTENSION) *exts = CURL_UNCONST(extsarg); |
| #else |
| const STACK_OF(X509_EXTENSION) *exts = extsarg; |
| #endif |
| |
| if((int)sk_X509_EXTENSION_num(exts) <= 0) |
| /* no extensions, bail out */ |
| return result; |
| |
| for(i = 0; i < (int)sk_X509_EXTENSION_num(exts); i++) { |
| ASN1_OBJECT *obj; |
| X509_EXTENSION *ext = sk_X509_EXTENSION_value(exts, (ossl_valsize_t)i); |
| BUF_MEM *biomem; |
| char namebuf[128]; |
| BIO *bio_out = BIO_new(BIO_s_mem()); |
| |
| if(!bio_out) |
| return result; |
| |
| obj = X509_EXTENSION_get_object(ext); |
| |
| if(asn1_object_dump(obj, namebuf, sizeof(namebuf))) |
| /* make sure the name is null-terminated */ |
| namebuf[sizeof(namebuf) - 1] = 0; |
| |
| if(!X509V3_EXT_print(bio_out, ext, 0, 0)) |
| ASN1_STRING_print(bio_out, (ASN1_STRING *)X509_EXTENSION_get_data(ext)); |
| |
| BIO_get_mem_ptr(bio_out, &biomem); |
| result = Curl_ssl_push_certinfo_len(data, certnum, namebuf, biomem->data, |
| biomem->length); |
| BIO_free(bio_out); |
| if(result) |
| break; |
| } |
| return result; |
| } |
| |
| static CURLcode get_pkey_rsa(struct Curl_easy *data, |
| EVP_PKEY *pubkey, BIO *mem, int i) |
| { |
| CURLcode result = CURLE_OK; |
| #ifndef HAVE_EVP_PKEY_GET_PARAMS |
| RSA *rsa = EVP_PKEY_get0_RSA(pubkey); |
| #endif /* !HAVE_EVP_PKEY_GET_PARAMS */ |
| DECLARE_PKEY_PARAM_BIGNUM(n); |
| DECLARE_PKEY_PARAM_BIGNUM(e); |
| #ifdef HAVE_EVP_PKEY_GET_PARAMS |
| EVP_PKEY_get_bn_param(pubkey, OSSL_PKEY_PARAM_RSA_N, &n); |
| EVP_PKEY_get_bn_param(pubkey, OSSL_PKEY_PARAM_RSA_E, &e); |
| #else |
| RSA_get0_key(rsa, &n, &e, NULL); |
| #endif /* HAVE_EVP_PKEY_GET_PARAMS */ |
| BIO_printf(mem, "%d", n ? BN_num_bits(n) : 0); |
| result = push_certinfo(data, mem, "RSA Public Key", i); |
| if(!result) { |
| result = print_pubkey_BN(rsa, n, i); |
| if(!result) |
| result = print_pubkey_BN(rsa, e, i); |
| } |
| FREE_PKEY_PARAM_BIGNUM(n); |
| FREE_PKEY_PARAM_BIGNUM(e); |
| return result; |
| } |
| |
| #ifndef OPENSSL_NO_DSA |
| static CURLcode get_pkey_dsa(struct Curl_easy *data, |
| EVP_PKEY *pubkey, BIO *mem, int i) |
| { |
| CURLcode result = CURLE_OK; |
| #ifndef HAVE_EVP_PKEY_GET_PARAMS |
| DSA *dsa = EVP_PKEY_get0_DSA(pubkey); |
| #endif /* !HAVE_EVP_PKEY_GET_PARAMS */ |
| DECLARE_PKEY_PARAM_BIGNUM(p); |
| DECLARE_PKEY_PARAM_BIGNUM(q); |
| DECLARE_PKEY_PARAM_BIGNUM(g); |
| DECLARE_PKEY_PARAM_BIGNUM(pub_key); |
| #ifdef HAVE_EVP_PKEY_GET_PARAMS |
| EVP_PKEY_get_bn_param(pubkey, OSSL_PKEY_PARAM_FFC_P, &p); |
| EVP_PKEY_get_bn_param(pubkey, OSSL_PKEY_PARAM_FFC_Q, &q); |
| EVP_PKEY_get_bn_param(pubkey, OSSL_PKEY_PARAM_FFC_G, &g); |
| EVP_PKEY_get_bn_param(pubkey, OSSL_PKEY_PARAM_PUB_KEY, &pub_key); |
| #else |
| DSA_get0_pqg(dsa, &p, &q, &g); |
| DSA_get0_key(dsa, &pub_key, NULL); |
| #endif /* HAVE_EVP_PKEY_GET_PARAMS */ |
| result = print_pubkey_BN(dsa, p, i); |
| if(!result) |
| result = print_pubkey_BN(dsa, q, i); |
| if(!result) |
| result = print_pubkey_BN(dsa, g, i); |
| if(!result) |
| result = print_pubkey_BN(dsa, pub_key, i); |
| FREE_PKEY_PARAM_BIGNUM(p); |
| FREE_PKEY_PARAM_BIGNUM(q); |
| FREE_PKEY_PARAM_BIGNUM(g); |
| FREE_PKEY_PARAM_BIGNUM(pub_key); |
| return result; |
| } |
| #endif /* !OPENSSL_NO_DSA */ |
| |
| static CURLcode get_pkey_dh(struct Curl_easy *data, |
| EVP_PKEY *pubkey, BIO *mem, int i) |
| { |
| CURLcode result; |
| #ifndef HAVE_EVP_PKEY_GET_PARAMS |
| DH *dh = EVP_PKEY_get0_DH(pubkey); |
| #endif /* !HAVE_EVP_PKEY_GET_PARAMS */ |
| DECLARE_PKEY_PARAM_BIGNUM(p); |
| DECLARE_PKEY_PARAM_BIGNUM(q); |
| DECLARE_PKEY_PARAM_BIGNUM(g); |
| DECLARE_PKEY_PARAM_BIGNUM(pub_key); |
| #ifdef HAVE_EVP_PKEY_GET_PARAMS |
| EVP_PKEY_get_bn_param(pubkey, OSSL_PKEY_PARAM_FFC_P, &p); |
| EVP_PKEY_get_bn_param(pubkey, OSSL_PKEY_PARAM_FFC_Q, &q); |
| EVP_PKEY_get_bn_param(pubkey, OSSL_PKEY_PARAM_FFC_G, &g); |
| EVP_PKEY_get_bn_param(pubkey, OSSL_PKEY_PARAM_PUB_KEY, &pub_key); |
| #else |
| DH_get0_pqg(dh, &p, &q, &g); |
| DH_get0_key(dh, &pub_key, NULL); |
| #endif /* HAVE_EVP_PKEY_GET_PARAMS */ |
| result = print_pubkey_BN(dh, p, i); |
| if(!result) |
| result = print_pubkey_BN(dh, q, i); |
| if(!result) |
| result = print_pubkey_BN(dh, g, i); |
| if(!result) |
| result = print_pubkey_BN(dh, pub_key, i); |
| FREE_PKEY_PARAM_BIGNUM(p); |
| FREE_PKEY_PARAM_BIGNUM(q); |
| FREE_PKEY_PARAM_BIGNUM(g); |
| FREE_PKEY_PARAM_BIGNUM(pub_key); |
| return result; |
| } |
| |
| static CURLcode ossl_certchain(struct Curl_easy *data, SSL *ssl) |
| { |
| CURLcode result; |
| STACK_OF(X509) *sk; |
| int i; |
| numcert_t numcerts; |
| BIO *mem; |
| |
| DEBUGASSERT(ssl); |
| |
| sk = SSL_get_peer_cert_chain(ssl); |
| if(!sk) |
| return CURLE_SSL_CONNECT_ERROR; |
| |
| numcerts = sk_X509_num(sk); |
| if(numcerts > MAX_ALLOWED_CERT_AMOUNT) { |
| failf(data, "%d certificates is more than allowed (%u)", (int)numcerts, |
| MAX_ALLOWED_CERT_AMOUNT); |
| return CURLE_SSL_CONNECT_ERROR; |
| } |
| |
| result = Curl_ssl_init_certinfo(data, (int)numcerts); |
| if(result) |
| return result; |
| |
| mem = BIO_new(BIO_s_mem()); |
| if(!mem) |
| result = CURLE_OUT_OF_MEMORY; |
| |
| for(i = 0; !result && (i < (int)numcerts); i++) { |
| ASN1_INTEGER *num; |
| const unsigned char *numdata; |
| X509 *x = sk_X509_value(sk, (ossl_valsize_t)i); |
| EVP_PKEY *pubkey = NULL; |
| int j; |
| const ASN1_BIT_STRING *psig = NULL; |
| |
| X509_NAME_print_ex(mem, X509_get_subject_name(x), 0, XN_FLAG_ONELINE); |
| result = push_certinfo(data, mem, "Subject", i); |
| if(result) |
| break; |
| |
| X509_NAME_print_ex(mem, X509_get_issuer_name(x), 0, XN_FLAG_ONELINE); |
| result = push_certinfo(data, mem, "Issuer", i); |
| if(result) |
| break; |
| |
| BIO_printf(mem, "%lx", X509_get_version(x)); |
| result = push_certinfo(data, mem, "Version", i); |
| if(result) |
| break; |
| |
| num = X509_get_serialNumber(x); |
| if(ASN1_STRING_type(num) == V_ASN1_NEG_INTEGER) |
| BIO_puts(mem, "-"); |
| numdata = ASN1_STRING_get0_data(num); |
| for(j = 0; j < ASN1_STRING_length(num); j++) |
| BIO_printf(mem, "%02x", numdata[j]); |
| result = push_certinfo(data, mem, "Serial Number", i); |
| if(result) |
| break; |
| |
| { |
| const X509_ALGOR *sigalg = NULL; |
| X509_PUBKEY *xpubkey = NULL; |
| ASN1_OBJECT *pubkeyoid = NULL; |
| |
| X509_get0_signature(&psig, &sigalg, x); |
| if(sigalg) { |
| const ASN1_OBJECT *sigalgoid = NULL; |
| X509_ALGOR_get0(&sigalgoid, NULL, NULL, sigalg); |
| i2a_ASN1_OBJECT(mem, sigalgoid); |
| result = push_certinfo(data, mem, "Signature Algorithm", i); |
| if(result) |
| break; |
| } |
| |
| xpubkey = X509_get_X509_PUBKEY(x); |
| if(xpubkey) { |
| X509_PUBKEY_get0_param(&pubkeyoid, NULL, NULL, NULL, xpubkey); |
| if(pubkeyoid) { |
| i2a_ASN1_OBJECT(mem, pubkeyoid); |
| result = push_certinfo(data, mem, "Public Key Algorithm", i); |
| if(result) |
| break; |
| } |
| } |
| |
| result = X509V3_ext(data, i, X509_get0_extensions(x)); |
| if(result) |
| break; |
| } |
| |
| ASN1_TIME_print(mem, X509_get0_notBefore(x)); |
| result = push_certinfo(data, mem, "Start date", i); |
| if(result) |
| break; |
| |
| ASN1_TIME_print(mem, X509_get0_notAfter(x)); |
| result = push_certinfo(data, mem, "Expire date", i); |
| if(result) |
| break; |
| |
| pubkey = X509_get_pubkey(x); |
| if(!pubkey) |
| infof(data, " Unable to load public key"); |
| else { |
| switch(EVP_PKEY_id(pubkey)) { |
| case EVP_PKEY_RSA: |
| result = get_pkey_rsa(data, pubkey, mem, i); |
| break; |
| |
| #ifndef OPENSSL_NO_DSA |
| case EVP_PKEY_DSA: |
| result = get_pkey_dsa(data, pubkey, mem, i); |
| break; |
| #endif |
| |
| case EVP_PKEY_DH: |
| result = get_pkey_dh(data, pubkey, mem, i); |
| break; |
| } |
| EVP_PKEY_free(pubkey); |
| } |
| |
| if(!result && psig) { |
| const unsigned char *psigdata = ASN1_STRING_get0_data(psig); |
| for(j = 0; j < ASN1_STRING_length(psig); j++) |
| BIO_printf(mem, "%02x:", psigdata[j]); |
| result = push_certinfo(data, mem, "Signature", i); |
| } |
| |
| if(!result) { |
| PEM_write_bio_X509(mem, x); |
| result = push_certinfo(data, mem, "Cert", i); |
| } |
| } |
| |
| BIO_free(mem); |
| |
| if(result) |
| /* cleanup all leftovers */ |
| Curl_ssl_free_certinfo(data); |
| |
| return result; |
| } |
| |
| #endif /* USE_QUICHE || USE_OPENSSL */ |
| |
| #ifdef USE_OPENSSL |
| |
| static int ossl_bio_cf_create(BIO *bio) |
| { |
| BIO_set_shutdown(bio, 1); |
| BIO_set_init(bio, 1); |
| BIO_set_data(bio, NULL); |
| return 1; |
| } |
| |
| static int ossl_bio_cf_destroy(BIO *bio) |
| { |
| if(!bio) |
| return 0; |
| return 1; |
| } |
| |
| static long ossl_bio_cf_ctrl(BIO *bio, int cmd, long num, void *ptr) |
| { |
| struct Curl_cfilter *cf = BIO_get_data(bio); |
| long ret = 1; |
| |
| (void)cf; |
| (void)ptr; |
| switch(cmd) { |
| case BIO_CTRL_GET_CLOSE: |
| ret = (long)BIO_get_shutdown(bio); |
| break; |
| case BIO_CTRL_SET_CLOSE: |
| BIO_set_shutdown(bio, (int)num); |
| break; |
| case BIO_CTRL_FLUSH: |
| /* we do no delayed writes, but if we ever would, this |
| * needs to trigger it. */ |
| ret = 1; |
| break; |
| case BIO_CTRL_DUP: |
| ret = 1; |
| break; |
| case BIO_CTRL_EOF: { |
| /* EOF has been reached on input? */ |
| struct ssl_connect_data *connssl = cf->ctx; |
| return connssl->peer_closed; |
| } |
| default: |
| ret = 0; |
| break; |
| } |
| return ret; |
| } |
| |
| static int ossl_bio_cf_out_write(BIO *bio, const char *buf, int blen) |
| { |
| struct Curl_cfilter *cf = BIO_get_data(bio); |
| struct ssl_connect_data *connssl = cf->ctx; |
| struct ossl_ctx *octx = (struct ossl_ctx *)connssl->backend; |
| struct Curl_easy *data = CF_DATA_CURRENT(cf); |
| size_t nwritten; |
| CURLcode result; |
| |
| DEBUGASSERT(data); |
| if(blen < 0) |
| return 0; |
| |
| result = Curl_conn_cf_send(cf->next, data, |
| (const uint8_t *)buf, (size_t)blen, FALSE, |
| &nwritten); |
| CURL_TRC_CF(data, cf, "ossl_bio_cf_out_write(len=%d) -> %d, %zu", |
| blen, result, nwritten); |
| BIO_clear_retry_flags(bio); |
| octx->io_result = result; |
| if(result) { |
| if(CURLE_AGAIN == result) |
| BIO_set_retry_write(bio); |
| return -1; |
| } |
| return (int)nwritten; |
| } |
| |
| static int ossl_bio_cf_in_read(BIO *bio, char *buf, int blen) |
| { |
| struct Curl_cfilter *cf = BIO_get_data(bio); |
| struct ssl_connect_data *connssl = cf->ctx; |
| struct ossl_ctx *octx = (struct ossl_ctx *)connssl->backend; |
| struct Curl_easy *data = CF_DATA_CURRENT(cf); |
| size_t nread; |
| CURLcode result, r2; |
| |
| DEBUGASSERT(data); |
| /* OpenSSL catches this case, so should we. */ |
| if(!buf) |
| return 0; |
| if(blen < 0) |
| return 0; |
| |
| result = Curl_conn_cf_recv(cf->next, data, buf, (size_t)blen, &nread); |
| CURL_TRC_CF(data, cf, "ossl_bio_cf_in_read(len=%d) -> %d, %zu", |
| blen, result, nread); |
| BIO_clear_retry_flags(bio); |
| octx->io_result = result; |
| if(result) { |
| if(CURLE_AGAIN == result) |
| BIO_set_retry_read(bio); |
| } |
| else { |
| /* feeding data to OpenSSL means SSL_read() might succeed */ |
| connssl->input_pending = TRUE; |
| if(nread == 0) |
| connssl->peer_closed = TRUE; |
| } |
| |
| /* Before returning server replies to the SSL instance, we need |
| * to have setup the x509 store or verification will fail. */ |
| if(!octx->x509_store_setup) { |
| r2 = Curl_ssl_setup_x509_store(cf, data, octx); |
| if(r2) { |
| BIO_clear_retry_flags(bio); |
| octx->io_result = r2; |
| return -1; |
| } |
| octx->x509_store_setup = TRUE; |
| } |
| return result ? -1 : (int)nread; |
| } |
| |
| static BIO_METHOD *ossl_bio_cf_method_create(void) |
| { |
| BIO_METHOD *m = BIO_meth_new(BIO_TYPE_MEM, "OpenSSL CF BIO"); |
| if(m) { |
| BIO_meth_set_write(m, &ossl_bio_cf_out_write); |
| BIO_meth_set_read(m, &ossl_bio_cf_in_read); |
| BIO_meth_set_ctrl(m, &ossl_bio_cf_ctrl); |
| BIO_meth_set_create(m, &ossl_bio_cf_create); |
| BIO_meth_set_destroy(m, &ossl_bio_cf_destroy); |
| } |
| return m; |
| } |
| |
| static void ossl_bio_cf_method_free(BIO_METHOD *m) |
| { |
| if(m) |
| BIO_meth_free(m); |
| } |
| |
| #ifdef HAVE_KEYLOG_CALLBACK |
| static void ossl_keylog_callback(const SSL *ssl, const char *line) |
| { |
| (void)ssl; |
| |
| Curl_tls_keylog_write_line(line); |
| } |
| #else |
| /* |
| * ossl_log_tls12_secret is called by libcurl to make the CLIENT_RANDOMs if the |
| * OpenSSL being used does not have native support for doing that. |
| */ |
| static void ossl_log_tls12_secret(const SSL *ssl, bool *keylog_done) |
| { |
| const SSL_SESSION *session; |
| unsigned char client_random[SSL3_RANDOM_SIZE]; |
| unsigned char master_key[SSL_MAX_MASTER_KEY_LENGTH]; |
| int master_key_length = 0; |
| |
| ERR_set_mark(); |
| |
| session = SSL_get_session(ssl); |
| |
| if(!session || *keylog_done) { |
| ERR_pop_to_mark(); |
| return; |
| } |
| |
| SSL_get_client_random(ssl, client_random, SSL3_RANDOM_SIZE); |
| master_key_length = (int) |
| SSL_SESSION_get_master_key(session, master_key, SSL_MAX_MASTER_KEY_LENGTH); |
| |
| ERR_pop_to_mark(); |
| |
| /* The handshake has not progressed sufficiently yet, or this is a TLS 1.3 |
| * session (when curl was built with older OpenSSL headers and running with |
| * newer OpenSSL runtime libraries). */ |
| if(master_key_length <= 0) |
| return; |
| |
| *keylog_done = TRUE; |
| Curl_tls_keylog_write("CLIENT_RANDOM", client_random, |
| master_key, master_key_length); |
| } |
| #endif /* !HAVE_KEYLOG_CALLBACK */ |
| |
| static const char *SSL_ERROR_to_str(int err) |
| { |
| switch(err) { |
| case SSL_ERROR_NONE: |
| return "SSL_ERROR_NONE"; |
| case SSL_ERROR_SSL: |
| return "SSL_ERROR_SSL"; |
| case SSL_ERROR_WANT_READ: |
| return "SSL_ERROR_WANT_READ"; |
| case SSL_ERROR_WANT_WRITE: |
| return "SSL_ERROR_WANT_WRITE"; |
| case SSL_ERROR_WANT_X509_LOOKUP: |
| return "SSL_ERROR_WANT_X509_LOOKUP"; |
| case SSL_ERROR_SYSCALL: |
| return "SSL_ERROR_SYSCALL"; |
| case SSL_ERROR_ZERO_RETURN: |
| return "SSL_ERROR_ZERO_RETURN"; |
| case SSL_ERROR_WANT_CONNECT: |
| return "SSL_ERROR_WANT_CONNECT"; |
| case SSL_ERROR_WANT_ACCEPT: |
| return "SSL_ERROR_WANT_ACCEPT"; |
| #ifdef SSL_ERROR_WANT_ASYNC /* OpenSSL 1.1.0+, LibreSSL 3.6.0+ */ |
| case SSL_ERROR_WANT_ASYNC: |
| return "SSL_ERROR_WANT_ASYNC"; |
| #endif |
| #ifdef SSL_ERROR_WANT_ASYNC_JOB /* OpenSSL 1.1.0+, LibreSSL 3.6.0+ */ |
| case SSL_ERROR_WANT_ASYNC_JOB: |
| return "SSL_ERROR_WANT_ASYNC_JOB"; |
| #endif |
| #ifdef SSL_ERROR_WANT_CLIENT_HELLO_CB /* OpenSSL 1.1.1, LibreSSL 3.6.0+ */ |
| case SSL_ERROR_WANT_CLIENT_HELLO_CB: |
| return "SSL_ERROR_WANT_CLIENT_HELLO_CB"; |
| #endif |
| default: |
| return "SSL_ERROR unknown"; |
| } |
| } |
| |
| /* Return error string for last OpenSSL error |
| */ |
| static char *ossl_strerror(unsigned long error, char *buf, size_t size) |
| { |
| size_t len; |
| DEBUGASSERT(size); |
| *buf = '\0'; |
| |
| len = Curl_ossl_version(buf, size); |
| DEBUGASSERT(len < (size - 2)); |
| if(len < (size - 2)) { |
| buf += len; |
| size -= (len + 2); |
| *buf++ = ':'; |
| *buf++ = ' '; |
| *buf = '\0'; |
| } |
| |
| #ifdef HAVE_BORINGSSL_LIKE |
| ERR_error_string_n((uint32_t)error, buf, size); |
| #else |
| ERR_error_string_n(error, buf, size); |
| #endif |
| |
| if(!*buf) { |
| const char *msg = error ? "Unknown error" : "No error"; |
| curlx_strcopy(buf, size, msg, strlen(msg)); |
| } |
| |
| return buf; |
| } |
| |
| static int passwd_callback(char *buf, int num, int encrypting, void *password) |
| { |
| DEBUGASSERT(encrypting == 0); |
| |
| if(!encrypting && num >= 0 && password) { |
| int klen = curlx_uztosi(strlen((char *)password)); |
| if(num > klen) { |
| memcpy(buf, password, klen + 1); |
| return klen; |
| } |
| } |
| return 0; |
| } |
| |
| /* |
| * rand_enough() returns TRUE if we have seeded the random engine properly. |
| */ |
| static bool rand_enough(void) |
| { |
| return RAND_status() != 0; |
| } |
| |
| static CURLcode ossl_seed(struct Curl_easy *data) |
| { |
| /* This might get called before it has been added to a multi handle */ |
| if(data->multi && data->multi->ssl_seeded) |
| return CURLE_OK; |
| |
| if(rand_enough()) { |
| /* OpenSSL 1.1.0+ should return here */ |
| if(data->multi) |
| data->multi->ssl_seeded = TRUE; |
| return CURLE_OK; |
| } |
| failf(data, "Insufficient randomness"); |
| return CURLE_SSL_CONNECT_ERROR; |
| } |
| |
| #ifndef SSL_FILETYPE_ENGINE |
| #define SSL_FILETYPE_ENGINE 42 |
| #endif |
| #ifndef SSL_FILETYPE_PKCS12 |
| #define SSL_FILETYPE_PKCS12 43 |
| #endif |
| #ifndef SSL_FILETYPE_PROVIDER |
| #define SSL_FILETYPE_PROVIDER 44 |
| #endif |
| static int ossl_do_file_type(const char *type) |
| { |
| if(!type || !type[0]) |
| return SSL_FILETYPE_PEM; |
| if(curl_strequal(type, "PEM")) |
| return SSL_FILETYPE_PEM; |
| if(curl_strequal(type, "DER")) |
| return SSL_FILETYPE_ASN1; |
| if(curl_strequal(type, "PROV")) |
| return SSL_FILETYPE_PROVIDER; |
| if(curl_strequal(type, "ENG")) |
| return SSL_FILETYPE_ENGINE; |
| if(curl_strequal(type, "P12")) |
| return SSL_FILETYPE_PKCS12; |
| return -1; |
| } |
| |
| #if defined(USE_OPENSSL_ENGINE) || defined(OPENSSL_HAS_PROVIDERS) |
| /* |
| * Supply default password to the engine user interface conversation. |
| * The password is passed by OpenSSL engine from ENGINE_load_private_key() |
| * last argument to the ui and can be obtained by UI_get0_user_data(ui) here. |
| */ |
| static int ssl_ui_reader(UI *ui, UI_STRING *uis) |
| { |
| const char *password; |
| switch(UI_get_string_type(uis)) { |
| case UIT_PROMPT: |
| case UIT_VERIFY: |
| password = (const char *)UI_get0_user_data(ui); |
| if(password && (UI_get_input_flags(uis) & UI_INPUT_FLAG_DEFAULT_PWD)) { |
| UI_set_result(ui, uis, password); |
| return 1; |
| } |
| FALLTHROUGH(); |
| default: |
| break; |
| } |
| return (UI_method_get_reader(UI_OpenSSL()))(ui, uis); |
| } |
| |
| /* |
| * Suppress interactive request for a default password if available. |
| */ |
| static int ssl_ui_writer(UI *ui, UI_STRING *uis) |
| { |
| switch(UI_get_string_type(uis)) { |
| case UIT_PROMPT: |
| case UIT_VERIFY: |
| if(UI_get0_user_data(ui) && |
| (UI_get_input_flags(uis) & UI_INPUT_FLAG_DEFAULT_PWD)) { |
| return 1; |
| } |
| FALLTHROUGH(); |
| default: |
| break; |
| } |
| return (UI_method_get_writer(UI_OpenSSL()))(ui, uis); |
| } |
| |
| /* |
| * Check if a given string is a PKCS#11 URI |
| */ |
| static bool is_pkcs11_uri(const char *string) |
| { |
| return string && curl_strnequal(string, "pkcs11:", 7); |
| } |
| |
| #endif |
| |
| static CURLcode ossl_set_engine(struct Curl_easy *data, const char *engine); |
| #ifdef OPENSSL_HAS_PROVIDERS |
| static CURLcode ossl_set_provider(struct Curl_easy *data, |
| const char *provider); |
| #endif |
| |
| static int use_certificate_blob(SSL_CTX *ctx, const struct curl_blob *blob, |
| int type, const char *key_passwd) |
| { |
| int ret = 0; |
| X509 *x = NULL; |
| /* the typecast of blob->len is fine since it is guaranteed to never be |
| larger than CURL_MAX_INPUT_LENGTH */ |
| BIO *in = BIO_new_mem_buf(blob->data, (int)(blob->len)); |
| if(!in) |
| return CURLE_OUT_OF_MEMORY; |
| |
| if(type == SSL_FILETYPE_ASN1) { |
| /* j = ERR_R_ASN1_LIB; */ |
| x = d2i_X509_bio(in, NULL); |
| } |
| else if(type == SSL_FILETYPE_PEM) { |
| /* ERR_R_PEM_LIB; */ |
| x = PEM_read_bio_X509(in, NULL, passwd_callback, CURL_UNCONST(key_passwd)); |
| } |
| else { |
| ret = 0; |
| goto end; |
| } |
| |
| if(!x) { |
| ret = 0; |
| goto end; |
| } |
| |
| ret = SSL_CTX_use_certificate(ctx, x); |
| end: |
| X509_free(x); |
| BIO_free(in); |
| return ret; |
| } |
| |
| static int use_privatekey_blob(SSL_CTX *ctx, const struct curl_blob *blob, |
| int type, const char *key_passwd) |
| { |
| int ret = 0; |
| EVP_PKEY *pkey = NULL; |
| BIO *in = BIO_new_mem_buf(blob->data, (int)(blob->len)); |
| if(!in) |
| return CURLE_OUT_OF_MEMORY; |
| |
| if(type == SSL_FILETYPE_PEM) |
| pkey = PEM_read_bio_PrivateKey(in, NULL, passwd_callback, |
| CURL_UNCONST(key_passwd)); |
| else if(type == SSL_FILETYPE_ASN1) |
| pkey = d2i_PrivateKey_bio(in, NULL); |
| else |
| goto end; |
| |
| if(!pkey) |
| goto end; |
| |
| ret = SSL_CTX_use_PrivateKey(ctx, pkey); |
| EVP_PKEY_free(pkey); |
| end: |
| BIO_free(in); |
| return ret; |
| } |
| |
| static int use_certificate_chain_blob(SSL_CTX *ctx, |
| const struct curl_blob *blob, |
| const char *key_passwd) |
| { |
| int ret = 0; |
| X509 *x = NULL; |
| BIO *in = BIO_new_mem_buf(blob->data, (int)(blob->len)); |
| if(!in) |
| return CURLE_OUT_OF_MEMORY; |
| |
| ERR_clear_error(); |
| |
| x = PEM_read_bio_X509_AUX(in, NULL, |
| passwd_callback, CURL_UNCONST(key_passwd)); |
| if(!x) |
| goto end; |
| |
| ret = SSL_CTX_use_certificate(ctx, x); |
| |
| if(ERR_peek_error() != 0) |
| ret = 0; |
| |
| if(ret) { |
| X509 *ca; |
| sslerr_t err; |
| |
| if(!SSL_CTX_clear_chain_certs(ctx)) { |
| ret = 0; |
| goto end; |
| } |
| |
| while((ca = PEM_read_bio_X509(in, NULL, passwd_callback, |
| CURL_UNCONST(key_passwd))) != NULL) { |
| |
| if(!SSL_CTX_add0_chain_cert(ctx, ca)) { |
| X509_free(ca); |
| ret = 0; |
| goto end; |
| } |
| } |
| |
| err = ERR_peek_last_error(); |
| if((ERR_GET_LIB(err) == ERR_LIB_PEM) && |
| (ERR_GET_REASON(err) == PEM_R_NO_START_LINE)) |
| ERR_clear_error(); |
| else |
| ret = 0; |
| } |
| |
| end: |
| X509_free(x); |
| BIO_free(in); |
| return ret; |
| } |
| |
| static int enginecheck(struct Curl_easy *data, |
| SSL_CTX* ctx, |
| const char *key_file, |
| const char *key_passwd) |
| #ifdef USE_OPENSSL_ENGINE |
| { |
| EVP_PKEY *priv_key = NULL; |
| |
| /* Implicitly use pkcs11 engine if none was provided and the |
| * key_file is a PKCS#11 URI */ |
| if(!data->state.engine) { |
| if(is_pkcs11_uri(key_file)) { |
| if(ossl_set_engine(data, "pkcs11") != CURLE_OK) { |
| return 0; |
| } |
| } |
| } |
| |
| if(data->state.engine) { |
| UI_METHOD *ui_method = UI_create_method("curl user interface"); |
| if(!ui_method) { |
| failf(data, "unable to create " OSSL_PACKAGE " user-interface method"); |
| return 0; |
| } |
| UI_method_set_opener(ui_method, UI_method_get_opener(UI_OpenSSL())); |
| UI_method_set_closer(ui_method, UI_method_get_closer(UI_OpenSSL())); |
| UI_method_set_reader(ui_method, ssl_ui_reader); |
| UI_method_set_writer(ui_method, ssl_ui_writer); |
| priv_key = ENGINE_load_private_key(data->state.engine, key_file, |
| ui_method, |
| CURL_UNCONST(key_passwd)); |
| UI_destroy_method(ui_method); |
| if(!priv_key) { |
| failf(data, "failed to load private key from crypto engine"); |
| return 0; |
| } |
| if(SSL_CTX_use_PrivateKey(ctx, priv_key) != 1) { |
| failf(data, "unable to set private key"); |
| EVP_PKEY_free(priv_key); |
| return 0; |
| } |
| EVP_PKEY_free(priv_key); /* we do not need the handle any more... */ |
| } |
| else { |
| failf(data, "crypto engine not set, cannot load private key"); |
| return 0; |
| } |
| return 1; |
| } |
| #else |
| { |
| (void)ctx; |
| (void)key_file; |
| (void)key_passwd; |
| failf(data, "SSL_FILETYPE_ENGINE not supported for private key"); |
| return 0; |
| } |
| #endif |
| |
| static int providercheck(struct Curl_easy *data, |
| SSL_CTX* ctx, |
| const char *key_file) |
| #ifdef OPENSSL_HAS_PROVIDERS |
| { |
| char error_buffer[256]; |
| /* Implicitly use pkcs11 provider if none was provided and the |
| * key_file is a PKCS#11 URI */ |
| if(!data->state.provider_loaded) { |
| if(is_pkcs11_uri(key_file)) { |
| if(ossl_set_provider(data, "pkcs11") != CURLE_OK) { |
| return 0; |
| } |
| } |
| } |
| |
| if(data->state.provider_loaded) { |
| /* Load the private key from the provider */ |
| EVP_PKEY *priv_key = NULL; |
| OSSL_STORE_CTX *store = NULL; |
| OSSL_STORE_INFO *info = NULL; |
| UI_METHOD *ui_method = UI_create_method("curl user interface"); |
| if(!ui_method) { |
| failf(data, "unable to create " OSSL_PACKAGE " user-interface method"); |
| return 0; |
| } |
| UI_method_set_opener(ui_method, UI_method_get_opener(UI_OpenSSL())); |
| UI_method_set_closer(ui_method, UI_method_get_closer(UI_OpenSSL())); |
| UI_method_set_reader(ui_method, ssl_ui_reader); |
| UI_method_set_writer(ui_method, ssl_ui_writer); |
| |
| store = OSSL_STORE_open_ex(key_file, data->state.libctx, |
| data->state.propq, ui_method, NULL, NULL, |
| NULL, NULL); |
| if(!store) { |
| failf(data, "Failed to open OpenSSL store: %s", |
| ossl_strerror(ERR_get_error(), error_buffer, |
| sizeof(error_buffer))); |
| UI_destroy_method(ui_method); |
| return 0; |
| } |
| if(OSSL_STORE_expect(store, OSSL_STORE_INFO_PKEY) != 1) { |
| failf(data, "Failed to set store preference. Ignoring the error: %s", |
| ossl_strerror(ERR_get_error(), error_buffer, |
| sizeof(error_buffer))); |
| } |
| |
| info = OSSL_STORE_load(store); |
| if(info) { |
| int ossl_type = OSSL_STORE_INFO_get_type(info); |
| |
| if(ossl_type == OSSL_STORE_INFO_PKEY) |
| priv_key = OSSL_STORE_INFO_get1_PKEY(info); |
| OSSL_STORE_INFO_free(info); |
| } |
| OSSL_STORE_close(store); |
| UI_destroy_method(ui_method); |
| if(!priv_key) { |
| failf(data, "No private key found in the openssl store: %s", |
| ossl_strerror(ERR_get_error(), error_buffer, |
| sizeof(error_buffer))); |
| return 0; |
| } |
| |
| if(SSL_CTX_use_PrivateKey(ctx, priv_key) != 1) { |
| failf(data, "unable to set private key [%s]", |
| ossl_strerror(ERR_get_error(), error_buffer, |
| sizeof(error_buffer))); |
| EVP_PKEY_free(priv_key); |
| return 0; |
| } |
| EVP_PKEY_free(priv_key); /* we do not need the handle any more... */ |
| } |
| else { |
| failf(data, "crypto provider not set, cannot load private key"); |
| return 0; |
| } |
| return 1; |
| } |
| #else |
| { |
| (void)ctx; |
| (void)key_file; |
| failf(data, "SSL_FILETYPE_PROVIDER not supported for private key"); |
| return 0; |
| } |
| #endif |
| |
| static int engineload(struct Curl_easy *data, |
| SSL_CTX* ctx, |
| const char *cert_file) |
| /* ENGINE_CTRL_GET_CMD_FROM_NAME supported by OpenSSL, LibreSSL <=3.8.3 */ |
| #if defined(USE_OPENSSL_ENGINE) && defined(ENGINE_CTRL_GET_CMD_FROM_NAME) |
| { |
| char error_buffer[256]; |
| /* Implicitly use pkcs11 engine if none was provided and the |
| * cert_file is a PKCS#11 URI */ |
| if(!data->state.engine) { |
| if(is_pkcs11_uri(cert_file)) { |
| if(ossl_set_engine(data, "pkcs11") != CURLE_OK) { |
| return 0; |
| } |
| } |
| } |
| |
| if(data->state.engine) { |
| const char *cmd_name = "LOAD_CERT_CTRL"; |
| struct { |
| const char *cert_id; |
| X509 *cert; |
| } params; |
| |
| params.cert_id = cert_file; |
| params.cert = NULL; |
| |
| /* Does the engine supports LOAD_CERT_CTRL ? */ |
| if(!ENGINE_ctrl(data->state.engine, ENGINE_CTRL_GET_CMD_FROM_NAME, |
| 0, CURL_UNCONST(cmd_name), NULL)) { |
| failf(data, "ssl engine does not support loading certificates"); |
| return 0; |
| } |
| |
| /* Load the certificate from the engine */ |
| if(!ENGINE_ctrl_cmd(data->state.engine, cmd_name, |
| 0, ¶ms, NULL, 1)) { |
| failf(data, "ssl engine cannot load client cert with id '%s' [%s]", |
| cert_file, |
| ossl_strerror(ERR_get_error(), error_buffer, |
| sizeof(error_buffer))); |
| return 0; |
| } |
| |
| if(!params.cert) { |
| failf(data, "ssl engine did not initialized the certificate properly."); |
| return 0; |
| } |
| |
| if(SSL_CTX_use_certificate(ctx, params.cert) != 1) { |
| failf(data, "unable to set client certificate [%s]", |
| ossl_strerror(ERR_get_error(), error_buffer, |
| sizeof(error_buffer))); |
| X509_free(params.cert); |
| return 0; |
| } |
| X509_free(params.cert); /* we do not need the handle any more... */ |
| } |
| else { |
| failf(data, "crypto engine not set, cannot load certificate"); |
| return 0; |
| } |
| return 1; |
| } |
| #else |
| { |
| (void)ctx; |
| (void)cert_file; |
| failf(data, "SSL_FILETYPE_ENGINE not supported for certificate"); |
| return 0; |
| } |
| #endif |
| |
| static int providerload(struct Curl_easy *data, |
| SSL_CTX* ctx, |
| const char *cert_file) |
| #ifdef OPENSSL_HAS_PROVIDERS |
| { |
| char error_buffer[256]; |
| /* Implicitly use pkcs11 provider if none was provided and the |
| * cert_file is a PKCS#11 URI */ |
| if(!data->state.provider_loaded) { |
| if(is_pkcs11_uri(cert_file)) { |
| if(ossl_set_provider(data, "pkcs11") != CURLE_OK) { |
| return 0; |
| } |
| } |
| } |
| |
| if(data->state.provider_loaded) { |
| /* Load the certificate from the provider */ |
| OSSL_STORE_INFO *info = NULL; |
| X509 *cert = NULL; |
| OSSL_STORE_CTX *store = |
| OSSL_STORE_open_ex(cert_file, data->state.libctx, |
| NULL, NULL, NULL, NULL, NULL, NULL); |
| int rc; |
| |
| if(!store) { |
| failf(data, "Failed to open OpenSSL store: %s", |
| ossl_strerror(ERR_get_error(), error_buffer, |
| sizeof(error_buffer))); |
| return 0; |
| } |
| if(OSSL_STORE_expect(store, OSSL_STORE_INFO_CERT) != 1) { |
| failf(data, "Failed to set store preference. Ignoring the error: %s", |
| ossl_strerror(ERR_get_error(), error_buffer, |
| sizeof(error_buffer))); |
| } |
| |
| info = OSSL_STORE_load(store); |
| if(info) { |
| int ossl_type = OSSL_STORE_INFO_get_type(info); |
| |
| if(ossl_type == OSSL_STORE_INFO_CERT) |
| cert = OSSL_STORE_INFO_get1_CERT(info); |
| OSSL_STORE_INFO_free(info); |
| } |
| OSSL_STORE_close(store); |
| if(!cert) { |
| failf(data, "No cert found in the openssl store: %s", |
| ossl_strerror(ERR_get_error(), error_buffer, |
| sizeof(error_buffer))); |
| return 0; |
| } |
| |
| rc = SSL_CTX_use_certificate(ctx, cert); |
| X509_free(cert); /* we do not need the handle any more... */ |
| |
| if(rc != 1) { |
| failf(data, "unable to set client certificate [%s]", |
| ossl_strerror(ERR_get_error(), error_buffer, |
| sizeof(error_buffer))); |
| return 0; |
| } |
| } |
| else { |
| failf(data, "crypto provider not set, cannot load certificate"); |
| return 0; |
| } |
| return 1; |
| } |
| #else |
| { |
| (void)ctx; |
| (void)cert_file; |
| failf(data, "SSL_FILETYPE_PROVIDER not supported for certificate"); |
| return 0; |
| } |
| #endif |
| |
| static int pkcs12load(struct Curl_easy *data, |
| SSL_CTX* ctx, |
| const struct curl_blob *cert_blob, |
| const char *cert_file, |
| const char *key_passwd) |
| { |
| char error_buffer[256]; |
| BIO *cert_bio = NULL; |
| PKCS12 *p12 = NULL; |
| EVP_PKEY *pri; |
| X509 *x509; |
| int cert_done = 0; |
| STACK_OF(X509) *ca = NULL; |
| if(cert_blob) { |
| cert_bio = BIO_new_mem_buf(cert_blob->data, (int)(cert_blob->len)); |
| if(!cert_bio) { |
| failf(data, "BIO_new_mem_buf NULL, " OSSL_PACKAGE " error %s", |
| ossl_strerror(ERR_get_error(), error_buffer, |
| sizeof(error_buffer)) ); |
| return 0; |
| } |
| } |
| else { |
| cert_bio = BIO_new(BIO_s_file()); |
| if(!cert_bio) { |
| failf(data, "BIO_new return NULL, " OSSL_PACKAGE " error %s", |
| ossl_strerror(ERR_get_error(), error_buffer, |
| sizeof(error_buffer)) ); |
| return 0; |
| } |
| |
| if(BIO_read_filename(cert_bio, CURL_UNCONST(cert_file)) <= 0) { |
| failf(data, "could not open PKCS12 file '%s'", cert_file); |
| BIO_free(cert_bio); |
| return 0; |
| } |
| } |
| |
| p12 = d2i_PKCS12_bio(cert_bio, NULL); |
| BIO_free(cert_bio); |
| |
| if(!p12) { |
| failf(data, "error reading PKCS12 file '%s'", |
| cert_blob ? "(memory blob)" : cert_file); |
| return 0; |
| } |
| |
| if(!PKCS12_parse(p12, key_passwd, &pri, &x509, &ca)) { |
| failf(data, "could not parse PKCS12 file, check password, " OSSL_PACKAGE |
| " error %s", |
| ossl_strerror(ERR_get_error(), error_buffer, sizeof(error_buffer))); |
| PKCS12_free(p12); |
| return 0; |
| } |
| |
| PKCS12_free(p12); |
| |
| if(SSL_CTX_use_certificate(ctx, x509) != 1) { |
| failf(data, "could not load PKCS12 client certificate, " OSSL_PACKAGE |
| " error %s", |
| ossl_strerror(ERR_get_error(), error_buffer, sizeof(error_buffer))); |
| goto fail; |
| } |
| |
| if(SSL_CTX_use_PrivateKey(ctx, pri) != 1) { |
| failf(data, "unable to use private key from PKCS12 file '%s'", cert_file); |
| goto fail; |
| } |
| |
| if(!SSL_CTX_check_private_key(ctx)) { |
| failf(data, "private key from PKCS12 file '%s' " |
| "does not match certificate in same file", cert_file); |
| goto fail; |
| } |
| /* Set Certificate Verification chain */ |
| if(ca) { |
| while(sk_X509_num(ca)) { |
| /* |
| * Note that sk_X509_pop() is used below to make sure the cert is |
| * removed from the stack properly before getting passed to |
| * SSL_CTX_add_extra_chain_cert(), which takes ownership. Previously |
| * we used sk_X509_value() instead, but then we would clean it in the |
| * subsequent sk_X509_pop_free() call. |
| */ |
| X509 *x = sk_X509_pop(ca); |
| if(!SSL_CTX_add_client_CA(ctx, x)) { |
| X509_free(x); |
| failf(data, "cannot add certificate to client CA list"); |
| goto fail; |
| } |
| if(!SSL_CTX_add_extra_chain_cert(ctx, x)) { |
| X509_free(x); |
| failf(data, "cannot add certificate to certificate chain"); |
| goto fail; |
| } |
| } |
| } |
| |
| cert_done = 1; |
| fail: |
| EVP_PKEY_free(pri); |
| X509_free(x509); |
| #if defined(__clang__) && __clang_major__ >= 16 |
| #pragma clang diagnostic push |
| #pragma clang diagnostic ignored "-Wcast-function-type-strict" |
| #endif |
| sk_X509_pop_free(ca, X509_free); |
| #if defined(__clang__) && __clang_major__ >= 16 |
| #pragma clang diagnostic pop |
| #endif |
| if(!cert_done) |
| return 0; /* failure! */ |
| return 1; |
| } |
| |
| static CURLcode client_cert(struct Curl_easy *data, |
| SSL_CTX* ctx, |
| char *cert_file, |
| const struct curl_blob *cert_blob, |
| const char *cert_type, |
| char *key_file, |
| const struct curl_blob *key_blob, |
| const char *key_type, |
| char *key_passwd) |
| { |
| char error_buffer[256]; |
| bool check_privkey = TRUE; |
| int file_type = ossl_do_file_type(cert_type); |
| |
| if(cert_file || cert_blob || (file_type == SSL_FILETYPE_ENGINE) || |
| (file_type == SSL_FILETYPE_PROVIDER)) { |
| SSL *ssl; |
| X509 *x509; |
| bool pcks12_done = FALSE; |
| int cert_use_result; |
| |
| if(key_passwd) { |
| /* set the password in the callback userdata */ |
| SSL_CTX_set_default_passwd_cb_userdata(ctx, key_passwd); |
| /* Set passwd callback: */ |
| SSL_CTX_set_default_passwd_cb(ctx, passwd_callback); |
| } |
| |
| switch(file_type) { |
| case SSL_FILETYPE_PEM: |
| /* SSL_CTX_use_certificate_chain_file() only works on PEM files */ |
| cert_use_result = cert_blob ? |
| use_certificate_chain_blob(ctx, cert_blob, key_passwd) : |
| SSL_CTX_use_certificate_chain_file(ctx, cert_file); |
| if(cert_use_result != 1) { |
| failf(data, |
| "could not load PEM client certificate from %s, " OSSL_PACKAGE |
| " error %s, " |
| "(no key found, wrong passphrase, or wrong file format?)", |
| (cert_blob ? "CURLOPT_SSLCERT_BLOB" : cert_file), |
| ossl_strerror(ERR_get_error(), error_buffer, |
| sizeof(error_buffer))); |
| return CURLE_SSL_CERTPROBLEM; |
| } |
| break; |
| |
| case SSL_FILETYPE_ASN1: |
| /* SSL_CTX_use_certificate_file() works with either PEM or ASN1, but |
| we use the case above for PEM so this can only be performed with |
| ASN1 files. */ |
| |
| cert_use_result = cert_blob ? |
| use_certificate_blob(ctx, cert_blob, file_type, key_passwd) : |
| SSL_CTX_use_certificate_file(ctx, cert_file, file_type); |
| if(cert_use_result != 1) { |
| failf(data, |
| "could not load ASN1 client certificate from %s, " OSSL_PACKAGE |
| " error %s, " |
| "(no key found, wrong passphrase, or wrong file format?)", |
| (cert_blob ? "CURLOPT_SSLCERT_BLOB" : cert_file), |
| ossl_strerror(ERR_get_error(), error_buffer, |
| sizeof(error_buffer))); |
| return CURLE_SSL_CERTPROBLEM; |
| } |
| break; |
| |
| case SSL_FILETYPE_ENGINE: |
| if(!cert_file || !engineload(data, ctx, cert_file)) |
| return CURLE_SSL_CERTPROBLEM; |
| break; |
| |
| case SSL_FILETYPE_PROVIDER: |
| if(!cert_file || !providerload(data, ctx, cert_file)) |
| return CURLE_SSL_CERTPROBLEM; |
| break; |
| |
| case SSL_FILETYPE_PKCS12: |
| if(!pkcs12load(data, ctx, cert_blob, cert_file, key_passwd)) |
| return CURLE_SSL_CERTPROBLEM; |
| pcks12_done = TRUE; |
| break; |
| |
| default: |
| failf(data, "not supported file type '%s' for certificate", cert_type); |
| return CURLE_BAD_FUNCTION_ARGUMENT; |
| } |
| |
| if((!key_file) && (!key_blob)) { |
| key_file = cert_file; |
| key_blob = cert_blob; |
| } |
| else |
| file_type = ossl_do_file_type(key_type); |
| |
| switch(file_type) { |
| case SSL_FILETYPE_PEM: |
| case SSL_FILETYPE_ASN1: |
| cert_use_result = key_blob ? |
| use_privatekey_blob(ctx, key_blob, file_type, key_passwd) : |
| SSL_CTX_use_PrivateKey_file(ctx, key_file, file_type); |
| if(cert_use_result != 1) { |
| failf(data, "unable to set private key file: '%s' type %s", |
| key_file ? key_file : "(memory blob)", |
| key_type ? key_type : "PEM"); |
| return CURLE_BAD_FUNCTION_ARGUMENT; |
| } |
| break; |
| case SSL_FILETYPE_ENGINE: |
| if(!enginecheck(data, ctx, key_file, key_passwd)) |
| return CURLE_SSL_CERTPROBLEM; |
| break; |
| |
| case SSL_FILETYPE_PROVIDER: |
| if(!providercheck(data, ctx, key_file)) |
| return CURLE_SSL_CERTPROBLEM; |
| break; |
| |
| case SSL_FILETYPE_PKCS12: |
| if(!pcks12_done) { |
| failf(data, "file type P12 for private key not supported"); |
| return CURLE_SSL_CERTPROBLEM; |
| } |
| break; |
| default: |
| failf(data, "not supported file type for private key"); |
| return CURLE_BAD_FUNCTION_ARGUMENT; |
| } |
| |
| ssl = SSL_new(ctx); |
| if(!ssl) { |
| failf(data, "unable to create an SSL structure"); |
| return CURLE_OUT_OF_MEMORY; |
| } |
| |
| x509 = SSL_get_certificate(ssl); |
| |
| if(x509) { |
| EVP_PKEY *pktmp = X509_get_pubkey(x509); |
| EVP_PKEY_copy_parameters(pktmp, SSL_get_privatekey(ssl)); |
| EVP_PKEY_free(pktmp); |
| } |
| |
| #if !defined(OPENSSL_NO_RSA) && !defined(OPENSSL_NO_DEPRECATED_3_0) |
| { |
| /* If RSA is used, do not check the private key if its flags indicate |
| * it does not support it. */ |
| EVP_PKEY *priv_key = SSL_get_privatekey(ssl); |
| if(EVP_PKEY_id(priv_key) == EVP_PKEY_RSA) { |
| RSA *rsa = EVP_PKEY_get1_RSA(priv_key); |
| if(RSA_flags(rsa) & RSA_METHOD_FLAG_NO_CHECK) |
| check_privkey = FALSE; |
| RSA_free(rsa); /* Decrement reference count */ |
| } |
| } |
| #endif |
| |
| SSL_free(ssl); |
| |
| /* If we are using DSA, we can copy the parameters from |
| * the private key */ |
| |
| if(check_privkey == TRUE) { |
| /* Now we know that a key and cert have been set against |
| * the SSL context */ |
| if(!SSL_CTX_check_private_key(ctx)) { |
| failf(data, "Private key does not match the certificate public key"); |
| return CURLE_SSL_CERTPROBLEM; |
| } |
| } |
| } |
| return CURLE_OK; |
| } |
| |
| #ifndef CURL_DISABLE_VERBOSE_STRINGS |
| /* returns non-zero on failure */ |
| static CURLcode x509_name_oneline(X509_NAME *a, struct dynbuf *d) |
| { |
| BIO *bio_out = BIO_new(BIO_s_mem()); |
| BUF_MEM *biomem; |
| int rc; |
| CURLcode result = CURLE_OUT_OF_MEMORY; |
| |
| if(bio_out) { |
| unsigned long flags = XN_FLAG_SEP_SPLUS_SPC | |
| (XN_FLAG_ONELINE & ~ASN1_STRFLGS_ESC_MSB & ~XN_FLAG_SPC_EQ); |
| curlx_dyn_reset(d); |
| rc = X509_NAME_print_ex(bio_out, a, 0, flags); |
| if(rc != -1) { |
| BIO_get_mem_ptr(bio_out, &biomem); |
| result = curlx_dyn_addn(d, biomem->data, biomem->length); |
| } |
| BIO_free(bio_out); |
| } |
| return result; |
| } |
| #endif |
| |
| /** |
| * Global SSL init |
| * |
| * @retval 0 error initializing SSL |
| * @retval 1 SSL initialized successfully |
| */ |
| static int ossl_init(void) |
| { |
| const uint64_t flags = |
| #ifdef OPENSSL_INIT_ENGINE_ALL_BUILTIN |
| /* not present in BoringSSL */ |
| OPENSSL_INIT_ENGINE_ALL_BUILTIN | |
| #endif |
| #ifdef CURL_DISABLE_OPENSSL_AUTO_LOAD_CONFIG |
| OPENSSL_INIT_NO_LOAD_CONFIG | |
| #else |
| OPENSSL_INIT_LOAD_CONFIG | |
| #endif |
| 0; |
| OPENSSL_init_ssl(flags, NULL); |
| |
| Curl_tls_keylog_open(); |
| |
| return 1; |
| } |
| |
| /* Global cleanup */ |
| static void ossl_cleanup(void) |
| { |
| Curl_tls_keylog_close(); |
| } |
| |
| /* Selects an OpenSSL crypto engine or provider. |
| */ |
| static CURLcode ossl_set_engine(struct Curl_easy *data, const char *name) |
| { |
| #ifdef USE_OPENSSL_ENGINE |
| CURLcode result = CURLE_SSL_ENGINE_NOTFOUND; |
| ENGINE *e = ENGINE_by_id(name); |
| |
| if(e) { |
| |
| if(data->state.engine) { |
| ENGINE_finish(data->state.engine); |
| ENGINE_free(data->state.engine); |
| data->state.engine = NULL; |
| } |
| if(!ENGINE_init(e)) { |
| char buf[256]; |
| |
| ENGINE_free(e); |
| failf(data, "Failed to initialise SSL Engine '%s': %s", |
| name, ossl_strerror(ERR_get_error(), buf, sizeof(buf))); |
| result = CURLE_SSL_ENGINE_INITFAILED; |
| e = NULL; |
| } |
| else { |
| result = CURLE_OK; |
| } |
| data->state.engine = e; |
| return result; |
| } |
| #endif |
| #ifdef OPENSSL_HAS_PROVIDERS |
| return ossl_set_provider(data, name); |
| #else |
| (void)name; |
| failf(data, "OpenSSL engine not found"); |
| return CURLE_SSL_ENGINE_NOTFOUND; |
| #endif |
| } |
| |
| /* Sets engine as default for all SSL operations |
| */ |
| static CURLcode ossl_set_engine_default(struct Curl_easy *data) |
| { |
| #ifdef USE_OPENSSL_ENGINE |
| if(data->state.engine) { |
| if(ENGINE_set_default(data->state.engine, ENGINE_METHOD_ALL) > 0) { |
| infof(data, "set default crypto engine '%s'", |
| ENGINE_get_id(data->state.engine)); |
| } |
| else { |
| failf(data, "set default crypto engine '%s' failed", |
| ENGINE_get_id(data->state.engine)); |
| return CURLE_SSL_ENGINE_SETFAILED; |
| } |
| } |
| #else |
| (void)data; |
| #endif |
| return CURLE_OK; |
| } |
| |
| /* Return list of OpenSSL crypto engine names. |
| */ |
| static struct curl_slist *ossl_engines_list(struct Curl_easy *data) |
| { |
| struct curl_slist *list = NULL; |
| #ifdef USE_OPENSSL_ENGINE |
| struct curl_slist *beg; |
| ENGINE *e; |
| |
| for(e = ENGINE_get_first(); e; e = ENGINE_get_next(e)) { |
| beg = curl_slist_append(list, ENGINE_get_id(e)); |
| if(!beg) { |
| curl_slist_free_all(list); |
| return NULL; |
| } |
| list = beg; |
| } |
| #endif |
| (void)data; |
| return list; |
| } |
| |
| #ifdef OPENSSL_HAS_PROVIDERS |
| |
| static void ossl_provider_cleanup(struct Curl_easy *data) |
| { |
| if(data->state.baseprov) { |
| OSSL_PROVIDER_unload(data->state.baseprov); |
| data->state.baseprov = NULL; |
| } |
| if(data->state.provider) { |
| OSSL_PROVIDER_unload(data->state.provider); |
| data->state.provider = NULL; |
| } |
| OSSL_LIB_CTX_free(data->state.libctx); |
| data->state.libctx = NULL; |
| Curl_safefree(data->state.propq); |
| data->state.provider_loaded = FALSE; |
| } |
| |
| #define MAX_PROVIDER_LEN 128 /* reasonable */ |
| |
| /* Selects an OpenSSL crypto provider. |
| * |
| * A provider might need an associated property, a string passed on to |
| * OpenSSL. Specify this as [PROVIDER][:PROPERTY]: separate the name and the |
| * property with a colon. No colon means no property is set. |
| * |
| * An example provider + property looks like "tpm2:?provider=tpm2". |
| */ |
| static CURLcode ossl_set_provider(struct Curl_easy *data, const char *iname) |
| { |
| char name[MAX_PROVIDER_LEN + 1]; |
| struct Curl_str prov; |
| const char *propq = NULL; |
| |
| if(!iname) { |
| /* clear and cleanup provider use */ |
| ossl_provider_cleanup(data); |
| return CURLE_OK; |
| } |
| if(curlx_str_until(&iname, &prov, MAX_PROVIDER_LEN, ':')) |
| return CURLE_BAD_FUNCTION_ARGUMENT; |
| |
| if(!curlx_str_single(&iname, ':')) |
| /* there was a colon, get the propq until the end of string */ |
| propq = iname; |
| |
| /* we need the name in a buffer, null-terminated */ |
| memcpy(name, curlx_str(&prov), curlx_strlen(&prov)); |
| name[curlx_strlen(&prov)] = 0; |
| |
| if(!data->state.libctx) { |
| OSSL_LIB_CTX *libctx = OSSL_LIB_CTX_new(); |
| if(!libctx) |
| return CURLE_OUT_OF_MEMORY; |
| if(propq) { |
| data->state.propq = curlx_strdup(propq); |
| if(!data->state.propq) { |
| OSSL_LIB_CTX_free(libctx); |
| return CURLE_OUT_OF_MEMORY; |
| } |
| } |
| data->state.libctx = libctx; |
| } |
| |
| #ifndef CURL_DISABLE_OPENSSL_AUTO_LOAD_CONFIG |
| /* load the configuration file into the library context before checking the |
| * provider availability */ |
| if(!OSSL_LIB_CTX_load_config(data->state.libctx, NULL)) { |
| infof(data, "Failed to load default openssl config. Proceeding."); |
| } |
| #endif |
| |
| if(OSSL_PROVIDER_available(data->state.libctx, name)) { |
| /* already loaded through the configuration - no action needed */ |
| data->state.provider_loaded = TRUE; |
| return CURLE_OK; |
| } |
| |
| data->state.provider = OSSL_PROVIDER_try_load(data->state.libctx, name, 1); |
| if(!data->state.provider) { |
| char error_buffer[256]; |
| failf(data, "Failed to initialize provider: %s", |
| ossl_strerror(ERR_get_error(), error_buffer, sizeof(error_buffer))); |
| ossl_provider_cleanup(data); |
| return CURLE_SSL_ENGINE_NOTFOUND; |
| } |
| |
| /* load the base provider as well */ |
| data->state.baseprov = OSSL_PROVIDER_try_load(data->state.libctx, "base", 1); |
| if(!data->state.baseprov) { |
| ossl_provider_cleanup(data); |
| failf(data, "Failed to load base"); |
| return CURLE_SSL_ENGINE_NOTFOUND; |
| } |
| else |
| data->state.provider_loaded = TRUE; |
| return CURLE_OK; |
| } |
| #endif |
| |
| static CURLcode ossl_shutdown(struct Curl_cfilter *cf, |
| struct Curl_easy *data, |
| bool send_shutdown, bool *done) |
| { |
| struct ssl_connect_data *connssl = cf->ctx; |
| struct ossl_ctx *octx = (struct ossl_ctx *)connssl->backend; |
| CURLcode result = CURLE_OK; |
| char buf[1024]; |
| int nread = -1, err; |
| unsigned long sslerr; |
| size_t i; |
| |
| DEBUGASSERT(octx); |
| if(!octx->ssl || cf->shutdown) { |
| *done = TRUE; |
| goto out; |
| } |
| |
| connssl->io_need = CURL_SSL_IO_NEED_NONE; |
| *done = FALSE; |
| if(!(SSL_get_shutdown(octx->ssl) & SSL_SENT_SHUTDOWN)) { |
| /* We have not started the shutdown from our side yet. Check |
| * if the server already sent us one. */ |
| ERR_clear_error(); |
| for(i = 0; i < 10; ++i) { |
| nread = SSL_read(octx->ssl, buf, (int)sizeof(buf)); |
| CURL_TRC_CF(data, cf, "SSL shutdown not sent, read -> %d", nread); |
| if(nread <= 0) |
| break; |
| } |
| err = SSL_get_error(octx->ssl, nread); |
| if(!nread && err == SSL_ERROR_ZERO_RETURN) { |
| bool input_pending; |
| /* Yes, it did. */ |
| if(!send_shutdown) { |
| CURL_TRC_CF(data, cf, "SSL shutdown received, not sending"); |
| *done = TRUE; |
| goto out; |
| } |
| else if(!cf->next->cft->is_alive(cf->next, data, &input_pending)) { |
| /* Server closed the connection after its closy notify. It |
| * seems not interested to see our close notify, so do not |
| * send it. We are done. */ |
| connssl->peer_closed = TRUE; |
| CURL_TRC_CF(data, cf, "peer closed connection"); |
| *done = TRUE; |
| goto out; |
| } |
| } |
| } |
| |
| /* SSL should now have started the shutdown from our side. Since it |
| * was not complete, we are lacking the close notify from the server. */ |
| if(send_shutdown && !(SSL_get_shutdown(octx->ssl) & SSL_SENT_SHUTDOWN)) { |
| int rc; |
| ERR_clear_error(); |
| CURL_TRC_CF(data, cf, "send SSL close notify"); |
| rc = SSL_shutdown(octx->ssl); |
| if(rc == 1) { |
| CURL_TRC_CF(data, cf, "SSL shutdown finished"); |
| *done = TRUE; |
| goto out; |
| } |
| if(SSL_ERROR_WANT_WRITE == SSL_get_error(octx->ssl, rc)) { |
| CURL_TRC_CF(data, cf, "SSL shutdown still wants to send"); |
| connssl->io_need = CURL_SSL_IO_NEED_SEND; |
| goto out; |
| } |
| /* Having sent the close notify, we use SSL_read() to get the |
| * missing close notify from the server. */ |
| } |
| |
| for(i = 0; i < 10; ++i) { |
| ERR_clear_error(); |
| nread = SSL_read(octx->ssl, buf, (int)sizeof(buf)); |
| CURL_TRC_CF(data, cf, "SSL shutdown read -> %d", nread); |
| if(nread <= 0) |
| break; |
| } |
| err = SSL_get_error(octx->ssl, nread); |
| switch(err) { |
| case SSL_ERROR_ZERO_RETURN: /* no more data */ |
| if(SSL_shutdown(octx->ssl) == 1) |
| CURL_TRC_CF(data, cf, "SSL shutdown finished"); |
| else |
| CURL_TRC_CF(data, cf, "SSL shutdown not received, but closed"); |
| *done = TRUE; |
| break; |
| case SSL_ERROR_NONE: /* just did not get anything */ |
| case SSL_ERROR_WANT_READ: |
| /* SSL has send its notify and now wants to read the reply |
| * from the server. We are not really interested in that. */ |
| CURL_TRC_CF(data, cf, "SSL shutdown sent, want receive"); |
| connssl->io_need = CURL_SSL_IO_NEED_RECV; |
| break; |
| case SSL_ERROR_WANT_WRITE: |
| CURL_TRC_CF(data, cf, "SSL shutdown send blocked"); |
| connssl->io_need = CURL_SSL_IO_NEED_SEND; |
| break; |
| default: |
| /* Server seems to have closed the connection without sending us |
| * a close notify. */ |
| sslerr = ERR_get_error(); |
| CURL_TRC_CF(data, cf, "SSL shutdown, ignore recv error: '%s', errno %d", |
| (sslerr ? |
| ossl_strerror(sslerr, buf, sizeof(buf)) : |
| SSL_ERROR_to_str(err)), |
| SOCKERRNO); |
| *done = TRUE; |
| result = CURLE_OK; |
| break; |
| } |
| |
| out: |
| cf->shutdown = (result || *done); |
| if(cf->shutdown || (connssl->io_need != CURL_SSL_IO_NEED_NONE)) |
| connssl->input_pending = FALSE; |
| return result; |
| } |
| |
| static void ossl_close(struct Curl_cfilter *cf, struct Curl_easy *data) |
| { |
| struct ssl_connect_data *connssl = cf->ctx; |
| struct ossl_ctx *octx = (struct ossl_ctx *)connssl->backend; |
| |
| (void)data; |
| DEBUGASSERT(octx); |
| |
| connssl->input_pending = FALSE; |
| if(octx->ssl) { |
| SSL_free(octx->ssl); |
| octx->ssl = NULL; |
| } |
| if(octx->ssl_ctx) { |
| SSL_CTX_free(octx->ssl_ctx); |
| octx->ssl_ctx = NULL; |
| octx->x509_store_setup = FALSE; |
| } |
| if(octx->bio_method) { |
| ossl_bio_cf_method_free(octx->bio_method); |
| octx->bio_method = NULL; |
| } |
| } |
| |
| /* |
| * This function is called when the 'data' struct is going away. Close |
| * down everything and free all resources! |
| */ |
| static void ossl_close_all(struct Curl_easy *data) |
| { |
| #ifdef USE_OPENSSL_ENGINE |
| if(data->state.engine) { |
| ENGINE_finish(data->state.engine); |
| ENGINE_free(data->state.engine); |
| data->state.engine = NULL; |
| } |
| #else |
| (void)data; |
| #endif |
| #ifdef OPENSSL_HAS_PROVIDERS |
| ossl_provider_cleanup(data); |
| #endif |
| } |
| |
| /* ====================================================== */ |
| |
| /* Quote from RFC2818 section 3.1 "Server Identity" |
| |
| If a subjectAltName extension of type dNSName is present, that MUST |
| be used as the identity. Otherwise, the (most specific) Common Name |
| field in the Subject field of the certificate MUST be used. Although |
| the use of the Common Name is existing practice, it is deprecated and |
| Certification Authorities are encouraged to use the dNSName instead. |
| |
| Matching is performed using the matching rules specified by |
| [RFC2459]. If more than one identity of a given type is present in |
| the certificate (e.g., more than one dNSName name, a match in any one |
| of the set is considered acceptable.) Names may contain the wildcard |
| character * which is considered to match any single domain name |
| component or component fragment. E.g., *.a.com matches foo.a.com but |
| not bar.foo.a.com. f*.com matches foo.com but not bar.com. |
| |
| In some cases, the URI is specified as an IP address rather than a |
| hostname. In this case, the iPAddress subjectAltName must be present |
| in the certificate and must exactly match the IP in the URI. |
| |
| This function is now used from ngtcp2 (QUIC) as well. |
| */ |
| static CURLcode ossl_verifyhost(struct Curl_easy *data, |
| struct connectdata *conn, |
| struct ssl_peer *peer, |
| X509 *server_cert) |
| { |
| bool matched = FALSE; |
| int target; /* target type, GEN_DNS or GEN_IPADD */ |
| size_t addrlen = 0; |
| STACK_OF(GENERAL_NAME) *altnames; |
| #ifdef USE_IPV6 |
| struct in6_addr addr; |
| #else |
| struct in_addr addr; |
| #endif |
| CURLcode result = CURLE_OK; |
| bool dNSName = FALSE; /* if a dNSName field exists in the cert */ |
| bool iPAddress = FALSE; /* if an iPAddress field exists in the cert */ |
| size_t hostlen = strlen(peer->hostname); |
| |
| (void)conn; |
| switch(peer->type) { |
| case CURL_SSL_PEER_IPV4: |
| if(!curlx_inet_pton(AF_INET, peer->hostname, &addr)) |
| return CURLE_PEER_FAILED_VERIFICATION; |
| target = GEN_IPADD; |
| addrlen = sizeof(struct in_addr); |
| break; |
| #ifdef USE_IPV6 |
| case CURL_SSL_PEER_IPV6: |
| if(!curlx_inet_pton(AF_INET6, peer->hostname, &addr)) |
| return CURLE_PEER_FAILED_VERIFICATION; |
| target = GEN_IPADD; |
| addrlen = sizeof(struct in6_addr); |
| break; |
| #endif |
| case CURL_SSL_PEER_DNS: |
| target = GEN_DNS; |
| break; |
| default: |
| DEBUGASSERT(0); |
| failf(data, "unexpected ssl peer type: %d", peer->type); |
| return CURLE_PEER_FAILED_VERIFICATION; |
| } |
| |
| /* get a "list" of alternative names */ |
| altnames = X509_get_ext_d2i(server_cert, NID_subject_alt_name, NULL, NULL); |
| |
| if(altnames) { |
| #ifdef HAVE_BORINGSSL_LIKE |
| size_t numalts; |
| size_t i; |
| #else |
| int numalts; |
| int i; |
| #endif |
| |
| /* get amount of alternatives, RFC2459 claims there MUST be at least |
| one, but we do not depend on it... */ |
| numalts = sk_GENERAL_NAME_num(altnames); |
| |
| /* loop through all alternatives - until a dnsmatch */ |
| for(i = 0; (i < numalts) && !matched; i++) { |
| /* get a handle to alternative name number i */ |
| const GENERAL_NAME *check = sk_GENERAL_NAME_value(altnames, i); |
| |
| if(check->type == GEN_DNS) |
| dNSName = TRUE; |
| else if(check->type == GEN_IPADD) |
| iPAddress = TRUE; |
| |
| /* only check alternatives of the same type the target is */ |
| if(check->type == target) { |
| /* get data and length */ |
| const char *altptr = (const char *)ASN1_STRING_get0_data(check->d.ia5); |
| size_t altlen = (size_t)ASN1_STRING_length(check->d.ia5); |
| |
| switch(target) { |
| case GEN_DNS: /* name/pattern comparison */ |
| /* The OpenSSL man page explicitly says: "In general it cannot be |
| assumed that the data returned by ASN1_STRING_data() is null |
| terminated or does not contain embedded nulls." But also that |
| "The actual format of the data will depend on the actual string |
| type itself: for example for an IA5String the data will be ASCII" |
| |
| It has been however verified that in 0.9.6 and 0.9.7, IA5String |
| is always null-terminated. |
| */ |
| if((altlen == strlen(altptr)) && |
| /* if this is not true, there was an embedded zero in the name |
| string and we cannot match it. */ |
| Curl_cert_hostcheck(altptr, altlen, peer->hostname, hostlen)) { |
| matched = TRUE; |
| infof(data, " subjectAltName: \"%s\" matches cert's \"%.*s\"", |
| peer->dispname, (int)altlen, altptr); |
| } |
| break; |
| |
| case GEN_IPADD: /* IP address comparison */ |
| /* compare alternative IP address if the data chunk is the same size |
| our server IP address is */ |
| if((altlen == addrlen) && !memcmp(altptr, &addr, altlen)) { |
| matched = TRUE; |
| infof(data, " subjectAltName: \"%s\" matches cert's IP address!", |
| peer->dispname); |
| } |
| break; |
| } |
| } |
| } |
| GENERAL_NAMES_free(altnames); |
| } |
| |
| if(matched) |
| /* an alternative name matched */ |
| ; |
| else if(dNSName || iPAddress) { |
| const char *tname = (peer->type == CURL_SSL_PEER_DNS) ? "hostname" : |
| (peer->type == CURL_SSL_PEER_IPV4) ? |
| "ipv4 address" : "ipv6 address"; |
| infof(data, " subjectAltName does not match %s %s", tname, peer->dispname); |
| failf(data, "SSL: no alternative certificate subject name matches " |
| "target %s '%s'", tname, peer->dispname); |
| result = CURLE_PEER_FAILED_VERIFICATION; |
| } |
| else { |
| /* we have to look to the last occurrence of a commonName in the |
| distinguished one to get the most significant one. */ |
| int i = -1; |
| unsigned char *cn = NULL; |
| int cnlen = 0; |
| bool free_cn = FALSE; |
| |
| /* The following is done because of a bug in 0.9.6b */ |
| X509_NAME *name = X509_get_subject_name(server_cert); |
| if(name) { |
| int j; |
| while((j = X509_NAME_get_index_by_NID(name, NID_commonName, i)) >= 0) |
| i = j; |
| } |
| |
| /* we have the name entry and we will now convert this to a string |
| that we can use for comparison. Doing this we support BMPstring, |
| UTF8, etc. */ |
| |
| if(i >= 0) { |
| ASN1_STRING *tmp = |
| X509_NAME_ENTRY_get_data(X509_NAME_get_entry(name, i)); |
| |
| /* In OpenSSL 0.9.7d and earlier, ASN1_STRING_to_UTF8 fails if the input |
| is already UTF-8 encoded. We check for this case and copy the raw |
| string manually to avoid the problem. This code can be made |
| conditional in the future when OpenSSL has been fixed. */ |
| if(tmp) { |
| if(ASN1_STRING_type(tmp) == V_ASN1_UTF8STRING) { |
| cnlen = ASN1_STRING_length(tmp); |
| cn = (unsigned char *)CURL_UNCONST(ASN1_STRING_get0_data(tmp)); |
| } |
| else { /* not a UTF8 name */ |
| cnlen = ASN1_STRING_to_UTF8(&cn, tmp); |
| free_cn = TRUE; |
| } |
| |
| if((cnlen <= 0) || !cn) |
| result = CURLE_OUT_OF_MEMORY; |
| else if((size_t)cnlen != strlen((char *)cn)) { |
| /* there was a terminating zero before the end of string, this |
| cannot match and we return failure! */ |
| failf(data, "SSL: illegal cert name field"); |
| result = CURLE_PEER_FAILED_VERIFICATION; |
| } |
| } |
| } |
| |
| if(result) |
| /* error already detected, pass through */ |
| ; |
| else if(!cn) { |
| failf(data, "SSL: unable to obtain common name from peer certificate"); |
| result = CURLE_PEER_FAILED_VERIFICATION; |
| } |
| else if(!Curl_cert_hostcheck((const char *)cn, cnlen, |
| peer->hostname, hostlen)) { |
| failf(data, "SSL: certificate subject name '%s' does not match " |
| "target hostname '%s'", cn, peer->dispname); |
| result = CURLE_PEER_FAILED_VERIFICATION; |
| } |
| else { |
| infof(data, " common name: %s (matched)", cn); |
| } |
| if(free_cn) |
| OPENSSL_free(cn); |
| } |
| |
| return result; |
| } |
| |
| #ifndef OPENSSL_NO_OCSP |
| static CURLcode verifystatus(struct Curl_cfilter *cf, |
| struct Curl_easy *data, |
| struct ossl_ctx *octx) |
| { |
| int i, ocsp_status; |
| #ifdef HAVE_BORINGSSL_LIKE |
| const uint8_t *status; |
| #else |
| unsigned char *status; |
| #endif |
| const unsigned char *p; |
| CURLcode result = CURLE_OK; |
| OCSP_RESPONSE *rsp = NULL; |
| OCSP_BASICRESP *br = NULL; |
| X509_STORE *st = NULL; |
| STACK_OF(X509) *ch = NULL; |
| X509 *cert; |
| OCSP_CERTID *id = NULL; |
| int cert_status, crl_reason; |
| ASN1_GENERALIZEDTIME *rev, *thisupd, *nextupd; |
| int ret; |
| long len; |
| |
| (void)cf; |
| DEBUGASSERT(octx); |
| |
| len = (long)SSL_get_tlsext_status_ocsp_resp(octx->ssl, &status); |
| |
| if(!status) { |
| failf(data, "No OCSP response received"); |
| result = CURLE_SSL_INVALIDCERTSTATUS; |
| goto end; |
| } |
| p = status; |
| rsp = d2i_OCSP_RESPONSE(NULL, &p, len); |
| if(!rsp) { |
| failf(data, "Invalid OCSP response"); |
| result = CURLE_SSL_INVALIDCERTSTATUS; |
| goto end; |
| } |
| |
| ocsp_status = OCSP_response_status(rsp); |
| if(ocsp_status != OCSP_RESPONSE_STATUS_SUCCESSFUL) { |
| failf(data, "Invalid OCSP response status: %s (%d)", |
| OCSP_response_status_str(ocsp_status), ocsp_status); |
| result = CURLE_SSL_INVALIDCERTSTATUS; |
| goto end; |
| } |
| |
| br = OCSP_response_get1_basic(rsp); |
| if(!br) { |
| failf(data, "Invalid OCSP response"); |
| result = CURLE_SSL_INVALIDCERTSTATUS; |
| goto end; |
| } |
| |
| ch = SSL_get_peer_cert_chain(octx->ssl); |
| if(!ch) { |
| failf(data, "Could not get peer certificate chain"); |
| result = CURLE_SSL_INVALIDCERTSTATUS; |
| goto end; |
| } |
| st = SSL_CTX_get_cert_store(octx->ssl_ctx); |
| |
| if(OCSP_basic_verify(br, ch, st, 0) <= 0) { |
| failf(data, "OCSP response verification failed"); |
| result = CURLE_SSL_INVALIDCERTSTATUS; |
| goto end; |
| } |
| |
| /* Compute the certificate's ID */ |
| cert = SSL_get1_peer_certificate(octx->ssl); |
| if(!cert) { |
| failf(data, "Error getting peer certificate"); |
| result = CURLE_SSL_INVALIDCERTSTATUS; |
| goto end; |
| } |
| |
| for(i = 0; i < (int)sk_X509_num(ch); i++) { |
| X509 *issuer = sk_X509_value(ch, (ossl_valsize_t)i); |
| if(X509_check_issued(issuer, cert) == X509_V_OK) { |
| /* Note to analysis tools: using SHA1 here is fine. The `id` |
| * generated is used as a hash lookup key, not as a verifier |
| * of the OCSP data itself. This all according to RFC 5019. */ |
| id = OCSP_cert_to_id(EVP_sha1(), cert, issuer); |
| break; |
| } |
| } |
| X509_free(cert); |
| |
| if(!id) { |
| failf(data, "Error computing OCSP ID"); |
| result = CURLE_SSL_INVALIDCERTSTATUS; |
| goto end; |
| } |
| |
| /* Find the single OCSP response corresponding to the certificate ID */ |
| ret = OCSP_resp_find_status(br, id, &cert_status, &crl_reason, &rev, |
| &thisupd, &nextupd); |
| OCSP_CERTID_free(id); |
| if(ret != 1) { |
| failf(data, "Could not find certificate ID in OCSP response"); |
| result = CURLE_SSL_INVALIDCERTSTATUS; |
| goto end; |
| } |
| |
| /* Validate the OCSP response issuing and update times. |
| * - `thisupd` is the time the OCSP response was issued |
| * - `nextupd` is the time the OCSP response should be updated |
| * (valid life time assigned by the OCSP responder) |
| * - 3rd param: how many seconds of clock skew we allow between |
| * our clock and the instance that issued the OCSP response |
| * - 4th param: how many seconds in the past `thisupd` may be, with |
| * -1 meaning there is no limit. */ |
| if(!OCSP_check_validity(thisupd, nextupd, 300L, -1L)) { |
| failf(data, "OCSP response has expired"); |
| result = CURLE_SSL_INVALIDCERTSTATUS; |
| goto end; |
| } |
| |
| infof(data, "SSL certificate status: %s (%d)", |
| OCSP_cert_status_str(cert_status), cert_status); |
| |
| switch(cert_status) { |
| case V_OCSP_CERTSTATUS_GOOD: |
| break; |
| |
| case V_OCSP_CERTSTATUS_REVOKED: |
| result = CURLE_SSL_INVALIDCERTSTATUS; |
| failf(data, "SSL certificate revocation reason: %s (%d)", |
| OCSP_crl_reason_str(crl_reason), crl_reason); |
| goto end; |
| |
| case V_OCSP_CERTSTATUS_UNKNOWN: |
| default: |
| result = CURLE_SSL_INVALIDCERTSTATUS; |
| goto end; |
| } |
| |
| end: |
| if(br) |
| OCSP_BASICRESP_free(br); |
| OCSP_RESPONSE_free(rsp); |
| |
| return result; |
| } |
| #endif |
| |
| static const char *ssl_msg_type(int ssl_ver, int msg) |
| { |
| #ifdef SSL2_VERSION_MAJOR /* OpenSSL 1.0.2, LibreSSL <=3.9.2 */ |
| if(ssl_ver == SSL2_VERSION_MAJOR) { |
| switch(msg) { |
| case SSL2_MT_ERROR: |
| return "Error"; |
| case SSL2_MT_CLIENT_HELLO: |
| return "Client hello"; |
| case SSL2_MT_CLIENT_MASTER_KEY: |
| return "Client key"; |
| case SSL2_MT_CLIENT_FINISHED: |
| return "Client finished"; |
| case SSL2_MT_SERVER_HELLO: |
| return "Server hello"; |
| case SSL2_MT_SERVER_VERIFY: |
| return "Server verify"; |
| case SSL2_MT_SERVER_FINISHED: |
| return "Server finished"; |
| case SSL2_MT_REQUEST_CERTIFICATE: |
| return "Request CERT"; |
| case SSL2_MT_CLIENT_CERTIFICATE: |
| return "Client CERT"; |
| } |
| } |
| else |
| #endif |
| if(ssl_ver == SSL3_VERSION_MAJOR) { |
| switch(msg) { |
| case SSL3_MT_HELLO_REQUEST: |
| return "Hello request"; |
| case SSL3_MT_CLIENT_HELLO: |
| return "Client hello"; |
| case SSL3_MT_SERVER_HELLO: |
| return "Server hello"; |
| #ifdef SSL3_MT_NEWSESSION_TICKET |
| case SSL3_MT_NEWSESSION_TICKET: |
| return "Newsession Ticket"; |
| #endif |
| case SSL3_MT_CERTIFICATE: |
| return "Certificate"; |
| case SSL3_MT_SERVER_KEY_EXCHANGE: |
| return "Server key exchange"; |
| case SSL3_MT_CLIENT_KEY_EXCHANGE: |
| return "Client key exchange"; |
| case SSL3_MT_CERTIFICATE_REQUEST: |
| return "Request CERT"; |
| case SSL3_MT_SERVER_DONE: |
| return "Server finished"; |
| case SSL3_MT_CERTIFICATE_VERIFY: |
| return "CERT verify"; |
| case SSL3_MT_FINISHED: |
| return "Finished"; |
| #ifdef SSL3_MT_CERTIFICATE_STATUS |
| case SSL3_MT_CERTIFICATE_STATUS: |
| return "Certificate Status"; |
| #endif |
| #ifdef SSL3_MT_ENCRYPTED_EXTENSIONS |
| case SSL3_MT_ENCRYPTED_EXTENSIONS: |
| return "Encrypted Extensions"; |
| #endif |
| #ifdef SSL3_MT_SUPPLEMENTAL_DATA |
| case SSL3_MT_SUPPLEMENTAL_DATA: |
| return "Supplemental data"; |
| #endif |
| #ifdef SSL3_MT_END_OF_EARLY_DATA |
| case SSL3_MT_END_OF_EARLY_DATA: |
| return "End of early data"; |
| #endif |
| #ifdef SSL3_MT_KEY_UPDATE |
| case SSL3_MT_KEY_UPDATE: |
| return "Key update"; |
| #endif |
| #ifdef SSL3_MT_NEXT_PROTO |
| case SSL3_MT_NEXT_PROTO: |
| return "Next protocol"; |
| #endif |
| #ifdef SSL3_MT_MESSAGE_HASH |
| case SSL3_MT_MESSAGE_HASH: |
| return "Message hash"; |
| #endif |
| } |
| } |
| return "Unknown"; |
| } |
| |
| static const char *tls_rt_type(int type) |
| { |
| switch(type) { |
| #ifdef SSL3_RT_HEADER |
| case SSL3_RT_HEADER: |
| return "TLS header"; |
| #endif |
| case SSL3_RT_CHANGE_CIPHER_SPEC: |
| return "TLS change cipher"; |
| case SSL3_RT_ALERT: |
| return "TLS alert"; |
| case SSL3_RT_HANDSHAKE: |
| return "TLS handshake"; |
| case SSL3_RT_APPLICATION_DATA: |
| return "TLS app data"; |
| default: |
| return "TLS Unknown"; |
| } |
| } |
| |
| /* |
| * Our callback from the SSL/TLS layers. |
| */ |
| static void ossl_trace(int direction, int ssl_ver, int content_type, |
| const void *buf, size_t len, SSL *ssl, |
| void *userp) |
| { |
| const char *verstr; |
| struct Curl_cfilter *cf = userp; |
| struct Curl_easy *data = NULL; |
| char unknown[32]; |
| |
| if(!cf) |
| return; |
| data = CF_DATA_CURRENT(cf); |
| if(!data || !data->set.fdebug || (direction && direction != 1)) |
| return; |
| |
| switch(ssl_ver) { |
| #ifdef SSL2_VERSION /* removed in recent versions */ |
| case SSL2_VERSION: |
| verstr = "SSLv2"; |
| break; |
| #endif |
| #ifdef SSL3_VERSION |
| case SSL3_VERSION: |
| verstr = "SSLv3"; |
| break; |
| #endif |
| case TLS1_VERSION: |
| verstr = "TLSv1.0"; |
| break; |
| #ifdef TLS1_1_VERSION |
| case TLS1_1_VERSION: |
| verstr = "TLSv1.1"; |
| break; |
| #endif |
| #ifdef TLS1_2_VERSION |
| case TLS1_2_VERSION: |
| verstr = "TLSv1.2"; |
| break; |
| #endif |
| case TLS1_3_VERSION: |
| verstr = "TLSv1.3"; |
| break; |
| default: |
| curl_msnprintf(unknown, sizeof(unknown), "(%x)", ssl_ver); |
| verstr = unknown; |
| break; |
| } |
| |
| /* Log progress for interesting records only (like Handshake or Alert), skip |
| * all raw record headers (content_type == SSL3_RT_HEADER or ssl_ver == 0). |
| * For TLS 1.3, skip notification of the decrypted inner Content-Type. |
| */ |
| if(ssl_ver |
| #ifdef SSL3_RT_HEADER |
| && content_type != SSL3_RT_HEADER |
| #endif |
| #ifdef SSL3_RT_INNER_CONTENT_TYPE |
| && content_type != SSL3_RT_INNER_CONTENT_TYPE |
| #endif |
| ) { |
| const char *msg_name, *tls_rt_name; |
| char ssl_buf[1024]; |
| int msg_type, txt_len; |
| |
| /* the info given when the version is zero is not that useful for us */ |
| |
| ssl_ver >>= 8; /* check the upper 8 bits only below */ |
| |
| /* SSLv2 does not seem to have TLS record-type headers, so OpenSSL |
| * always pass-up content-type as 0. But the interesting message-type |
| * is at 'buf[0]'. |
| */ |
| if(ssl_ver == SSL3_VERSION_MAJOR && content_type) |
| tls_rt_name = tls_rt_type(content_type); |
| else |
| tls_rt_name = ""; |
| |
| if(content_type == SSL3_RT_CHANGE_CIPHER_SPEC) { |
| msg_type = *(const char *)buf; |
| msg_name = "Change cipher spec"; |
| } |
| else if(content_type == SSL3_RT_ALERT) { |
| msg_type = (((const char *)buf)[0] << 8) + ((const char *)buf)[1]; |
| msg_name = SSL_alert_desc_string_long(msg_type); |
| } |
| else { |
| msg_type = *(const char *)buf; |
| msg_name = ssl_msg_type(ssl_ver, msg_type); |
| } |
| |
| txt_len = curl_msnprintf(ssl_buf, sizeof(ssl_buf), |
| "%s (%s), %s, %s (%d):\n", |
| verstr, direction ? "OUT" : "IN", |
| tls_rt_name, msg_name, msg_type); |
| Curl_debug(data, CURLINFO_TEXT, ssl_buf, (size_t)txt_len); |
| } |
| |
| Curl_debug(data, (direction == 1) ? CURLINFO_SSL_DATA_OUT : |
| CURLINFO_SSL_DATA_IN, (const char *)buf, len); |
| (void)ssl; |
| } |
| |
| static CURLcode |
| ossl_set_ssl_version_min_max(struct Curl_cfilter *cf, SSL_CTX *ctx, |
| unsigned int ssl_version_min) |
| { |
| struct ssl_primary_config *conn_config = Curl_ssl_cf_get_primary_config(cf); |
| /* first, TLS min version... */ |
| long curl_ssl_version_min = (long)ssl_version_min; |
| long curl_ssl_version_max; |
| |
| /* convert curl min SSL version option to OpenSSL constant */ |
| #if defined(HAVE_BORINGSSL_LIKE) || defined(LIBRESSL_VERSION_NUMBER) |
| uint16_t ossl_ssl_version_min = 0; |
| uint16_t ossl_ssl_version_max = 0; |
| #else |
| long ossl_ssl_version_min = 0; |
| long ossl_ssl_version_max = 0; |
| #endif |
| /* it cannot be default here */ |
| DEBUGASSERT(curl_ssl_version_min != CURL_SSLVERSION_DEFAULT); |
| switch(curl_ssl_version_min) { |
| case CURL_SSLVERSION_TLSv1: /* TLS 1.x */ |
| case CURL_SSLVERSION_TLSv1_0: |
| ossl_ssl_version_min = TLS1_VERSION; |
| break; |
| case CURL_SSLVERSION_TLSv1_1: |
| ossl_ssl_version_min = TLS1_1_VERSION; |
| break; |
| case CURL_SSLVERSION_TLSv1_2: |
| ossl_ssl_version_min = TLS1_2_VERSION; |
| break; |
| case CURL_SSLVERSION_TLSv1_3: |
| ossl_ssl_version_min = TLS1_3_VERSION; |
| break; |
| } |
| |
| /* ... then, TLS max version */ |
| curl_ssl_version_max = (long)conn_config->version_max; |
| |
| /* convert curl max SSL version option to OpenSSL constant */ |
| switch(curl_ssl_version_max) { |
| case CURL_SSLVERSION_MAX_TLSv1_0: |
| ossl_ssl_version_max = TLS1_VERSION; |
| break; |
| case CURL_SSLVERSION_MAX_TLSv1_1: |
| ossl_ssl_version_max = TLS1_1_VERSION; |
| break; |
| case CURL_SSLVERSION_MAX_TLSv1_2: |
| ossl_ssl_version_max = TLS1_2_VERSION; |
| break; |
| case CURL_SSLVERSION_MAX_TLSv1_3: |
| ossl_ssl_version_max = TLS1_3_VERSION; |
| break; |
| case CURL_SSLVERSION_MAX_NONE: /* none selected */ |
| case CURL_SSLVERSION_MAX_DEFAULT: /* max selected */ |
| default: |
| /* SSL_CTX_set_max_proto_version states that: setting the maximum to 0 |
| will enable protocol versions up to the highest version supported by |
| the library */ |
| ossl_ssl_version_max = 0; |
| break; |
| } |
| |
| if(!SSL_CTX_set_min_proto_version(ctx, ossl_ssl_version_min) || |
| !SSL_CTX_set_max_proto_version(ctx, ossl_ssl_version_max)) |
| return CURLE_SSL_CONNECT_ERROR; |
| |
| return CURLE_OK; |
| } |
| |
| #ifdef HAVE_BORINGSSL_LIKE |
| typedef uint32_t ctx_option_t; |
| #elif defined(HAVE_OPENSSL3) |
| typedef uint64_t ctx_option_t; |
| #elif defined(LIBRESSL_VERSION_NUMBER) |
| typedef long ctx_option_t; |
| #else |
| typedef unsigned long ctx_option_t; |
| #endif |
| |
| CURLcode Curl_ossl_add_session(struct Curl_cfilter *cf, |
| struct Curl_easy *data, |
| const char *ssl_peer_key, |
| SSL_SESSION *session, |
| int ietf_tls_id, |
| const char *alpn, |
| unsigned char *quic_tp, |
| size_t quic_tp_len) |
| { |
| unsigned char *der_session_buf = NULL; |
| unsigned char *qtp_clone = NULL; |
| CURLcode result = CURLE_OK; |
| |
| if(!cf || !data) |
| goto out; |
| |
| if(Curl_ssl_scache_use(cf, data)) { |
| struct Curl_ssl_session *sc_session = NULL; |
| size_t der_session_size; |
| unsigned char *der_session_ptr; |
| size_t earlydata_max = 0; |
| |
| der_session_size = i2d_SSL_SESSION(session, NULL); |
| if(der_session_size == 0) { |
| result = CURLE_OUT_OF_MEMORY; |
| goto out; |
| } |
| |
| der_session_buf = der_session_ptr = curlx_malloc(der_session_size); |
| if(!der_session_buf) { |
| result = CURLE_OUT_OF_MEMORY; |
| goto out; |
| } |
| |
| der_session_size = i2d_SSL_SESSION(session, &der_session_ptr); |
| if(der_session_size == 0) { |
| result = CURLE_OUT_OF_MEMORY; |
| goto out; |
| } |
| |
| #ifdef HAVE_OPENSSL_EARLYDATA |
| earlydata_max = SSL_SESSION_get_max_early_data(session); |
| #endif |
| if(quic_tp && quic_tp_len) { |
| qtp_clone = Curl_memdup0((char *)quic_tp, quic_tp_len); |
| if(!qtp_clone) { |
| result = CURLE_OUT_OF_MEMORY; |
| goto out; |
| } |
| } |
| |
| result = Curl_ssl_session_create2(der_session_buf, der_session_size, |
| ietf_tls_id, alpn, |
| (curl_off_t)time(NULL) + |
| SSL_SESSION_get_timeout(session), |
| earlydata_max, qtp_clone, quic_tp_len, |
| &sc_session); |
| der_session_buf = NULL; /* took ownership of sdata */ |
| if(!result) { |
| result = Curl_ssl_scache_put(cf, data, ssl_peer_key, sc_session); |
| /* took ownership of `sc_session` */ |
| } |
| } |
| |
| out: |
| curlx_free(der_session_buf); |
| return result; |
| } |
| |
| /* The "new session" callback must return zero if the session can be removed |
| * or non-zero if the session has been put into the session cache. |
| */ |
| static int ossl_new_session_cb(SSL *ssl, SSL_SESSION *ssl_sessionid) |
| { |
| struct Curl_cfilter *cf = (struct Curl_cfilter *)SSL_get_app_data(ssl); |
| if(cf) { |
| struct Curl_easy *data = CF_DATA_CURRENT(cf); |
| struct ssl_connect_data *connssl = cf->ctx; |
| Curl_ossl_add_session(cf, data, connssl->peer.scache_key, ssl_sessionid, |
| SSL_version(ssl), connssl->negotiated.alpn, |
| NULL, 0); |
| } |
| return 0; |
| } |
| |
| static CURLcode load_cacert_from_memory(X509_STORE *store, |
| const struct curl_blob *ca_info_blob) |
| { |
| /* these need to be freed at the end */ |
| BIO *cbio = NULL; |
| STACK_OF(X509_INFO) *inf = NULL; |
| |
| /* everything else is just a reference */ |
| int i, count = 0; |
| X509_INFO *itmp = NULL; |
| |
| if(ca_info_blob->len > (size_t)INT_MAX) |
| return CURLE_SSL_CACERT_BADFILE; |
| |
| cbio = BIO_new_mem_buf(ca_info_blob->data, (int)ca_info_blob->len); |
| if(!cbio) |
| return CURLE_OUT_OF_MEMORY; |
| |
| inf = PEM_X509_INFO_read_bio(cbio, NULL, NULL, NULL); |
| if(!inf) { |
| BIO_free(cbio); |
| return CURLE_SSL_CACERT_BADFILE; |
| } |
| |
| /* add each entry from PEM file to x509_store */ |
| for(i = 0; i < (int)sk_X509_INFO_num(inf); ++i) { |
| itmp = sk_X509_INFO_value(inf, (ossl_valsize_t)i); |
| if(itmp->x509) { |
| if(X509_STORE_add_cert(store, itmp->x509)) { |
| ++count; |
| } |
| else { |
| /* set count to 0 to return an error */ |
| count = 0; |
| break; |
| } |
| } |
| if(itmp->crl) { |
| if(X509_STORE_add_crl(store, itmp->crl)) { |
| ++count; |
| } |
| else { |
| /* set count to 0 to return an error */ |
| count = 0; |
| break; |
| } |
| } |
| } |
| |
| #if defined(__clang__) && __clang_major__ >= 16 |
| #pragma clang diagnostic push |
| #pragma clang diagnostic ignored "-Wcast-function-type-strict" |
| #endif |
| sk_X509_INFO_pop_free(inf, X509_INFO_free); |
| #if defined(__clang__) && __clang_major__ >= 16 |
| #pragma clang diagnostic pop |
| #endif |
| BIO_free(cbio); |
| |
| /* if we did not end up importing anything, treat that as an error */ |
| return (count > 0) ? CURLE_OK : CURLE_SSL_CACERT_BADFILE; |
| } |
| |
| #ifdef USE_WIN32_CRYPTO |
| static CURLcode ossl_win_load_store(struct Curl_easy *data, |
| const char *win_store, |
| X509_STORE *store, |
| bool *padded) |
| { |
| CURLcode result = CURLE_OK; |
| HCERTSTORE hStore; |
| |
| *padded = FALSE; |
| |
| hStore = CertOpenSystemStoreA(0, win_store); |
| if(hStore) { |
| PCCERT_CONTEXT pContext = NULL; |
| /* The array of enhanced key usage OIDs will vary per certificate and |
| is declared outside of the loop so that rather than malloc/free each |
| iteration we can grow it with realloc, when necessary. */ |
| CERT_ENHKEY_USAGE *enhkey_usage = NULL; |
| DWORD enhkey_usage_size = 0; |
| |
| /* This loop makes a best effort to import all valid certificates from |
| the MS root store. If a certificate cannot be imported it is |
| skipped. 'result' is used to store only hard-fail conditions (such |
| as out of memory) that cause an early break. */ |
| result = CURLE_OK; |
| for(;;) { |
| X509 *x509; |
| FILETIME now; |
| BYTE key_usage[2]; |
| DWORD req_size; |
| const unsigned char *encoded_cert; |
| pContext = CertEnumCertificatesInStore(hStore, pContext); |
| if(!pContext) |
| break; |
| |
| #if defined(DEBUGBUILD) && !defined(CURL_DISABLE_VERBOSE_STRINGS) |
| else { |
| char cert_name[256]; |
| if(!CertGetNameStringA(pContext, CERT_NAME_SIMPLE_DISPLAY_TYPE, 0, |
| NULL, cert_name, sizeof(cert_name))) |
| infof(data, "SSL: unknown cert name"); |
| else |
| infof(data, "SSL: Checking cert \"%s\"", cert_name); |
| } |
| #endif |
| encoded_cert = (const unsigned char *)pContext->pbCertEncoded; |
| if(!encoded_cert) |
| continue; |
| |
| GetSystemTimeAsFileTime(&now); |
| if(CompareFileTime(&pContext->pCertInfo->NotBefore, &now) > 0 || |
| CompareFileTime(&now, &pContext->pCertInfo->NotAfter) > 0) |
| continue; |
| |
| /* If key usage exists check for signing attribute */ |
| if(CertGetIntendedKeyUsage(pContext->dwCertEncodingType, |
| pContext->pCertInfo, |
| key_usage, sizeof(key_usage))) { |
| if(!(key_usage[0] & CERT_KEY_CERT_SIGN_KEY_USAGE)) |
| continue; |
| } |
| else if(GetLastError()) |
| continue; |
| |
| /* If enhanced key usage exists check for server auth attribute. |
| * |
| * Note "In a Microsoft environment, a certificate might also have |
| * EKU extended properties that specify valid uses for the |
| * certificate." The call below checks both, and behavior varies |
| * depending on what is found. For more details see |
| * CertGetEnhancedKeyUsage doc. |
| */ |
| if(CertGetEnhancedKeyUsage(pContext, 0, NULL, &req_size)) { |
| if(req_size && req_size > enhkey_usage_size) { |
| void *tmp = curlx_realloc(enhkey_usage, req_size); |
| |
| if(!tmp) { |
| failf(data, "SSL: Out of memory allocating for OID list"); |
| result = CURLE_OUT_OF_MEMORY; |
| break; |
| } |
| |
| enhkey_usage = (CERT_ENHKEY_USAGE *)tmp; |
| enhkey_usage_size = req_size; |
| } |
| |
| if(CertGetEnhancedKeyUsage(pContext, 0, enhkey_usage, &req_size)) { |
| if(!enhkey_usage->cUsageIdentifier) { |
| /* "If GetLastError returns CRYPT_E_NOT_FOUND, the certificate |
| is good for all uses. If it returns zero, the certificate |
| has no valid uses." */ |
| if((HRESULT)GetLastError() != CRYPT_E_NOT_FOUND) |
| continue; |
| } |
| else { |
| DWORD i; |
| bool found = FALSE; |
| |
| for(i = 0; i < enhkey_usage->cUsageIdentifier; ++i) { |
| if(!strcmp("1.3.6.1.5.5.7.3.1" /* OID server auth */, |
| enhkey_usage->rgpszUsageIdentifier[i])) { |
| found = TRUE; |
| break; |
| } |
| } |
| |
| if(!found) |
| continue; |
| } |
| } |
| else |
| continue; |
| } |
| else |
| continue; |
| |
| x509 = d2i_X509(NULL, &encoded_cert, (long)pContext->cbCertEncoded); |
| if(!x509) |
| continue; |
| |
| /* Try to import the certificate. This may fail for legitimate reasons |
| such as duplicate certificate, which is allowed by MS but not |
| OpenSSL. */ |
| if(X509_STORE_add_cert(store, x509) == 1) { |
| #if defined(DEBUGBUILD) && !defined(CURL_DISABLE_VERBOSE_STRINGS) |
| infof(data, "SSL: Imported cert"); |
| #endif |
| *padded = TRUE; |
| } |
| X509_free(x509); |
| } |
| |
| curlx_free(enhkey_usage); |
| CertFreeCertificateContext(pContext); |
| CertCloseStore(hStore, 0); |
| |
| if(result) |
| return result; |
| } |
| |
| return result; |
| } |
| |
| static CURLcode ossl_windows_load_anchors(struct Curl_cfilter *cf, |
| struct Curl_easy *data, |
| X509_STORE *store, |
| bool *padded) |
| { |
| /* Import certificates from the Windows root certificate store if |
| requested. |
| https://stackoverflow.com/questions/9507184/ |
| https://github.com/d3x0r/SACK/blob/master/src/netlib/ssl_layer.c#L1037 |
| https://datatracker.ietf.org/doc/html/rfc5280 */ |
| const char *win_stores[] = { |
| "ROOT", /* Trusted Root Certification Authorities */ |
| "CA" /* Intermediate Certification Authorities */ |
| }; |
| size_t i; |
| CURLcode result = CURLE_OK; |
| |
| *padded = FALSE; |
| for(i = 0; i < CURL_ARRAYSIZE(win_stores); ++i) { |
| bool store_added = FALSE; |
| result = ossl_win_load_store(data, win_stores[i], store, &store_added); |
| if(result) |
| return result; |
| if(store_added) { |
| CURL_TRC_CF(data, cf, "added trust anchors from Windows %s store", |
| win_stores[i]); |
| *padded = TRUE; |
| } |
| else |
| infof(data, "error importing Windows %s store, continuing anyway", |
| win_stores[i]); |
| } |
| return result; |
| } |
| |
| #endif /* USE_WIN32_CRYPTO */ |
| |
| static CURLcode ossl_load_trust_anchors(struct Curl_cfilter *cf, |
| struct Curl_easy *data, |
| struct ossl_ctx *octx, |
| X509_STORE *store) |
| { |
| struct ssl_primary_config *conn_config = Curl_ssl_cf_get_primary_config(cf); |
| struct ssl_config_data *ssl_config = Curl_ssl_cf_get_config(cf, data); |
| CURLcode result = CURLE_OK; |
| const char * const ssl_cafile = |
| /* CURLOPT_CAINFO_BLOB overrides CURLOPT_CAINFO */ |
| (conn_config->ca_info_blob ? NULL : conn_config->CAfile); |
| const char * const ssl_capath = conn_config->CApath; |
| bool have_native_check = FALSE; |
| |
| octx->store_is_empty = TRUE; |
| if(ssl_config->native_ca_store) { |
| #ifdef USE_WIN32_CRYPTO |
| bool added = FALSE; |
| result = ossl_windows_load_anchors(cf, data, store, &added); |
| if(result) |
| return result; |
| if(added) { |
| infof(data, " Native: Windows System Stores ROOT+CA"); |
| octx->store_is_empty = FALSE; |
| } |
| #elif defined(USE_APPLE_SECTRUST) |
| infof(data, " Native: Apple SecTrust"); |
| have_native_check = TRUE; |
| #endif |
| } |
| |
| if(conn_config->ca_info_blob) { |
| result = load_cacert_from_memory(store, conn_config->ca_info_blob); |
| if(result) { |
| failf(data, "error adding trust anchors from certificate blob: %d", |
| result); |
| return result; |
| } |
| infof(data, " CA Blob from configuration"); |
| octx->store_is_empty = FALSE; |
| } |
| |
| if(ssl_cafile || ssl_capath) { |
| #ifdef HAVE_OPENSSL3 |
| /* OpenSSL 3.0.0 has deprecated SSL_CTX_load_verify_locations */ |
| if(ssl_cafile) { |
| if(!X509_STORE_load_file(store, ssl_cafile)) { |
| if(octx->store_is_empty && !have_native_check) { |
| /* Fail if we insist on successfully verifying the server. */ |
| failf(data, "error adding trust anchors from file: %s", ssl_cafile); |
| return CURLE_SSL_CACERT_BADFILE; |
| } |
| else |
| infof(data, "error setting certificate file, continuing anyway"); |
| } |
| infof(data, " CAfile: %s", ssl_cafile); |
| octx->store_is_empty = FALSE; |
| } |
| if(ssl_capath) { |
| if(!X509_STORE_load_path(store, ssl_capath)) { |
| if(octx->store_is_empty && !have_native_check) { |
| /* Fail if we insist on successfully verifying the server. */ |
| failf(data, "error adding trust anchors from path: %s", ssl_capath); |
| return CURLE_SSL_CACERT_BADFILE; |
| } |
| else |
| infof(data, "error setting certificate path, continuing anyway"); |
| } |
| infof(data, " CApath: %s", ssl_capath); |
| octx->store_is_empty = FALSE; |
| } |
| #else |
| /* tell OpenSSL where to find CA certificates that are used to verify the |
| server's certificate. */ |
| if(!X509_STORE_load_locations(store, ssl_cafile, ssl_capath)) { |
| if(octx->store_is_empty && !have_native_check) { |
| /* Fail if we insist on successfully verifying the server. */ |
| failf(data, "error adding trust anchors from locations:" |
| " CAfile: %s CApath: %s", |
| ssl_cafile ? ssl_cafile : "none", |
| ssl_capath ? ssl_capath : "none"); |
| return CURLE_SSL_CACERT_BADFILE; |
| } |
| else { |
| infof(data, "error setting certificate verify locations," |
| " continuing anyway"); |
| } |
| } |
| if(ssl_cafile) |
| infof(data, " CAfile: %s", ssl_cafile); |
| if(ssl_capath) |
| infof(data, " CApath: %s", ssl_capath); |
| octx->store_is_empty = FALSE; |
| #endif |
| } |
| |
| #ifdef CURL_CA_FALLBACK |
| if(octx->store_is_empty) { |
| /* verifying the peer without any CA certificates will not |
| work so use OpenSSL's built-in default as fallback */ |
| X509_STORE_set_default_paths(store); |
| infof(data, " OpenSSL default paths (fallback)"); |
| octx->store_is_empty = FALSE; |
| } |
| #endif |
| if(octx->store_is_empty && !have_native_check) |
| infof(data, " no trust anchors configured"); |
| |
| return result; |
| } |
| |
| static CURLcode ossl_populate_x509_store(struct Curl_cfilter *cf, |
| struct Curl_easy *data, |
| struct ossl_ctx *octx, |
| X509_STORE *store) |
| { |
| struct ssl_primary_config *conn_config = Curl_ssl_cf_get_primary_config(cf); |
| struct ssl_config_data *ssl_config = Curl_ssl_cf_get_config(cf, data); |
| CURLcode result = CURLE_OK; |
| X509_LOOKUP *lookup = NULL; |
| const char * const ssl_crlfile = ssl_config->primary.CRLfile; |
| unsigned long x509flags = 0; |
| |
| CURL_TRC_CF(data, cf, "configuring OpenSSL's x509 trust store"); |
| if(!store) |
| return CURLE_OUT_OF_MEMORY; |
| |
| if(!conn_config->verifypeer) { |
| infof(data, "SSL Trust: peer verification disabled"); |
| return CURLE_OK; |
| } |
| |
| infof(data, "SSL Trust Anchors:"); |
| result = ossl_load_trust_anchors(cf, data, octx, store); |
| if(result) |
| return result; |
| |
| /* Does not make sense to load a CRL file without peer verification */ |
| if(ssl_crlfile) { |
| /* tell OpenSSL where to find CRL file that is used to check certificate |
| * revocation */ |
| lookup = X509_STORE_add_lookup(store, X509_LOOKUP_file()); |
| if(!lookup || |
| (!X509_load_crl_file(lookup, ssl_crlfile, X509_FILETYPE_PEM)) ) { |
| failf(data, "error loading CRL file: %s", ssl_crlfile); |
| return CURLE_SSL_CRL_BADFILE; |
| } |
| x509flags = X509_V_FLAG_CRL_CHECK | X509_V_FLAG_CRL_CHECK_ALL; |
| infof(data, " CRLfile: %s", ssl_crlfile); |
| } |
| |
| /* Try building a chain using issuers in the trusted store first to avoid |
| problems with server-sent legacy intermediates. Newer versions of |
| OpenSSL do alternate chain checking by default but we do not know how to |
| determine that in a reliable manner. |
| https://web.archive.org/web/20190422050538/rt.openssl.org/Ticket/Display.html?id=3621 |
| */ |
| x509flags |= X509_V_FLAG_TRUSTED_FIRST; |
| |
| if(!ssl_config->no_partialchain && !ssl_crlfile) { |
| /* Have intermediate certificates in the trust store be treated as |
| trust-anchors, in the same way as self-signed root CA certificates are. |
| This allows users to verify servers using the intermediate cert only, |
| instead of needing the whole chain. |
| |
| Due to OpenSSL bug https://github.com/openssl/openssl/issues/5081 we |
| cannot do partial chains with a CRL check. |
| */ |
| x509flags |= X509_V_FLAG_PARTIAL_CHAIN; |
| } |
| (void)X509_STORE_set_flags(store, x509flags); |
| |
| return result; |
| } |
| |
| /* key to use at `multi->proto_hash` */ |
| #define MPROTO_OSSL_X509_KEY "tls:ossl:x509:share" |
| |
| struct ossl_x509_share { |
| char *CAfile; /* CAfile path used to generate X509 store */ |
| X509_STORE *store; /* cached X509 store or NULL if none */ |
| struct curltime time; /* when the cached store was created */ |
| BIT(store_is_empty); /* no certs/paths/blobs are in the store */ |
| BIT(no_partialchain); /* keep partial chain state */ |
| }; |
| |
| static void oss_x509_share_free(void *key, size_t key_len, void *p) |
| { |
| struct ossl_x509_share *share = p; |
| DEBUGASSERT(key_len == (sizeof(MPROTO_OSSL_X509_KEY) - 1)); |
| DEBUGASSERT(!memcmp(MPROTO_OSSL_X509_KEY, key, key_len)); |
| (void)key; |
| (void)key_len; |
| if(share->store) { |
| X509_STORE_free(share->store); |
| } |
| curlx_free(share->CAfile); |
| curlx_free(share); |
| } |
| |
| static bool ossl_cached_x509_store_expired(struct Curl_easy *data, |
| const struct ossl_x509_share *mb) |
| { |
| const struct ssl_general_config *cfg = &data->set.general_ssl; |
| if(cfg->ca_cache_timeout < 0) |
| return FALSE; |
| else { |
| timediff_t elapsed_ms = curlx_ptimediff_ms(Curl_pgrs_now(data), &mb->time); |
| timediff_t timeout_ms = cfg->ca_cache_timeout * (timediff_t)1000; |
| |
| return elapsed_ms >= timeout_ms; |
| } |
| } |
| |
| static bool ossl_cached_x509_store_different(struct Curl_cfilter *cf, |
| const struct Curl_easy *data, |
| const struct ossl_x509_share *mb) |
| { |
| struct ssl_primary_config *conn_config = Curl_ssl_cf_get_primary_config(cf); |
| struct ssl_config_data *ssl_config = |
| Curl_ssl_cf_get_config(cf, CURL_UNCONST(data)); |
| if(mb->no_partialchain != ssl_config->no_partialchain) |
| return TRUE; |
| if(!mb->CAfile || !conn_config->CAfile) |
| return mb->CAfile != conn_config->CAfile; |
| return strcmp(mb->CAfile, conn_config->CAfile); |
| } |
| |
| static X509_STORE *ossl_get_cached_x509_store(struct Curl_cfilter *cf, |
| struct Curl_easy *data, |
| bool *pempty) |
| { |
| struct Curl_multi *multi = data->multi; |
| struct ossl_x509_share *share; |
| X509_STORE *store = NULL; |
| |
| DEBUGASSERT(multi); |
| *pempty = TRUE; |
| share = multi ? Curl_hash_pick(&multi->proto_hash, |
| CURL_UNCONST(MPROTO_OSSL_X509_KEY), |
| sizeof(MPROTO_OSSL_X509_KEY) - 1) : NULL; |
| if(share && share->store && |
| !ossl_cached_x509_store_expired(data, share) && |
| !ossl_cached_x509_store_different(cf, data, share)) { |
| store = share->store; |
| *pempty = share->store_is_empty; |
| } |
| |
| return store; |
| } |
| |
| static void ossl_set_cached_x509_store(struct Curl_cfilter *cf, |
| struct Curl_easy *data, |
| X509_STORE *store, |
| bool is_empty) |
| { |
| struct ssl_primary_config *conn_config = Curl_ssl_cf_get_primary_config(cf); |
| struct Curl_multi *multi = data->multi; |
| struct ossl_x509_share *share; |
| |
| DEBUGASSERT(multi); |
| if(!multi) |
| return; |
| share = Curl_hash_pick(&multi->proto_hash, |
| CURL_UNCONST(MPROTO_OSSL_X509_KEY), |
| sizeof(MPROTO_OSSL_X509_KEY) - 1); |
| |
| if(!share) { |
| share = curlx_calloc(1, sizeof(*share)); |
| if(!share) |
| return; |
| if(!Curl_hash_add2(&multi->proto_hash, |
| CURL_UNCONST(MPROTO_OSSL_X509_KEY), |
| sizeof(MPROTO_OSSL_X509_KEY) - 1, |
| share, oss_x509_share_free)) { |
| curlx_free(share); |
| return; |
| } |
| } |
| |
| if(X509_STORE_up_ref(store)) { |
| char *CAfile = NULL; |
| struct ssl_config_data *ssl_config = |
| Curl_ssl_cf_get_config(cf, CURL_UNCONST(data)); |
| |
| if(conn_config->CAfile) { |
| CAfile = curlx_strdup(conn_config->CAfile); |
| if(!CAfile) { |
| X509_STORE_free(store); |
| return; |
| } |
| } |
| |
| if(share->store) { |
| X509_STORE_free(share->store); |
| curlx_free(share->CAfile); |
| } |
| |
| share->time = *Curl_pgrs_now(data); |
| share->store = store; |
| share->store_is_empty = is_empty; |
| share->CAfile = CAfile; |
| share->no_partialchain = ssl_config->no_partialchain; |
| } |
| } |
| |
| CURLcode Curl_ssl_setup_x509_store(struct Curl_cfilter *cf, |
| struct Curl_easy *data, |
| struct ossl_ctx *octx) |
| { |
| struct ssl_primary_config *conn_config = Curl_ssl_cf_get_primary_config(cf); |
| struct ssl_config_data *ssl_config = Curl_ssl_cf_get_config(cf, data); |
| CURLcode result = CURLE_OK; |
| X509_STORE *cached_store; |
| bool cache_criteria_met, is_empty; |
| |
| /* Consider the X509 store cacheable if it comes exclusively from a CAfile, |
| or no source is provided and we are falling back to OpenSSL's built-in |
| default. */ |
| cache_criteria_met = (data->set.general_ssl.ca_cache_timeout != 0) && |
| conn_config->verifypeer && |
| !conn_config->CApath && |
| !conn_config->ca_info_blob && |
| !ssl_config->primary.CRLfile && |
| !ssl_config->native_ca_store; |
| |
| ERR_set_mark(); |
| |
| cached_store = ossl_get_cached_x509_store(cf, data, &is_empty); |
| if(cached_store && cache_criteria_met && X509_STORE_up_ref(cached_store)) { |
| SSL_CTX_set_cert_store(octx->ssl_ctx, cached_store); |
| octx->store_is_empty = is_empty; |
| } |
| else { |
| X509_STORE *store = SSL_CTX_get_cert_store(octx->ssl_ctx); |
| |
| result = ossl_populate_x509_store(cf, data, octx, store); |
| if(result == CURLE_OK && cache_criteria_met) { |
| ossl_set_cached_x509_store(cf, data, store, octx->store_is_empty); |
| } |
| } |
| |
| ERR_pop_to_mark(); |
| |
| return result; |
| } |
| |
| static CURLcode |
| ossl_init_session_and_alpns(struct ossl_ctx *octx, |
| struct Curl_cfilter *cf, |
| struct Curl_easy *data, |
| struct ssl_peer *peer, |
| const struct alpn_spec *alpns_requested, |
| Curl_ossl_init_session_reuse_cb *sess_reuse_cb) |
| { |
| struct ssl_config_data *ssl_config = Curl_ssl_cf_get_config(cf, data); |
| struct ssl_primary_config *conn_cfg = Curl_ssl_cf_get_primary_config(cf); |
| struct alpn_spec alpns; |
| char error_buffer[256]; |
| CURLcode result; |
| |
| Curl_alpn_copy(&alpns, alpns_requested); |
| |
| octx->reused_session = FALSE; |
| if(Curl_ssl_scache_use(cf, data) && !conn_cfg->verifystatus) { |
| struct Curl_ssl_session *scs = NULL; |
| |
| result = Curl_ssl_scache_take(cf, data, peer->scache_key, &scs); |
| if(!result && scs && scs->sdata && scs->sdata_len) { |
| const unsigned char *der_sessionid = scs->sdata; |
| size_t der_sessionid_size = scs->sdata_len; |
| SSL_SESSION *ssl_session = NULL; |
| |
| /* If OpenSSL does not accept the session from the cache, this |
| * is not an error. We just continue without it. */ |
| ssl_session = d2i_SSL_SESSION(NULL, &der_sessionid, |
| (long)der_sessionid_size); |
| if(ssl_session) { |
| if(!SSL_set_session(octx->ssl, ssl_session)) { |
| infof(data, "SSL: SSL_set_session not accepted, " |
| "continuing without: %s", |
| ossl_strerror(ERR_get_error(), error_buffer, |
| sizeof(error_buffer))); |
| } |
| else { |
| infof(data, "SSL reusing session with ALPN '%s'", |
| scs->alpn ? scs->alpn : "-"); |
| octx->reused_session = TRUE; |
| #ifdef HAVE_OPENSSL_EARLYDATA |
| if(ssl_config->earlydata && scs->alpn && |
| SSL_SESSION_get_max_early_data(ssl_session) && |
| !cf->conn->connect_only && |
| (SSL_version(octx->ssl) == TLS1_3_VERSION)) { |
| bool do_early_data = FALSE; |
| if(sess_reuse_cb) { |
| result = sess_reuse_cb(cf, data, &alpns, scs, &do_early_data); |
| if(result) { |
| SSL_SESSION_free(ssl_session); |
| return result; |
| } |
| } |
| if(do_early_data) { |
| /* We only try the ALPN protocol the session used before, |
| * otherwise we might send early data for the wrong protocol */ |
| Curl_alpn_restrict_to(&alpns, scs->alpn); |
| } |
| } |
| #else |
| (void)ssl_config; |
| (void)sess_reuse_cb; |
| #endif |
| } |
| SSL_SESSION_free(ssl_session); |
| } |
| else { |
| infof(data, "SSL session not accepted by OpenSSL, continuing without"); |
| } |
| } |
| Curl_ssl_scache_return(cf, data, peer->scache_key, scs); |
| } |
| |
| if(alpns.count) { |
| struct alpn_proto_buf proto; |
| memset(&proto, 0, sizeof(proto)); |
| result = Curl_alpn_to_proto_buf(&proto, &alpns); |
| if(result) { |
| failf(data, "Error determining ALPN"); |
| return CURLE_SSL_CONNECT_ERROR; |
| } |
| if(SSL_set_alpn_protos(octx->ssl, proto.data, (int)proto.len)) { |
| failf(data, "Error setting ALPN"); |
| return CURLE_SSL_CONNECT_ERROR; |
| } |
| } |
| |
| return CURLE_OK; |
| } |
| |
| #ifdef HAVE_SSL_SET1_ECH_CONFIG_LIST |
| static CURLcode ossl_init_ech(struct ossl_ctx *octx, |
| struct Curl_cfilter *cf, |
| struct Curl_easy *data, |
| struct ssl_peer *peer) |
| { |
| unsigned char *ech_config = NULL; |
| size_t ech_config_len = 0; |
| char *outername = data->set.str[STRING_ECH_PUBLIC]; |
| int trying_ech_now = 0; |
| CURLcode result; |
| |
| if(!ECH_ENABLED(data)) |
| return CURLE_OK; |
| |
| if(data->set.tls_ech & CURLECH_GREASE) { |
| infof(data, "ECH: will GREASE ClientHello"); |
| # ifdef HAVE_BORINGSSL_LIKE |
| SSL_set_enable_ech_grease(octx->ssl, 1); |
| # else |
| SSL_set_options(octx->ssl, SSL_OP_ECH_GREASE); |
| # endif |
| } |
| else if(data->set.tls_ech & CURLECH_CLA_CFG) { |
| # ifdef HAVE_BORINGSSL_LIKE |
| /* have to do base64 decode here for BoringSSL */ |
| const char *b64 = data->set.str[STRING_ECH_CONFIG]; |
| |
| if(!b64) { |
| infof(data, "ECH: ECHConfig from command line empty"); |
| return CURLE_SSL_CONNECT_ERROR; |
| } |
| ech_config_len = 2 * strlen(b64); |
| result = curlx_base64_decode(b64, &ech_config, &ech_config_len); |
| if(result || !ech_config) { |
| infof(data, "ECH: cannot base64 decode ECHConfig from command line"); |
| if(data->set.tls_ech & CURLECH_HARD) |
| return result; |
| } |
| if(SSL_set1_ech_config_list(octx->ssl, ech_config, ech_config_len) != 1) { |
| infof(data, "ECH: SSL_ECH_set1_ech_config_list failed"); |
| if(data->set.tls_ech & CURLECH_HARD) { |
| curlx_free(ech_config); |
| return CURLE_SSL_CONNECT_ERROR; |
| } |
| } |
| curlx_free(ech_config); |
| trying_ech_now = 1; |
| # else |
| ech_config = (unsigned char *)data->set.str[STRING_ECH_CONFIG]; |
| if(!ech_config) { |
| infof(data, "ECH: ECHConfig from command line empty"); |
| return CURLE_SSL_CONNECT_ERROR; |
| } |
| ech_config_len = strlen(data->set.str[STRING_ECH_CONFIG]); |
| if(SSL_set1_ech_config_list(octx->ssl, ech_config, ech_config_len) != 1) { |
| infof(data, "ECH: SSL_ECH_set1_ech_config_list failed"); |
| if(data->set.tls_ech & CURLECH_HARD) |
| return CURLE_SSL_CONNECT_ERROR; |
| } |
| else |
| trying_ech_now = 1; |
| # endif |
| infof(data, "ECH: ECHConfig from command line"); |
| } |
| else { |
| struct Curl_dns_entry *dns = NULL; |
| |
| if(peer->hostname) |
| dns = Curl_dnscache_get(data, peer->hostname, peer->port, |
| cf->conn->ip_version); |
| if(!dns) { |
| infof(data, "ECH: requested but no DNS info available"); |
| if(data->set.tls_ech & CURLECH_HARD) |
| return CURLE_SSL_CONNECT_ERROR; |
| } |
| else { |
| struct Curl_https_rrinfo *rinfo = NULL; |
| |
| rinfo = dns->hinfo; |
| if(rinfo && rinfo->echconfiglist) { |
| unsigned char *ecl = rinfo->echconfiglist; |
| size_t elen = rinfo->echconfiglist_len; |
| |
| infof(data, "ECH: ECHConfig from DoH HTTPS RR"); |
| if(SSL_set1_ech_config_list(octx->ssl, ecl, elen) != 1) { |
| infof(data, "ECH: SSL_set1_ech_config_list failed"); |
| if(data->set.tls_ech & CURLECH_HARD) |
| return CURLE_SSL_CONNECT_ERROR; |
| } |
| else { |
| trying_ech_now = 1; |
| infof(data, "ECH: imported ECHConfigList of length %zu", elen); |
| } |
| } |
| else { |
| infof(data, "ECH: requested but no ECHConfig available"); |
| if(data->set.tls_ech & CURLECH_HARD) |
| return CURLE_SSL_CONNECT_ERROR; |
| } |
| Curl_resolv_unlink(data, &dns); |
| } |
| } |
| # ifdef HAVE_BORINGSSL_LIKE |
| if(trying_ech_now && outername) { |
| infof(data, "ECH: setting public_name not supported with BoringSSL"); |
| return CURLE_SSL_CONNECT_ERROR; |
| } |
| # else |
| if(trying_ech_now && outername) { |
| infof(data, "ECH: inner: '%s', outer: '%s'", |
| peer->hostname ? peer->hostname : "NULL", outername); |
| result = SSL_ech_set1_server_names(octx->ssl, |
| peer->hostname, outername, |
| 0 /* do send outer */); |
| if(result != 1) { |
| infof(data, "ECH: rv failed to set server name(s) %d [ERROR]", result); |
| return CURLE_SSL_CONNECT_ERROR; |
| } |
| } |
| # endif /* HAVE_BORINGSSL_LIKE */ |
| if(trying_ech_now && |
| SSL_set_min_proto_version(octx->ssl, TLS1_3_VERSION) != 1) { |
| infof(data, "ECH: cannot force TLSv1.3 [ERROR]"); |
| return CURLE_SSL_CONNECT_ERROR; |
| } |
| |
| return CURLE_OK; |
| } |
| #endif /* HAVE_SSL_SET1_ECH_CONFIG_LIST */ |
| |
| static CURLcode ossl_init_ssl(struct ossl_ctx *octx, |
| struct Curl_cfilter *cf, |
| struct Curl_easy *data, |
| struct ssl_peer *peer, |
| const struct alpn_spec *alpns_requested, |
| void *ssl_user_data, |
| Curl_ossl_init_session_reuse_cb *sess_reuse_cb) |
| { |
| /* Let's make an SSL structure */ |
| if(octx->ssl) |
| SSL_free(octx->ssl); |
| octx->ssl = SSL_new(octx->ssl_ctx); |
| if(!octx->ssl) { |
| failf(data, "SSL: could not create a context (handle)"); |
| return CURLE_OUT_OF_MEMORY; |
| } |
| |
| SSL_set_app_data(octx->ssl, ssl_user_data); |
| |
| #ifndef OPENSSL_NO_OCSP |
| if(Curl_ssl_cf_get_primary_config(cf)->verifystatus) |
| SSL_set_tlsext_status_type(octx->ssl, TLSEXT_STATUSTYPE_ocsp); |
| #endif |
| |
| SSL_set_connect_state(octx->ssl); |
| |
| if(peer->sni) { |
| if(!SSL_set_tlsext_host_name(octx->ssl, peer->sni)) { |
| failf(data, "Failed set SNI"); |
| return CURLE_SSL_CONNECT_ERROR; |
| } |
| } |
| |
| #ifdef HAVE_SSL_SET1_ECH_CONFIG_LIST |
| { |
| CURLcode result = ossl_init_ech(octx, cf, data, peer); |
| if(result) |
| return result; |
| } |
| #endif /* HAVE_SSL_SET1_ECH_CONFIG_LIST */ |
| |
| return ossl_init_session_and_alpns(octx, cf, data, peer, |
| alpns_requested, sess_reuse_cb); |
| } |
| |
| static CURLcode ossl_init_method(struct Curl_cfilter *cf, |
| struct Curl_easy *data, |
| struct ssl_peer *peer, |
| const SSL_METHOD **pmethod, |
| unsigned int *pssl_version_min) |
| { |
| struct ssl_primary_config *conn_config = Curl_ssl_cf_get_primary_config(cf); |
| |
| *pmethod = NULL; |
| *pssl_version_min = conn_config->version; |
| switch(peer->transport) { |
| case TRNSPRT_TCP: |
| /* check to see if we have been told to use an explicit SSL/TLS version */ |
| switch(*pssl_version_min) { |
| case CURL_SSLVERSION_DEFAULT: |
| case CURL_SSLVERSION_TLSv1: |
| case CURL_SSLVERSION_TLSv1_0: |
| case CURL_SSLVERSION_TLSv1_1: |
| case CURL_SSLVERSION_TLSv1_2: |
| case CURL_SSLVERSION_TLSv1_3: |
| /* it will be handled later with the context options */ |
| *pmethod = TLS_client_method(); |
| break; |
| case CURL_SSLVERSION_SSLv2: |
| failf(data, "No SSLv2 support"); |
| return CURLE_NOT_BUILT_IN; |
| case CURL_SSLVERSION_SSLv3: |
| failf(data, "No SSLv3 support"); |
| return CURLE_NOT_BUILT_IN; |
| default: |
| failf(data, "Unrecognized parameter passed via CURLOPT_SSLVERSION"); |
| return CURLE_SSL_CONNECT_ERROR; |
| } |
| break; |
| case TRNSPRT_QUIC: |
| *pssl_version_min = CURL_SSLVERSION_TLSv1_3; |
| if(conn_config->version_max && |
| (conn_config->version_max != CURL_SSLVERSION_MAX_DEFAULT) && |
| (conn_config->version_max != CURL_SSLVERSION_MAX_TLSv1_3)) { |
| failf(data, "QUIC needs at least TLS version 1.3"); |
| return CURLE_SSL_CONNECT_ERROR; |
| } |
| |
| #ifdef USE_OPENSSL_QUIC |
| *pmethod = OSSL_QUIC_client_method(); |
| #else |
| *pmethod = TLS_method(); |
| #endif |
| break; |
| default: |
| failf(data, "unsupported transport %d in SSL init", peer->transport); |
| return CURLE_SSL_CONNECT_ERROR; |
| } |
| |
| return *pmethod ? CURLE_OK : CURLE_SSL_CONNECT_ERROR; |
| } |
| |
| CURLcode Curl_ossl_ctx_init(struct ossl_ctx *octx, |
| struct Curl_cfilter *cf, |
| struct Curl_easy *data, |
| struct ssl_peer *peer, |
| const struct alpn_spec *alpns_requested, |
| Curl_ossl_ctx_setup_cb *cb_setup, |
| void *cb_user_data, |
| Curl_ossl_new_session_cb *cb_new_session, |
| void *ssl_user_data, |
| Curl_ossl_init_session_reuse_cb *sess_reuse_cb) |
| { |
| CURLcode result = CURLE_OK; |
| const char *ciphers; |
| const SSL_METHOD *req_method = NULL; |
| ctx_option_t ctx_options = 0; |
| struct ssl_primary_config *conn_config = Curl_ssl_cf_get_primary_config(cf); |
| struct ssl_config_data *ssl_config = Curl_ssl_cf_get_config(cf, data); |
| char * const ssl_cert = ssl_config->primary.clientcert; |
| const struct curl_blob *ssl_cert_blob = ssl_config->primary.cert_blob; |
| const char * const ssl_cert_type = ssl_config->cert_type; |
| unsigned int ssl_version_min; |
| char error_buffer[256]; |
| |
| /* Make funny stuff to get random input */ |
| result = ossl_seed(data); |
| if(result) |
| return result; |
| |
| ssl_config->certverifyresult = !X509_V_OK; |
| |
| result = ossl_init_method(cf, data, peer, &req_method, &ssl_version_min); |
| if(result) |
| return result; |
| DEBUGASSERT(req_method); |
| |
| DEBUGASSERT(!octx->ssl_ctx); |
| octx->ssl_ctx = |
| #ifdef OPENSSL_HAS_PROVIDERS |
| data->state.libctx ? |
| SSL_CTX_new_ex(data->state.libctx, data->state.propq, req_method): |
| #endif |
| SSL_CTX_new(req_method); |
| |
| if(!octx->ssl_ctx) { |
| failf(data, "SSL: could not create a context: %s", |
| ossl_strerror(ERR_peek_error(), error_buffer, sizeof(error_buffer))); |
| return CURLE_OUT_OF_MEMORY; |
| } |
| |
| if(cb_setup) { |
| result = cb_setup(cf, data, cb_user_data); |
| if(result) |
| return result; |
| } |
| |
| if(data->set.fdebug && data->set.verbose) { |
| /* the SSL trace callback is only used for verbose logging */ |
| SSL_CTX_set_msg_callback(octx->ssl_ctx, ossl_trace); |
| SSL_CTX_set_msg_callback_arg(octx->ssl_ctx, cf); |
| } |
| |
| /* OpenSSL contains code to work around lots of bugs and flaws in various |
| SSL-implementations. SSL_CTX_set_options() is used to enabled those |
| work-arounds. The man page for this option states that SSL_OP_ALL enables |
| all the work-arounds and that "It is usually safe to use SSL_OP_ALL to |
| enable the bug workaround options if compatibility with somewhat broken |
| implementations is desired." |
| |
| The "-no_ticket" option was introduced in OpenSSL 0.9.8j. it is a flag to |
| disable "rfc4507bis session ticket support". rfc4507bis was later turned |
| into the proper RFC5077: https://datatracker.ietf.org/doc/html/rfc5077 |
| |
| The enabled extension concerns the session management. I wonder how often |
| libcurl stops a connection and then resumes a TLS session. Also, sending |
| the session data is some overhead. I suggest that you just use your |
| proposed patch (which explicitly disables TICKET). |
| |
| If someone writes an application with libcurl and OpenSSL who wants to |
| enable the feature, one can do this in the SSL callback. |
| |
| SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG option enabling allowed proper |
| interoperability with web server Netscape Enterprise Server 2.0.1 which |
| was released back in 1996. |
| |
| Due to CVE-2010-4180, option SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG has |
| become ineffective as of OpenSSL 0.9.8q and 1.0.0c. In order to mitigate |
| CVE-2010-4180 when using previous OpenSSL versions we no longer enable |
| this option regardless of OpenSSL version and SSL_OP_ALL definition. |
| |
| OpenSSL added a work-around for an SSL 3.0/TLS 1.0 CBC vulnerability: |
| https://web.archive.org/web/20240114184648/openssl.org/~bodo/tls-cbc.txt. |
| In 0.9.6e they added a bit to SSL_OP_ALL that _disables_ that work-around |
| despite the fact that SSL_OP_ALL is documented to do "rather harmless" |
| workarounds. In order to keep the secure work-around, the |
| SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS bit must not be set. |
| */ |
| |
| ctx_options = SSL_OP_ALL | SSL_OP_NO_TICKET | SSL_OP_NO_COMPRESSION; |
| |
| /* mitigate CVE-2010-4180 */ |
| ctx_options &= ~(ctx_option_t)SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG; |
| |
| /* unless the user explicitly asks to allow the protocol vulnerability we |
| use the work-around */ |
| if(!ssl_config->enable_beast) |
| ctx_options &= ~(ctx_option_t)SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS; |
| |
| switch(ssl_version_min) { |
| case CURL_SSLVERSION_SSLv2: |
| case CURL_SSLVERSION_SSLv3: |
| return CURLE_NOT_BUILT_IN; |
| |
| /* "--tlsv<x.y>" options mean TLS >= version <x.y> */ |
| case CURL_SSLVERSION_DEFAULT: |
| case CURL_SSLVERSION_TLSv1: /* TLS >= version 1.0 */ |
| case CURL_SSLVERSION_TLSv1_0: /* TLS >= version 1.0 */ |
| case CURL_SSLVERSION_TLSv1_1: /* TLS >= version 1.1 */ |
| case CURL_SSLVERSION_TLSv1_2: /* TLS >= version 1.2 */ |
| case CURL_SSLVERSION_TLSv1_3: /* TLS >= version 1.3 */ |
| /* asking for any TLS version as the minimum, means no SSL versions |
| allowed */ |
| ctx_options |= SSL_OP_NO_SSLv2; |
| ctx_options |= SSL_OP_NO_SSLv3; |
| |
| result = ossl_set_ssl_version_min_max(cf, octx->ssl_ctx, ssl_version_min); |
| if(result) |
| return result; |
| break; |
| |
| default: |
| failf(data, "Unrecognized parameter passed via CURLOPT_SSLVERSION"); |
| return CURLE_SSL_CONNECT_ERROR; |
| } |
| |
| SSL_CTX_set_options(octx->ssl_ctx, ctx_options); |
| SSL_CTX_set_read_ahead(octx->ssl_ctx, 1); |
| |
| /* Max TLS1.2 record size 0x4000 + 0x800. |
| OpenSSL supports processing "jumbo TLS record" (8 TLS records) in one go |
| for some algorithms, so match that here. |
| Experimentation shows that a slightly larger buffer is needed |
| to avoid short reads. |
| |
| However using a large buffer (8 packets) actually decreases performance. |
| 4 packets is better. |
| */ |
| #ifdef HAVE_SSL_CTX_SET_DEFAULT_READ_BUFFER_LEN |
| SSL_CTX_set_default_read_buffer_len(octx->ssl_ctx, 0x401e * 4); |
| #endif |
| |
| /* We do retry writes sometimes from another buffer address */ |
| SSL_CTX_set_mode(octx->ssl_ctx, SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER); |
| |
| ciphers = conn_config->cipher_list; |
| if(!ciphers && (peer->transport != TRNSPRT_QUIC)) |
| ciphers = NULL; |
| if(ciphers && (ssl_version_min < CURL_SSLVERSION_TLSv1_3)) { |
| if(!SSL_CTX_set_cipher_list(octx->ssl_ctx, ciphers)) { |
| failf(data, "failed setting cipher list: %s", ciphers); |
| return CURLE_SSL_CIPHER; |
| } |
| infof(data, "Cipher selection: %s", ciphers); |
| } |
| |
| #ifdef HAVE_SSL_CTX_SET_CIPHERSUITES |
| { |
| const char *ciphers13 = conn_config->cipher_list13; |
| if(ciphers13 && |
| (!conn_config->version_max || |
| (conn_config->version_max == CURL_SSLVERSION_MAX_DEFAULT) || |
| (conn_config->version_max >= CURL_SSLVERSION_MAX_TLSv1_3))) { |
| if(!SSL_CTX_set_ciphersuites(octx->ssl_ctx, ciphers13)) { |
| failf(data, "failed setting TLS 1.3 cipher suite: %s", ciphers13); |
| return CURLE_SSL_CIPHER; |
| } |
| infof(data, "TLS 1.3 cipher selection: %s", ciphers13); |
| } |
| } |
| #endif |
| |
| if(ssl_cert || ssl_cert_blob || ssl_cert_type) { |
| result = client_cert(data, octx->ssl_ctx, |
| ssl_cert, ssl_cert_blob, ssl_cert_type, |
| ssl_config->key, ssl_config->key_blob, |
| ssl_config->key_type, ssl_config->key_passwd); |
| if(result) |
| /* failf() is already done in client_cert() */ |
| return result; |
| } |
| |
| #ifdef HAVE_SSL_CTX_SET_POST_HANDSHAKE_AUTH |
| /* OpenSSL 1.1.1 requires clients to opt-in for PHA */ |
| SSL_CTX_set_post_handshake_auth(octx->ssl_ctx, 1); |
| #endif |
| |
| { |
| const char *curves = conn_config->curves; |
| if(curves) { |
| #ifdef HAVE_BORINGSSL_LIKE |
| #define OSSL_CURVE_CAST(x) (x) |
| #else |
| #define OSSL_CURVE_CAST(x) (char *)CURL_UNCONST(x) |
| #endif |
| if(!SSL_CTX_set1_curves_list(octx->ssl_ctx, OSSL_CURVE_CAST(curves))) { |
| failf(data, "failed setting curves list: '%s'", curves); |
| return CURLE_SSL_CIPHER; |
| } |
| } |
| } |
| |
| #ifdef HAVE_SSL_CTX_SET1_SIGALGS |
| #define OSSL_SIGALG_CAST(x) OSSL_CURVE_CAST(x) |
| { |
| const char *signature_algorithms = conn_config->signature_algorithms; |
| if(signature_algorithms) { |
| if(!SSL_CTX_set1_sigalgs_list(octx->ssl_ctx, |
| OSSL_SIGALG_CAST(signature_algorithms))) { |
| failf(data, "failed setting signature algorithms: '%s'", |
| signature_algorithms); |
| return CURLE_SSL_CIPHER; |
| } |
| } |
| } |
| #endif |
| |
| #if defined(HAVE_OPENSSL_SRP) && defined(USE_TLS_SRP) |
| if(ssl_config->primary.username && Curl_auth_allowed_to_host(data)) { |
| char * const ssl_username = ssl_config->primary.username; |
| char * const ssl_password = ssl_config->primary.password; |
| infof(data, "Using TLS-SRP username: %s", ssl_username); |
| |
| if(!SSL_CTX_set_srp_username(octx->ssl_ctx, ssl_username)) { |
| failf(data, "Unable to set SRP username"); |
| return CURLE_BAD_FUNCTION_ARGUMENT; |
| } |
| if(!SSL_CTX_set_srp_password(octx->ssl_ctx, ssl_password)) { |
| failf(data, "failed setting SRP password"); |
| return CURLE_BAD_FUNCTION_ARGUMENT; |
| } |
| if(!conn_config->cipher_list) { |
| infof(data, "Setting cipher list SRP"); |
| |
| if(!SSL_CTX_set_cipher_list(octx->ssl_ctx, "SRP")) { |
| failf(data, "failed setting SRP cipher list"); |
| return CURLE_SSL_CIPHER; |
| } |
| } |
| } |
| #endif /* HAVE_OPENSSL_SRP && USE_TLS_SRP */ |
| |
| /* OpenSSL always tries to verify the peer. By setting the failure mode |
| * to NONE, we allow the connect to complete, regardless of the outcome. |
| * We then explicitly check the result and may try alternatives like |
| * Apple's SecTrust for verification. */ |
| SSL_CTX_set_verify(octx->ssl_ctx, SSL_VERIFY_NONE, NULL); |
| |
| /* Enable logging of secrets to the file specified in env SSLKEYLOGFILE. */ |
| #ifdef HAVE_KEYLOG_CALLBACK |
| if(Curl_tls_keylog_enabled()) { |
| SSL_CTX_set_keylog_callback(octx->ssl_ctx, ossl_keylog_callback); |
| } |
| #endif |
| |
| if(cb_new_session) { |
| /* Enable the session cache because it is a prerequisite for the |
| * "new session" callback. Use the "external storage" mode to prevent |
| * OpenSSL from creating an internal session cache. |
| */ |
| SSL_CTX_set_session_cache_mode(octx->ssl_ctx, |
| SSL_SESS_CACHE_CLIENT | |
| SSL_SESS_CACHE_NO_INTERNAL); |
| SSL_CTX_sess_set_new_cb(octx->ssl_ctx, cb_new_session); |
| } |
| |
| /* give application a chance to interfere with SSL set up. */ |
| if(data->set.ssl.fsslctx) { |
| /* When a user callback is installed to modify the SSL_CTX, |
| * we need to do the full initialization before calling it. |
| * See: #11800 */ |
| if(!octx->x509_store_setup) { |
| result = Curl_ssl_setup_x509_store(cf, data, octx); |
| if(result) |
| return result; |
| octx->x509_store_setup = TRUE; |
| } |
| Curl_set_in_callback(data, TRUE); |
| result = (*data->set.ssl.fsslctx)(data, octx->ssl_ctx, |
| data->set.ssl.fsslctxp); |
| Curl_set_in_callback(data, FALSE); |
| if(result) { |
| failf(data, "error signaled by ssl ctx callback"); |
| return result; |
| } |
| } |
| |
| return ossl_init_ssl(octx, cf, data, peer, alpns_requested, |
| ssl_user_data, sess_reuse_cb); |
| } |
| |
| static CURLcode ossl_on_session_reuse(struct Curl_cfilter *cf, |
| struct Curl_easy *data, |
| struct alpn_spec *alpns, |
| struct Curl_ssl_session *scs, |
| bool *do_early_data) |
| { |
| struct ssl_connect_data *connssl = cf->ctx; |
| CURLcode result = CURLE_OK; |
| |
| *do_early_data = FALSE; |
| connssl->earlydata_max = scs->earlydata_max; |
| if(!connssl->earlydata_max) { |
| CURL_TRC_CF(data, cf, "SSL session does not allow earlydata"); |
| } |
| else if(!Curl_alpn_contains_proto(alpns, scs->alpn)) { |
| CURL_TRC_CF(data, cf, "SSL session has different ALPN, no early data"); |
| } |
| else { |
| infof(data, "SSL session allows %zu bytes of early data, " |
| "reusing ALPN '%s'", connssl->earlydata_max, scs->alpn); |
| connssl->earlydata_state = ssl_earlydata_await; |
| connssl->state = ssl_connection_deferred; |
| result = Curl_alpn_set_negotiated(cf, data, connssl, |
| (const unsigned char *)scs->alpn, |
| scs->alpn ? strlen(scs->alpn) : 0); |
| *do_early_data = !result; |
| } |
| return result; |
| } |
| |
| void Curl_ossl_report_handshake(struct Curl_easy *data, struct ossl_ctx *octx) |
| { |
| #ifndef CURL_DISABLE_VERBOSE_STRINGS |
| if(Curl_trc_is_verbose(data)) { |
| int psigtype_nid = NID_undef; |
| const char *negotiated_group_name = NULL; |
| |
| #ifdef HAVE_OPENSSL3 |
| SSL_get_peer_signature_type_nid(octx->ssl, &psigtype_nid); |
| #if OPENSSL_VERSION_NUMBER >= 0x30200000L |
| negotiated_group_name = SSL_get0_group_name(octx->ssl); |
| #else |
| negotiated_group_name = |
| OBJ_nid2sn(SSL_get_negotiated_group(octx->ssl) & 0x0000FFFF); |
| #endif |
| #endif |
| |
| /* Informational message */ |
| infof(data, "SSL connection using %s / %s / %s / %s", |
| SSL_get_version(octx->ssl), |
| SSL_get_cipher(octx->ssl), |
| negotiated_group_name ? negotiated_group_name : "[blank]", |
| OBJ_nid2sn(psigtype_nid)); |
| } |
| #else |
| (void)data; |
| (void)octx; |
| #endif /* CURL_DISABLE_VERBOSE_STRINGS */ |
| } |
| |
| static CURLcode ossl_connect_step1(struct Curl_cfilter *cf, |
| struct Curl_easy *data) |
| { |
| struct ssl_connect_data *connssl = cf->ctx; |
| struct ossl_ctx *octx = (struct ossl_ctx *)connssl->backend; |
| BIO *bio; |
| CURLcode result; |
| |
| DEBUGASSERT(ssl_connect_1 == connssl->connecting_state); |
| DEBUGASSERT(octx); |
| |
| result = Curl_ossl_ctx_init(octx, cf, data, &connssl->peer, |
| connssl->alpn, NULL, NULL, |
| ossl_new_session_cb, cf, |
| ossl_on_session_reuse); |
| if(result) |
| return result; |
| |
| octx->bio_method = ossl_bio_cf_method_create(); |
| if(!octx->bio_method) |
| return CURLE_OUT_OF_MEMORY; |
| bio = BIO_new(octx->bio_method); |
| if(!bio) |
| return CURLE_OUT_OF_MEMORY; |
| |
| BIO_set_data(bio, cf); |
| #ifdef HAVE_SSL_SET0_WBIO |
| /* with OpenSSL v1.1.1 we get an alternative to SSL_set_bio() that works |
| * without backward compat quirks. Every call takes one reference, so we |
| * up it and pass. SSL* then owns it and will free. |
| * We check on the function in configure, since LibreSSL and friends |
| * each have their own versions to add support for this. */ |
| BIO_up_ref(bio); |
| SSL_set0_rbio(octx->ssl, bio); |
| SSL_set0_wbio(octx->ssl, bio); |
| #else |
| SSL_set_bio(octx->ssl, bio, bio); |
| #endif |
| |
| if(connssl->alpn && (connssl->state != ssl_connection_deferred)) { |
| struct alpn_proto_buf proto; |
| memset(&proto, 0, sizeof(proto)); |
| Curl_alpn_to_proto_str(&proto, connssl->alpn); |
| infof(data, VTLS_INFOF_ALPN_OFFER_1STR, proto.data); |
| } |
| |
| connssl->connecting_state = ssl_connect_2; |
| return CURLE_OK; |
| } |
| |
| #ifdef HAVE_SSL_SET1_ECH_CONFIG_LIST |
| /* If we have retry configs, then trace those out */ |
| static void ossl_trace_ech_retry_configs(struct Curl_easy *data, SSL *ssl, |
| int reason) |
| { |
| CURLcode result = CURLE_OK; |
| size_t rcl = 0; |
| int rv = 1; |
| # ifndef HAVE_BORINGSSL_LIKE |
| char *inner = NULL; |
| uint8_t *rcs = NULL; |
| char *outer = NULL; |
| # else |
| const char *inner = NULL; |
| const uint8_t *rcs = NULL; |
| const char *outer = NULL; |
| size_t out_name_len = 0; |
| int servername_type = 0; |
| # endif |
| |
| /* nothing to trace if not doing ECH */ |
| if(!ECH_ENABLED(data)) |
| return; |
| # ifndef HAVE_BORINGSSL_LIKE |
| rv = SSL_ech_get1_retry_config(ssl, &rcs, &rcl); |
| # else |
| SSL_get0_ech_retry_configs(ssl, &rcs, &rcl); |
| rv = (int)rcl; |
| # endif |
| |
| if(rv && rcs) { |
| char *b64str = NULL; |
| size_t blen = 0; |
| |
| result = curlx_base64_encode(rcs, rcl, &b64str, &blen); |
| if(!result && b64str) { |
| infof(data, "ECH: retry_configs %s", b64str); |
| curlx_free(b64str); |
| #ifndef HAVE_BORINGSSL_LIKE |
| rv = SSL_ech_get1_status(ssl, &inner, &outer); |
| infof(data, "ECH: retry_configs for %s from %s, %d %d", |
| inner ? inner : "NULL", outer ? outer : "NULL", reason, rv); |
| #else |
| rv = SSL_ech_accepted(ssl); |
| servername_type = SSL_get_servername_type(ssl); |
| inner = SSL_get_servername(ssl, servername_type); |
| SSL_get0_ech_name_override(ssl, &outer, &out_name_len); |
| infof(data, "ECH: retry_configs for %s from %s, %d %d", |
| inner ? inner : "NULL", outer ? outer : "NULL", reason, rv); |
| #endif |
| } |
| } |
| else |
| infof(data, "ECH: no retry_configs (rv = %d)", rv); |
| # ifndef HAVE_BORINGSSL_LIKE |
| OPENSSL_free((void *)rcs); |
| # endif |
| return; |
| } |
| |
| #endif |
| |
| static CURLcode ossl_connect_step2(struct Curl_cfilter *cf, |
| struct Curl_easy *data) |
| { |
| int err; |
| struct ssl_connect_data *connssl = cf->ctx; |
| struct ossl_ctx *octx = (struct ossl_ctx *)connssl->backend; |
| struct ssl_config_data *ssl_config = Curl_ssl_cf_get_config(cf, data); |
| DEBUGASSERT(ssl_connect_2 == connssl->connecting_state); |
| DEBUGASSERT(octx); |
| |
| connssl->io_need = CURL_SSL_IO_NEED_NONE; |
| ERR_clear_error(); |
| |
| err = SSL_connect(octx->ssl); |
| |
| if(!octx->x509_store_setup) { |
| /* After having send off the ClientHello, we prepare the x509 |
| * store to verify the coming certificate from the server */ |
| CURLcode result = Curl_ssl_setup_x509_store(cf, data, octx); |
| if(result) |
| return result; |
| octx->x509_store_setup = TRUE; |
| } |
| |
| #ifndef HAVE_KEYLOG_CALLBACK |
| /* If key logging is enabled, wait for the handshake to complete and then |
| * proceed with logging secrets (for TLS 1.2 or older). |
| */ |
| if(Curl_tls_keylog_enabled() && !octx->keylog_done) |
| ossl_log_tls12_secret(octx->ssl, &octx->keylog_done); |
| #endif |
| |
| /* 1 is fine |
| 0 is "not successful but was shut down controlled" |
| <0 is "handshake was not successful, because a fatal error occurred" */ |
| if(err != 1) { |
| int detail = SSL_get_error(octx->ssl, err); |
| CURL_TRC_CF(data, cf, "SSL_connect() -> err=%d, detail=%d", err, detail); |
| |
| if(SSL_ERROR_WANT_READ == detail) { |
| CURL_TRC_CF(data, cf, "SSL_connect() -> want recv"); |
| connssl->io_need = CURL_SSL_IO_NEED_RECV; |
| return CURLE_AGAIN; |
| } |
| if(SSL_ERROR_WANT_WRITE == detail) { |
| CURL_TRC_CF(data, cf, "SSL_connect() -> want send"); |
| connssl->io_need = CURL_SSL_IO_NEED_SEND; |
| return CURLE_AGAIN; |
| } |
| #ifdef SSL_ERROR_WANT_ASYNC |
| if(SSL_ERROR_WANT_ASYNC == detail) { |
| CURL_TRC_CF(data, cf, "SSL_connect() -> want async"); |
| connssl->io_need = CURL_SSL_IO_NEED_RECV; |
| return CURLE_AGAIN; |
| } |
| #endif |
| #ifdef SSL_ERROR_WANT_RETRY_VERIFY |
| if(SSL_ERROR_WANT_RETRY_VERIFY == detail) { |
| CURL_TRC_CF(data, cf, "SSL_connect() -> want retry_verify"); |
| Curl_xfer_pause_recv(data, TRUE); |
| return CURLE_AGAIN; |
| } |
| #endif |
| else { |
| /* untreated error */ |
| sslerr_t errdetail; |
| char error_buffer[256] = ""; |
| CURLcode result; |
| long lerr; |
| int lib; |
| int reason; |
| |
| /* the connection failed, we are not waiting for anything else. */ |
| connssl->connecting_state = ssl_connect_2; |
| |
| /* Get the earliest error code from the thread's error queue and remove |
| the entry. */ |
| errdetail = ERR_get_error(); |
| |
| /* Extract which lib and reason */ |
| lib = ERR_GET_LIB(errdetail); |
| reason = ERR_GET_REASON(errdetail); |
| |
| if((lib == ERR_LIB_SSL) && |
| ((reason == SSL_R_CERTIFICATE_VERIFY_FAILED) || |
| (reason == SSL_R_SSLV3_ALERT_CERTIFICATE_EXPIRED))) { |
| result = CURLE_PEER_FAILED_VERIFICATION; |
| |
| lerr = SSL_get_verify_result(octx->ssl); |
| if(lerr != X509_V_OK) { |
| ssl_config->certverifyresult = lerr; |
| failf(data, "SSL certificate problem: %s", |
| X509_verify_cert_error_string(lerr)); |
| } |
| else |
| failf(data, "%s", "SSL certificate verification failed"); |
| } |
| #ifdef SSL_R_TLSV13_ALERT_CERTIFICATE_REQUIRED |
| /* SSL_R_TLSV13_ALERT_CERTIFICATE_REQUIRED is only available on |
| OpenSSL version above v1.1.1, not LibreSSL, BoringSSL, or AWS-LC */ |
| else if((lib == ERR_LIB_SSL) && |
| (reason == SSL_R_TLSV13_ALERT_CERTIFICATE_REQUIRED)) { |
| /* If client certificate is required, communicate the |
| error to client */ |
| result = CURLE_SSL_CLIENTCERT; |
| failf(data, "TLS cert problem: %s", |
| ossl_strerror(errdetail, error_buffer, sizeof(error_buffer))); |
| } |
| #endif |
| #ifdef HAVE_SSL_SET1_ECH_CONFIG_LIST |
| else if((lib == ERR_LIB_SSL) && |
| # ifndef HAVE_BORINGSSL_LIKE |
| (reason == SSL_R_ECH_REQUIRED)) { |
| # else |
| (reason == SSL_R_ECH_REJECTED)) { |
| # endif |
| |
| /* trace retry_configs if we got some */ |
| ossl_trace_ech_retry_configs(data, octx->ssl, reason); |
| |
| result = CURLE_ECH_REQUIRED; |
| failf(data, "ECH required: %s", |
| ossl_strerror(errdetail, error_buffer, sizeof(error_buffer))); |
| } |
| #endif |
| else { |
| result = CURLE_SSL_CONNECT_ERROR; |
| failf(data, "TLS connect error: %s", |
| ossl_strerror(errdetail, error_buffer, sizeof(error_buffer))); |
| } |
| |
| /* detail is already set to the SSL error above */ |
| |
| /* If we e.g. use SSLv2 request-method and the server does not like us |
| * (RST connection, etc.), OpenSSL gives no explanation whatsoever and |
| * the SO_ERROR is also lost. |
| */ |
| if(CURLE_SSL_CONNECT_ERROR == result && errdetail == 0) { |
| char extramsg[80] = ""; |
| int sockerr = SOCKERRNO; |
| |
| if(sockerr && detail == SSL_ERROR_SYSCALL) |
| curlx_strerror(sockerr, extramsg, sizeof(extramsg)); |
| failf(data, OSSL_PACKAGE " SSL_connect: %s in connection to %s:%d ", |
| extramsg[0] ? extramsg : SSL_ERROR_to_str(detail), |
| connssl->peer.hostname, connssl->peer.port); |
| } |
| |
| return result; |
| } |
| } |
| else { |
| /* we connected fine, we are not waiting for anything else. */ |
| connssl->connecting_state = ssl_connect_3; |
| Curl_ossl_report_handshake(data, octx); |
| |
| #if defined(HAVE_SSL_SET1_ECH_CONFIG_LIST) && !defined(HAVE_BORINGSSL_LIKE) |
| if(ECH_ENABLED(data)) { |
| char *inner = NULL, *outer = NULL; |
| const char *status = NULL; |
| int rv; |
| |
| rv = SSL_ech_get1_status(octx->ssl, &inner, &outer); |
| switch(rv) { |
| case SSL_ECH_STATUS_SUCCESS: |
| status = "succeeded"; |
| break; |
| case SSL_ECH_STATUS_GREASE_ECH: |
| status = "sent GREASE, got retry-configs"; |
| break; |
| case SSL_ECH_STATUS_GREASE: |
| status = "sent GREASE"; |
| break; |
| case SSL_ECH_STATUS_NOT_TRIED: |
| status = "not attempted"; |
| break; |
| case SSL_ECH_STATUS_NOT_CONFIGURED: |
| status = "not configured"; |
| break; |
| case SSL_ECH_STATUS_BACKEND: |
| status = "backend (unexpected)"; |
| break; |
| case SSL_ECH_STATUS_FAILED: |
| status = "failed"; |
| break; |
| case SSL_ECH_STATUS_BAD_CALL: |
| status = "bad call (unexpected)"; |
| break; |
| case SSL_ECH_STATUS_BAD_NAME: |
| status = "bad name (unexpected)"; |
| break; |
| default: |
| status = "unexpected status"; |
| infof(data, "ECH: unexpected status %d", rv); |
| } |
| infof(data, "ECH: result: status is %s, inner is %s, outer is %s", |
| (status ? status : "NULL"), |
| (inner ? inner : "NULL"), |
| (outer ? outer : "NULL")); |
| OPENSSL_free(inner); |
| OPENSSL_free(outer); |
| if(rv == SSL_ECH_STATUS_GREASE_ECH) { |
| /* trace retry_configs if we got some */ |
| ossl_trace_ech_retry_configs(data, octx->ssl, 0); |
| } |
| if(rv != SSL_ECH_STATUS_SUCCESS |
| && data->set.tls_ech & CURLECH_HARD) { |
| infof(data, "ECH: ech-hard failed"); |
| return CURLE_SSL_CONNECT_ERROR; |
| } |
| } |
| else { |
| infof(data, "ECH: result: status is not attempted"); |
| } |
| #endif /* HAVE_SSL_SET1_ECH_CONFIG_LIST && !HAVE_BORINGSSL_LIKE */ |
| |
| /* Sets data and len to negotiated protocol, len is 0 if no protocol was |
| * negotiated |
| */ |
| if(connssl->alpn) { |
| const unsigned char *neg_protocol; |
| unsigned int len; |
| SSL_get0_alpn_selected(octx->ssl, &neg_protocol, &len); |
| |
| return Curl_alpn_set_negotiated(cf, data, connssl, neg_protocol, len); |
| } |
| |
| return CURLE_OK; |
| } |
| } |
| |
| /* |
| * Heavily modified from: |
| * https://www.owasp.org/index.php/Certificate_and_Public_Key_Pinning#OpenSSL |
| */ |
| static CURLcode ossl_pkp_pin_peer_pubkey(struct Curl_easy *data, X509 *cert, |
| const char *pinnedpubkey) |
| { |
| /* Scratch */ |
| int len1 = 0, len2 = 0; |
| unsigned char *buff1 = NULL, *temp = NULL; |
| |
| /* Result is returned to caller */ |
| CURLcode result = CURLE_SSL_PINNEDPUBKEYNOTMATCH; |
| |
| /* if a path was not specified, do not pin */ |
| if(!pinnedpubkey) |
| return CURLE_OK; |
| |
| if(!cert) |
| return result; |
| |
| do { |
| /* Get the subjectPublicKeyInfo */ |
| /* https://groups.google.com/group/mailing.openssl.users/browse_thread/thread/d61858dae102c6c7 */ |
| len1 = i2d_X509_PUBKEY(X509_get_X509_PUBKEY(cert), NULL); |
| if(len1 < 1) |
| break; /* failed */ |
| |
| buff1 = temp = curlx_malloc(len1); |
| if(!buff1) |
| break; /* failed */ |
| |
| /* https://docs.openssl.org/master/man3/d2i_X509/ */ |
| len2 = i2d_X509_PUBKEY(X509_get_X509_PUBKEY(cert), &temp); |
| |
| /* |
| * These checks are verifying we got back the same values as when we |
| * sized the buffer. it is pretty weak since they should always be the |
| * same. But it gives us something to test. |
| */ |
| if((len1 != len2) || !temp || ((temp - buff1) != len1)) |
| break; /* failed */ |
| |
| /* End Gyrations */ |
| |
| /* The one good exit point */ |
| result = Curl_pin_peer_pubkey(data, pinnedpubkey, buff1, len1); |
| } while(0); |
| |
| if(buff1) |
| curlx_free(buff1); |
| |
| return result; |
| } |
| |
| #if !(defined(LIBRESSL_VERSION_NUMBER) && \ |
| LIBRESSL_VERSION_NUMBER < 0x3060000fL) && \ |
| !defined(HAVE_BORINGSSL_LIKE) && !defined(CURL_DISABLE_VERBOSE_STRINGS) |
| static void infof_certstack(struct Curl_easy *data, const SSL *ssl) |
| { |
| STACK_OF(X509) *certstack; |
| long verify_result; |
| int num_cert_levels; |
| int cert_level; |
| |
| if(!Curl_trc_is_verbose(data)) |
| return; |
| |
| verify_result = SSL_get_verify_result(ssl); |
| if(verify_result != X509_V_OK) |
| certstack = SSL_get_peer_cert_chain(ssl); |
| else |
| certstack = SSL_get0_verified_chain(ssl); |
| if(!certstack) |
| return; |
| num_cert_levels = sk_X509_num(certstack); |
| |
| for(cert_level = 0; cert_level < num_cert_levels; cert_level++) { |
| char cert_algorithm[80] = ""; |
| char group_name_final[80] = ""; |
| const X509_ALGOR *palg_cert = NULL; |
| const ASN1_OBJECT *paobj_cert = NULL; |
| X509 *current_cert; |
| EVP_PKEY *current_pkey; |
| int key_bits; |
| int key_sec_bits; |
| int get_group_name; |
| const char *type_name; |
| |
| current_cert = sk_X509_value(certstack, cert_level); |
| if(!current_cert) |
| continue; |
| |
| current_pkey = X509_get0_pubkey(current_cert); |
| if(!current_pkey) |
| continue; |
| |
| X509_get0_signature(NULL, &palg_cert, current_cert); |
| X509_ALGOR_get0(&paobj_cert, NULL, NULL, palg_cert); |
| OBJ_obj2txt(cert_algorithm, sizeof(cert_algorithm), paobj_cert, 0); |
| |
| key_bits = EVP_PKEY_bits(current_pkey); |
| #ifndef HAVE_OPENSSL3 |
| #define EVP_PKEY_get_security_bits EVP_PKEY_security_bits |
| #endif |
| key_sec_bits = EVP_PKEY_get_security_bits(current_pkey); |
| #ifdef HAVE_OPENSSL3 |
| { |
| char group_name[80] = ""; |
| get_group_name = EVP_PKEY_get_group_name(current_pkey, group_name, |
| sizeof(group_name), NULL); |
| curl_msnprintf(group_name_final, sizeof(group_name_final), "/%s", |
| group_name); |
| } |
| type_name = EVP_PKEY_get0_type_name(current_pkey); |
| #else |
| get_group_name = 0; |
| type_name = NULL; |
| #endif |
| |
| infof(data, " Certificate level %d: " |
| "Public key type %s%s (%d/%d Bits/secBits), signed using %s", |
| cert_level, type_name ? type_name : "?", |
| get_group_name == 0 ? "" : group_name_final, |
| key_bits, key_sec_bits, cert_algorithm); |
| } |
| } |
| #else |
| #define infof_certstack(data, ssl) |
| #endif |
| |
| static CURLcode ossl_check_issuer(struct Curl_cfilter *cf, |
| struct Curl_easy *data, |
| X509 *server_cert) |
| { |
| struct ssl_primary_config *conn_config = Curl_ssl_cf_get_primary_config(cf); |
| X509 *issuer = NULL; |
| BIO *fp = NULL; |
| char err_buf[256] = ""; |
| bool verify_enabled = (conn_config->verifypeer || conn_config->verifyhost); |
| CURLcode result = CURLE_OK; |
| |
| /* e.g. match issuer name with provided issuer certificate */ |
| if(conn_config->issuercert_blob) { |
| fp = BIO_new_mem_buf(conn_config->issuercert_blob->data, |
| (int)conn_config->issuercert_blob->len); |
| if(!fp) { |
| failf(data, "BIO_new_mem_buf NULL, " OSSL_PACKAGE " error %s", |
| ossl_strerror(ERR_get_error(), err_buf, sizeof(err_buf))); |
| result = CURLE_OUT_OF_MEMORY; |
| goto out; |
| } |
| } |
| else if(conn_config->issuercert) { |
| fp = BIO_new(BIO_s_file()); |
| if(!fp) { |
| failf(data, "BIO_new return NULL, " OSSL_PACKAGE " error %s", |
| ossl_strerror(ERR_get_error(), err_buf, sizeof(err_buf))); |
| result = CURLE_OUT_OF_MEMORY; |
| goto out; |
| } |
| |
| if(BIO_read_filename(fp, conn_config->issuercert) <= 0) { |
| if(verify_enabled) |
| failf(data, "SSL: Unable to open issuer cert (%s)", |
| conn_config->issuercert); |
| result = CURLE_SSL_ISSUER_ERROR; |
| goto out; |
| } |
| } |
| |
| if(fp) { |
| issuer = PEM_read_bio_X509(fp, NULL, ZERO_NULL, NULL); |
| if(!issuer) { |
| if(verify_enabled) |
| failf(data, "SSL: Unable to read issuer cert (%s)", |
| conn_config->issuercert); |
| result = CURLE_SSL_ISSUER_ERROR; |
| goto out; |
| } |
| |
| if(X509_check_issued(issuer, server_cert) != X509_V_OK) { |
| if(verify_enabled) |
| failf(data, "SSL: Certificate issuer check failed (%s)", |
| conn_config->issuercert); |
| result = CURLE_SSL_ISSUER_ERROR; |
| goto out; |
| } |
| |
| infof(data, " SSL certificate issuer check ok (%s)", |
| conn_config->issuercert); |
| } |
| |
| out: |
| if(fp) |
| BIO_free(fp); |
| if(issuer) |
| X509_free(issuer); |
| return result; |
| } |
| |
| static CURLcode ossl_check_pinned_key(struct Curl_cfilter *cf, |
| struct Curl_easy *data, |
| X509 *server_cert) |
| { |
| const char *ptr; |
| CURLcode result = CURLE_OK; |
| |
| (void)cf; |
| #ifndef CURL_DISABLE_PROXY |
| ptr = Curl_ssl_cf_is_proxy(cf) ? |
| data->set.str[STRING_SSL_PINNEDPUBLICKEY_PROXY] : |
| data->set.str[STRING_SSL_PINNEDPUBLICKEY]; |
| #else |
| ptr = data->set.str[STRING_SSL_PINNEDPUBLICKEY]; |
| #endif |
| if(ptr) { |
| result = ossl_pkp_pin_peer_pubkey(data, server_cert, ptr); |
| if(result) |
| failf(data, "SSL: public key does not match pinned public key"); |
| } |
| return result; |
| } |
| |
| #ifndef CURL_DISABLE_VERBOSE_STRINGS |
| #define MAX_CERT_NAME_LENGTH 2048 |
| static CURLcode ossl_infof_cert(struct Curl_cfilter *cf, |
| struct Curl_easy *data, |
| X509 *server_cert) |
| { |
| BIO *mem = NULL; |
| struct dynbuf dname; |
| char err_buf[256] = ""; |
| char *buf; |
| long len; |
| CURLcode result = CURLE_OK; |
| |
| if(!Curl_trc_is_verbose(data)) |
| return CURLE_OK; |
| |
| curlx_dyn_init(&dname, MAX_CERT_NAME_LENGTH); |
| mem = BIO_new(BIO_s_mem()); |
| if(!mem) { |
| failf(data, "BIO_new return NULL, " OSSL_PACKAGE " error %s", |
| ossl_strerror(ERR_get_error(), err_buf, sizeof(err_buf))); |
| result = CURLE_OUT_OF_MEMORY; |
| goto out; |
| } |
| |
| infof(data, "%s certificate:", Curl_ssl_cf_is_proxy(cf) ? |
| "Proxy" : "Server"); |
| |
| result = x509_name_oneline(X509_get_subject_name(server_cert), &dname); |
| infof(data, " subject: %s", result ? "[NONE]" : curlx_dyn_ptr(&dname)); |
| |
| ASN1_TIME_print(mem, X509_get0_notBefore(server_cert)); |
| len = BIO_get_mem_data(mem, (char **)&buf); |
| infof(data, " start date: %.*s", (int)len, buf); |
| (void)BIO_reset(mem); |
| |
| ASN1_TIME_print(mem, X509_get0_notAfter(server_cert)); |
| len = BIO_get_mem_data(mem, (char **)&buf); |
| infof(data, " expire date: %.*s", (int)len, buf); |
| (void)BIO_reset(mem); |
| |
| result = x509_name_oneline(X509_get_issuer_name(server_cert), &dname); |
| if(result) /* should be only fatal stuff like OOM */ |
| goto out; |
| infof(data, " issuer: %s", curlx_dyn_ptr(&dname)); |
| |
| out: |
| BIO_free(mem); |
| curlx_dyn_free(&dname); |
| return result; |
| } |
| #endif /* !CURL_DISABLE_VERBOSE_STRINGS */ |
| |
| #ifdef USE_APPLE_SECTRUST |
| struct ossl_certs_ctx { |
| STACK_OF(X509) *sk; |
| size_t num_certs; |
| }; |
| |
| static CURLcode ossl_chain_get_der(struct Curl_cfilter *cf, |
| struct Curl_easy *data, |
| void *user_data, |
| size_t i, |
| unsigned char **pder, |
| size_t *pder_len) |
| { |
| struct ossl_certs_ctx *chain = user_data; |
| X509 *cert; |
| int der_len; |
| |
| (void)cf; |
| (void)data; |
| *pder_len = 0; |
| *pder = NULL; |
| |
| if(i >= chain->num_certs) |
| return CURLE_TOO_LARGE; |
| cert = sk_X509_value(chain->sk, (int)i); |
| if(!cert) |
| return CURLE_FAILED_INIT; |
| der_len = i2d_X509(cert, pder); |
| if(der_len < 0) |
| return CURLE_FAILED_INIT; |
| *pder_len = (size_t)der_len; |
| return CURLE_OK; |
| } |
| |
| static CURLcode ossl_apple_verify(struct Curl_cfilter *cf, |
| struct Curl_easy *data, |
| struct ossl_ctx *octx, |
| struct ssl_peer *peer, |
| bool *pverified) |
| { |
| struct ssl_primary_config *conn_config = Curl_ssl_cf_get_primary_config(cf); |
| struct ossl_certs_ctx chain; |
| CURLcode result; |
| |
| memset(&chain, 0, sizeof(chain)); |
| chain.sk = SSL_get_peer_cert_chain(octx->ssl); |
| chain.num_certs = chain.sk ? sk_X509_num(chain.sk) : 0; |
| |
| if(!chain.num_certs && |
| (conn_config->verifypeer || conn_config->verifyhost)) { |
| failf(data, "SSL: could not get peer certificate"); |
| result = CURLE_PEER_FAILED_VERIFICATION; |
| } |
| else { |
| #ifdef HAVE_BORINGSSL_LIKE |
| const uint8_t *ocsp_data = NULL; |
| #else |
| unsigned char *ocsp_data = NULL; |
| #endif |
| long ocsp_len = 0; |
| if(conn_config->verifystatus && !octx->reused_session) |
| ocsp_len = (long)SSL_get_tlsext_status_ocsp_resp(octx->ssl, &ocsp_data); |
| |
| /* SSL_get_tlsext_status_ocsp_resp() returns the length of the OCSP |
| response data or -1 if there is no OCSP response data. */ |
| if(ocsp_len < 0) |
| ocsp_len = 0; /* no data available */ |
| result = Curl_vtls_apple_verify(cf, data, peer, chain.num_certs, |
| ossl_chain_get_der, &chain, |
| ocsp_data, ocsp_len); |
| } |
| *pverified = !result; |
| return result; |
| } |
| #endif /* USE_APPLE_SECTRUST */ |
| |
| CURLcode Curl_ossl_check_peer_cert(struct Curl_cfilter *cf, |
| struct Curl_easy *data, |
| struct ossl_ctx *octx, |
| struct ssl_peer *peer) |
| { |
| struct connectdata *conn = cf->conn; |
| struct ssl_config_data *ssl_config = Curl_ssl_cf_get_config(cf, data); |
| struct ssl_primary_config *conn_config = Curl_ssl_cf_get_primary_config(cf); |
| CURLcode result = CURLE_OK; |
| long ossl_verify; |
| X509 *server_cert; |
| bool verified = FALSE; |
| #if !defined(OPENSSL_NO_OCSP) && defined(USE_APPLE_SECTRUST) |
| bool sectrust_verified = FALSE; |
| #endif |
| |
| if(data->set.ssl.certinfo && !octx->reused_session) { |
| /* asked to gather certificate info. Reused sessions do not have cert |
| chains */ |
| result = ossl_certchain(data, octx->ssl); |
| if(result) |
| return result; |
| } |
| |
| server_cert = SSL_get1_peer_certificate(octx->ssl); |
| if(!server_cert) { |
| /* no verification at all, this maybe acceptable */ |
| if(!(conn_config->verifypeer || conn_config->verifyhost)) |
| goto out; |
| |
| failf(data, "SSL: could not get peer certificate"); |
| result = CURLE_PEER_FAILED_VERIFICATION; |
| goto out; |
| } |
| |
| #ifndef CURL_DISABLE_VERBOSE_STRINGS |
| result = ossl_infof_cert(cf, data, server_cert); |
| if(result) |
| goto out; |
| infof_certstack(data, octx->ssl); |
| #endif |
| |
| if(conn_config->verifyhost) { |
| result = ossl_verifyhost(data, conn, peer, server_cert); |
| if(result) |
| goto out; |
| } |
| /* `verifyhost` is either OK or not requested from here on */ |
| |
| ossl_verify = SSL_get_verify_result(octx->ssl); |
| ssl_config->certverifyresult = ossl_verify; |
| |
| verified = (ossl_verify == X509_V_OK); |
| if(verified) |
| infof(data, "SSL certificate verified via OpenSSL."); |
| |
| #ifdef USE_APPLE_SECTRUST |
| if(!verified && conn_config->verifypeer && ssl_config->native_ca_store) { |
| /* we verify using Apple SecTrust *unless* OpenSSL already verified. |
| * This may happen if the application intercepted the OpenSSL callback |
| * and installed its own. */ |
| result = ossl_apple_verify(cf, data, octx, peer, &verified); |
| if(result && (result != CURLE_PEER_FAILED_VERIFICATION)) |
| goto out; /* unexpected error */ |
| if(verified) { |
| infof(data, "SSL certificate verified via Apple SecTrust."); |
| ssl_config->certverifyresult = X509_V_OK; |
| #ifndef OPENSSL_NO_OCSP |
| sectrust_verified = TRUE; |
| #endif |
| } |
| } |
| #endif |
| |
| if(!verified) { |
| /* no trust established, report the OpenSSL status */ |
| if(conn_config->verifypeer) { |
| failf(data, "SSL certificate OpenSSL verify result: %s (%ld)", |
| X509_verify_cert_error_string(ossl_verify), ossl_verify); |
| result = CURLE_PEER_FAILED_VERIFICATION; |
| goto out; |
| } |
| infof(data, " SSL certificate verification failed, continuing anyway!"); |
| } |
| |
| #ifndef OPENSSL_NO_OCSP |
| if(conn_config->verifystatus && |
| #ifdef USE_APPLE_SECTRUST |
| !sectrust_verified && /* already verified via apple sectrust, cannot |
| * verifystate via OpenSSL in that case as it |
| * does not have the trust anchors */ |
| #endif |
| !octx->reused_session) { |
| /* do not do this after Session ID reuse */ |
| result = verifystatus(cf, data, octx); |
| if(result) |
| goto out; |
| } |
| #endif |
| |
| result = ossl_check_issuer(cf, data, server_cert); |
| if(result) |
| goto out; |
| |
| result = ossl_check_pinned_key(cf, data, server_cert); |
| |
| out: |
| X509_free(server_cert); |
| return result; |
| } |
| |
| static CURLcode ossl_connect_step3(struct Curl_cfilter *cf, |
| struct Curl_easy *data) |
| { |
| CURLcode result = CURLE_OK; |
| struct ssl_connect_data *connssl = cf->ctx; |
| struct ossl_ctx *octx = (struct ossl_ctx *)connssl->backend; |
| |
| DEBUGASSERT(ssl_connect_3 == connssl->connecting_state); |
| |
| /* |
| * We check certificates to authenticate the server; otherwise we risk |
| * man-in-the-middle attack; NEVERTHELESS, if we are told explicitly not to |
| * verify the peer, ignore faults and failures from the server cert |
| * operations. |
| */ |
| |
| result = Curl_ossl_check_peer_cert(cf, data, octx, &connssl->peer); |
| if(result) |
| /* on error, remove sessions we might have in the pool */ |
| Curl_ssl_scache_remove_all(cf, data, connssl->peer.scache_key); |
| |
| return result; |
| } |
| |
| #ifdef HAVE_OPENSSL_EARLYDATA |
| static CURLcode ossl_send_earlydata(struct Curl_cfilter *cf, |
| struct Curl_easy *data) |
| { |
| struct ssl_connect_data *connssl = cf->ctx; |
| struct ossl_ctx *octx = (struct ossl_ctx *)connssl->backend; |
| CURLcode result = CURLE_OK; |
| const unsigned char *buf; |
| size_t blen, nwritten; |
| int rc; |
| |
| DEBUGASSERT(connssl->earlydata_state == ssl_earlydata_sending); |
| octx->io_result = CURLE_OK; |
| while(Curl_bufq_peek(&connssl->earlydata, &buf, &blen)) { |
| nwritten = 0; |
| rc = SSL_write_early_data(octx->ssl, buf, blen, &nwritten); |
| CURL_TRC_CF(data, cf, "SSL_write_early_data(len=%zu) -> %d, %zu", |
| blen, rc, nwritten); |
| if(rc <= 0) { |
| long sslerror; |
| char error_buffer[256]; |
| int err = SSL_get_error(octx->ssl, rc); |
| |
| switch(err) { |
| case SSL_ERROR_WANT_READ: |
| connssl->io_need = CURL_SSL_IO_NEED_RECV; |
| result = CURLE_AGAIN; |
| goto out; |
| case SSL_ERROR_WANT_WRITE: |
| connssl->io_need = CURL_SSL_IO_NEED_SEND; |
| result = CURLE_AGAIN; |
| goto out; |
| case SSL_ERROR_SYSCALL: { |
| int sockerr = SOCKERRNO; |
| |
| if(octx->io_result == CURLE_AGAIN) { |
| result = CURLE_AGAIN; |
| goto out; |
| } |
| sslerror = ERR_get_error(); |
| if(sslerror) |
| ossl_strerror(sslerror, error_buffer, sizeof(error_buffer)); |
| else if(sockerr) |
| curlx_strerror(sockerr, error_buffer, sizeof(error_buffer)); |
| else |
| curl_msnprintf(error_buffer, sizeof(error_buffer), "%s", |
| SSL_ERROR_to_str(err)); |
| |
| failf(data, OSSL_PACKAGE " SSL_write:early_data: %s, errno %d", |
| error_buffer, sockerr); |
| result = CURLE_SEND_ERROR; |
| goto out; |
| } |
| case SSL_ERROR_SSL: { |
| /* A failure in the SSL library occurred, usually a protocol error. |
| The OpenSSL error queue contains more information on the error. */ |
| sslerror = ERR_get_error(); |
| failf(data, "SSL_write_early_data() error: %s", |
| ossl_strerror(sslerror, error_buffer, sizeof(error_buffer))); |
| result = CURLE_SEND_ERROR; |
| goto out; |
| } |
| default: |
| /* a true error */ |
| failf(data, OSSL_PACKAGE " SSL_write_early_data: %s, errno %d", |
| SSL_ERROR_to_str(err), SOCKERRNO); |
| result = CURLE_SEND_ERROR; |
| goto out; |
| } |
| } |
| Curl_bufq_skip(&connssl->earlydata, nwritten); |
| } |
| /* sent everything there was */ |
| infof(data, "SSL sending %zu bytes of early data", connssl->earlydata_skip); |
| out: |
| return result; |
| } |
| #endif /* HAVE_OPENSSL_EARLYDATA */ |
| |
| static CURLcode ossl_connect(struct Curl_cfilter *cf, |
| struct Curl_easy *data, |
| bool *done) |
| { |
| CURLcode result = CURLE_OK; |
| struct ssl_connect_data *connssl = cf->ctx; |
| |
| /* check if the connection has already been established */ |
| if(ssl_connection_complete == connssl->state) { |
| *done = TRUE; |
| return CURLE_OK; |
| } |
| |
| *done = FALSE; |
| connssl->io_need = CURL_SSL_IO_NEED_NONE; |
| |
| if(ssl_connect_1 == connssl->connecting_state) { |
| CURL_TRC_CF(data, cf, "ossl_connect, step1"); |
| result = ossl_connect_step1(cf, data); |
| if(result) |
| goto out; |
| } |
| |
| if(ssl_connect_2 == connssl->connecting_state) { |
| CURL_TRC_CF(data, cf, "ossl_connect, step2"); |
| #ifdef HAVE_OPENSSL_EARLYDATA |
| if(connssl->earlydata_state == ssl_earlydata_await) { |
| goto out; |
| } |
| else if(connssl->earlydata_state == ssl_earlydata_sending) { |
| result = ossl_send_earlydata(cf, data); |
| if(result) |
| goto out; |
| connssl->earlydata_state = ssl_earlydata_sent; |
| } |
| #endif |
| DEBUGASSERT((connssl->earlydata_state == ssl_earlydata_none) || |
| (connssl->earlydata_state == ssl_earlydata_sent)); |
| |
| result = ossl_connect_step2(cf, data); |
| if(result) |
| goto out; |
| } |
| |
| if(ssl_connect_3 == connssl->connecting_state) { |
| CURL_TRC_CF(data, cf, "ossl_connect, step3"); |
| result = ossl_connect_step3(cf, data); |
| if(result) |
| goto out; |
| connssl->connecting_state = ssl_connect_done; |
| #ifdef HAVE_OPENSSL_EARLYDATA |
| if(connssl->earlydata_state > ssl_earlydata_none) { |
| struct ossl_ctx *octx = (struct ossl_ctx *)connssl->backend; |
| /* We should be in this state by now */ |
| DEBUGASSERT(connssl->earlydata_state == ssl_earlydata_sent); |
| connssl->earlydata_state = |
| (SSL_get_early_data_status(octx->ssl) == SSL_EARLY_DATA_ACCEPTED) ? |
| ssl_earlydata_accepted : ssl_earlydata_rejected; |
| } |
| #endif |
| } |
| |
| if(ssl_connect_done == connssl->connecting_state) { |
| CURL_TRC_CF(data, cf, "ossl_connect, done"); |
| connssl->state = ssl_connection_complete; |
| } |
| |
| out: |
| if(result == CURLE_AGAIN) { |
| *done = FALSE; |
| return CURLE_OK; |
| } |
| *done = ((connssl->state == ssl_connection_complete) || |
| (connssl->state == ssl_connection_deferred)); |
| return result; |
| } |
| |
| static bool ossl_data_pending(struct Curl_cfilter *cf, |
| const struct Curl_easy *data) |
| { |
| struct ssl_connect_data *connssl = cf->ctx; |
| (void)data; |
| return connssl->input_pending; |
| } |
| |
| static CURLcode ossl_send(struct Curl_cfilter *cf, |
| struct Curl_easy *data, |
| const void *mem, |
| size_t len, |
| size_t *pnwritten) |
| { |
| /* SSL_write() is said to return 'int' while write() and send() returns |
| 'size_t' */ |
| int err; |
| char error_buffer[256]; |
| sslerr_t sslerror; |
| int memlen; |
| struct ssl_connect_data *connssl = cf->ctx; |
| struct ossl_ctx *octx = (struct ossl_ctx *)connssl->backend; |
| CURLcode result = CURLE_OK; |
| int nwritten; |
| |
| (void)data; |
| DEBUGASSERT(octx); |
| *pnwritten = 0; |
| ERR_clear_error(); |
| |
| connssl->io_need = CURL_SSL_IO_NEED_NONE; |
| memlen = (len > (size_t)INT_MAX) ? INT_MAX : (int)len; |
| if(octx->blocked_ssl_write_len && (octx->blocked_ssl_write_len != memlen)) { |
| /* The previous SSL_write() call was blocked, using that length. |
| * We need to use that again or OpenSSL will freak out. A shorter |
| * length should not happen and is a bug in libcurl. */ |
| if(octx->blocked_ssl_write_len > memlen) { |
| DEBUGASSERT(0); |
| return CURLE_BAD_FUNCTION_ARGUMENT; |
| } |
| memlen = octx->blocked_ssl_write_len; |
| } |
| octx->blocked_ssl_write_len = 0; |
| nwritten = SSL_write(octx->ssl, mem, memlen); |
| |
| if(nwritten > 0) |
| *pnwritten = (size_t)nwritten; |
| else { |
| err = SSL_get_error(octx->ssl, nwritten); |
| |
| switch(err) { |
| case SSL_ERROR_WANT_READ: |
| connssl->io_need = CURL_SSL_IO_NEED_RECV; |
| octx->blocked_ssl_write_len = memlen; |
| result = CURLE_AGAIN; |
| goto out; |
| case SSL_ERROR_WANT_WRITE: |
| result = CURLE_AGAIN; |
| octx->blocked_ssl_write_len = memlen; |
| goto out; |
| case SSL_ERROR_SYSCALL: { |
| int sockerr = SOCKERRNO; |
| |
| if(octx->io_result == CURLE_AGAIN) { |
| octx->blocked_ssl_write_len = memlen; |
| result = CURLE_AGAIN; |
| goto out; |
| } |
| sslerror = ERR_get_error(); |
| if(sslerror) |
| ossl_strerror(sslerror, error_buffer, sizeof(error_buffer)); |
| else if(sockerr) |
| curlx_strerror(sockerr, error_buffer, sizeof(error_buffer)); |
| else |
| curl_msnprintf(error_buffer, sizeof(error_buffer), "%s", |
| SSL_ERROR_to_str(err)); |
| |
| failf(data, OSSL_PACKAGE " SSL_write: %s, errno %d", |
| error_buffer, sockerr); |
| result = CURLE_SEND_ERROR; |
| goto out; |
| } |
| case SSL_ERROR_SSL: { |
| /* A failure in the SSL library occurred, usually a protocol error. |
| The OpenSSL error queue contains more information on the error. */ |
| sslerror = ERR_get_error(); |
| failf(data, "SSL_write() error: %s", |
| ossl_strerror(sslerror, error_buffer, sizeof(error_buffer))); |
| result = CURLE_SEND_ERROR; |
| goto out; |
| } |
| default: |
| /* a true error */ |
| failf(data, OSSL_PACKAGE " SSL_write: %s, errno %d", |
| SSL_ERROR_to_str(err), SOCKERRNO); |
| result = CURLE_SEND_ERROR; |
| goto out; |
| } |
| } |
| |
| out: |
| return result; |
| } |
| |
| static CURLcode ossl_recv(struct Curl_cfilter *cf, |
| struct Curl_easy *data, /* transfer */ |
| char *buf, /* store read data here */ |
| size_t buffersize, /* max amount to read */ |
| size_t *pnread) |
| { |
| char error_buffer[256]; |
| unsigned long sslerror; |
| int buffsize; |
| struct ssl_connect_data *connssl = cf->ctx; |
| struct ossl_ctx *octx = (struct ossl_ctx *)connssl->backend; |
| CURLcode result = CURLE_OK; |
| int nread; |
| |
| (void)data; |
| DEBUGASSERT(octx); |
| |
| *pnread = 0; |
| ERR_clear_error(); |
| |
| connssl->io_need = CURL_SSL_IO_NEED_NONE; |
| buffsize = (buffersize > (size_t)INT_MAX) ? INT_MAX : (int)buffersize; |
| nread = SSL_read(octx->ssl, buf, buffsize); |
| |
| if(nread > 0) |
| *pnread = (size_t)nread; |
| else { |
| /* failed SSL_read */ |
| int err = SSL_get_error(octx->ssl, (int)nread); |
| |
| switch(err) { |
| case SSL_ERROR_NONE: /* this is not an error */ |
| break; |
| case SSL_ERROR_ZERO_RETURN: /* no more data */ |
| /* close_notify alert */ |
| if(cf->sockindex == FIRSTSOCKET) |
| /* mark the connection for close if it is indeed the control |
| connection */ |
| CURL_TRC_CF(data, cf, "TLS close_notify"); |
| break; |
| case SSL_ERROR_WANT_READ: |
| connssl->io_need = CURL_SSL_IO_NEED_RECV; |
| result = CURLE_AGAIN; |
| goto out; |
| case SSL_ERROR_WANT_WRITE: |
| connssl->io_need = CURL_SSL_IO_NEED_SEND; |
| result = CURLE_AGAIN; |
| goto out; |
| default: |
| /* openssl/ssl.h for SSL_ERROR_SYSCALL says "look at error stack/return |
| value/errno" */ |
| /* https://docs.openssl.org/master/man3/ERR_get_error/ */ |
| if(octx->io_result == CURLE_AGAIN) { |
| result = CURLE_AGAIN; |
| goto out; |
| } |
| sslerror = ERR_get_error(); |
| if((nread < 0) || sslerror) { |
| /* If the return code was negative or there actually is an error in the |
| queue */ |
| int sockerr = SOCKERRNO; |
| if(sslerror) |
| ossl_strerror(sslerror, error_buffer, sizeof(error_buffer)); |
| else if(sockerr && err == SSL_ERROR_SYSCALL) |
| curlx_strerror(sockerr, error_buffer, sizeof(error_buffer)); |
| else |
| curl_msnprintf(error_buffer, sizeof(error_buffer), "%s", |
| SSL_ERROR_to_str(err)); |
| failf(data, OSSL_PACKAGE " SSL_read: %s, errno %d", |
| error_buffer, sockerr); |
| result = CURLE_RECV_ERROR; |
| goto out; |
| } |
| else if(err == SSL_ERROR_SYSCALL) { |
| if(octx->io_result) { |
| /* logging handling in underlying filter already */ |
| result = octx->io_result; |
| } |
| else if(connssl->peer_closed) { |
| failf(data, "Connection closed abruptly"); |
| result = CURLE_RECV_ERROR; |
| } |
| else { |
| /* We should no longer get here nowadays. But handle |
| * the error in case of some weirdness in the OSSL stack */ |
| int sockerr = SOCKERRNO; |
| if(sockerr) |
| curlx_strerror(sockerr, error_buffer, sizeof(error_buffer)); |
| else { |
| curl_msnprintf(error_buffer, sizeof(error_buffer), |
| "Connection closed abruptly"); |
| } |
| failf(data, OSSL_PACKAGE " SSL_read: %s, errno %d", |
| error_buffer, sockerr); |
| result = CURLE_RECV_ERROR; |
| } |
| goto out; |
| } |
| } |
| } |
| |
| out: |
| if((!result && !*pnread) || (result == CURLE_AGAIN)) { |
| /* This happens when: |
| * - we read an EOF |
| * - OpenSSLs buffers are empty, there is no more data |
| * - OpenSSL read is blocked on writing something first |
| * - an incomplete TLS packet is buffered that cannot be read |
| * until more data arrives */ |
| connssl->input_pending = FALSE; |
| } |
| CURL_TRC_CF(data, cf, "ossl_recv(len=%zu) -> %d, %zu (in_pending=%d)", |
| buffersize, result, *pnread, connssl->input_pending); |
| return result; |
| } |
| |
| static CURLcode ossl_get_channel_binding(struct Curl_easy *data, int sockindex, |
| struct dynbuf *binding) |
| { |
| X509 *cert; |
| int algo_nid; |
| const EVP_MD *algo_type; |
| const char *algo_name; |
| unsigned int length; |
| unsigned char buf[EVP_MAX_MD_SIZE]; |
| |
| const char prefix[] = "tls-server-end-point:"; |
| struct connectdata *conn = data->conn; |
| struct Curl_cfilter *cf = conn->cfilter[sockindex]; |
| struct ossl_ctx *octx = NULL; |
| CURLcode result = CURLE_OK; |
| |
| do { |
| const struct Curl_cftype *cft = cf->cft; |
| struct ssl_connect_data *connssl = cf->ctx; |
| |
| if(cft->name && !strcmp(cft->name, "SSL")) { |
| octx = (struct ossl_ctx *)connssl->backend; |
| break; |
| } |
| |
| cf = cf->next; |
| } while(cf); |
| |
| if(!octx) { |
| failf(data, "Failed to find the SSL filter"); |
| return CURLE_BAD_FUNCTION_ARGUMENT; |
| } |
| |
| cert = SSL_get1_peer_certificate(octx->ssl); |
| if(!cert) |
| /* No server certificate, do not do channel binding */ |
| return CURLE_OK; |
| |
| if(!OBJ_find_sigid_algs(X509_get_signature_nid(cert), &algo_nid, NULL)) { |
| failf(data, |
| "Unable to find digest NID for certificate signature algorithm"); |
| result = CURLE_SSL_INVALIDCERTSTATUS; |
| goto error; |
| } |
| |
| /* https://datatracker.ietf.org/doc/html/rfc5929#section-4.1 */ |
| if(algo_nid == NID_md5 || algo_nid == NID_sha1) { |
| algo_type = EVP_sha256(); |
| } |
| else { |
| algo_type = EVP_get_digestbynid(algo_nid); |
| if(!algo_type) { |
| algo_name = OBJ_nid2sn(algo_nid); |
| failf(data, "Could not find digest algorithm %s (NID %d)", |
| algo_name ? algo_name : "(null)", algo_nid); |
| result = CURLE_SSL_INVALIDCERTSTATUS; |
| goto error; |
| } |
| } |
| |
| if(!X509_digest(cert, algo_type, buf, &length)) { |
| failf(data, "X509_digest() failed"); |
| result = CURLE_SSL_INVALIDCERTSTATUS; |
| goto error; |
| } |
| |
| /* Append "tls-server-end-point:" */ |
| result = curlx_dyn_addn(binding, prefix, sizeof(prefix) - 1); |
| if(result) |
| goto error; |
| |
| /* Append digest */ |
| result = curlx_dyn_addn(binding, buf, length); |
| |
| error: |
| X509_free(cert); |
| return result; |
| } |
| |
| size_t Curl_ossl_version(char *buffer, size_t size) |
| { |
| #ifdef LIBRESSL_VERSION_NUMBER |
| char *p; |
| size_t count; |
| const char *ver = OpenSSL_version(OPENSSL_VERSION); |
| const char expected[] = OSSL_PACKAGE " "; /* ie "LibreSSL " */ |
| if(curl_strnequal(ver, expected, sizeof(expected) - 1)) { |
| ver += sizeof(expected) - 1; |
| } |
| count = curl_msnprintf(buffer, size, "%s/%s", OSSL_PACKAGE, ver); |
| for(p = buffer; *p; ++p) { |
| if(ISBLANK(*p)) |
| *p = '_'; |
| } |
| return count; |
| #elif defined(OPENSSL_IS_BORINGSSL) |
| #ifdef CURL_BORINGSSL_VERSION |
| return curl_msnprintf(buffer, size, "%s/%s", |
| OSSL_PACKAGE, CURL_BORINGSSL_VERSION); |
| #else |
| return curl_msnprintf(buffer, size, OSSL_PACKAGE); |
| #endif |
| #elif defined(OPENSSL_IS_AWSLC) |
| return curl_msnprintf(buffer, size, "%s/%s", |
| OSSL_PACKAGE, AWSLC_VERSION_NUMBER_STRING); |
| #else /* OpenSSL 3+ */ |
| return curl_msnprintf(buffer, size, "%s/%s", |
| OSSL_PACKAGE, OpenSSL_version(OPENSSL_VERSION_STRING)); |
| #endif |
| } |
| |
| /* can be called with data == NULL */ |
| static CURLcode ossl_random(struct Curl_easy *data, |
| unsigned char *entropy, size_t length) |
| { |
| int rc; |
| if(data) { |
| if(ossl_seed(data)) /* Initiate the seed if not already done */ |
| return CURLE_FAILED_INIT; /* could not seed for some reason */ |
| } |
| else { |
| if(!rand_enough()) |
| return CURLE_FAILED_INIT; |
| } |
| /* RAND_bytes() returns 1 on success, 0 otherwise. */ |
| rc = RAND_bytes(entropy, (ossl_valsize_t)curlx_uztosi(length)); |
| return rc == 1 ? CURLE_OK : CURLE_FAILED_INIT; |
| } |
| |
| static CURLcode ossl_sha256sum(const unsigned char *tmp, /* input */ |
| size_t tmplen, |
| unsigned char *sha256sum /* output */, |
| size_t unused) |
| { |
| EVP_MD_CTX *mdctx; |
| unsigned int len = 0; |
| (void)unused; |
| |
| mdctx = EVP_MD_CTX_create(); |
| if(!mdctx) |
| return CURLE_OUT_OF_MEMORY; |
| if(!EVP_DigestInit(mdctx, EVP_sha256())) { |
| EVP_MD_CTX_destroy(mdctx); |
| return CURLE_FAILED_INIT; |
| } |
| EVP_DigestUpdate(mdctx, tmp, tmplen); |
| EVP_DigestFinal_ex(mdctx, sha256sum, &len); |
| EVP_MD_CTX_destroy(mdctx); |
| return CURLE_OK; |
| } |
| |
| static bool ossl_cert_status_request(void) |
| { |
| #ifndef OPENSSL_NO_OCSP |
| return TRUE; |
| #else |
| return FALSE; |
| #endif |
| } |
| |
| static void *ossl_get_internals(struct ssl_connect_data *connssl, |
| CURLINFO info) |
| { |
| /* Legacy: CURLINFO_TLS_SESSION must return an SSL_CTX pointer. */ |
| struct ossl_ctx *octx = (struct ossl_ctx *)connssl->backend; |
| DEBUGASSERT(octx); |
| return info == CURLINFO_TLS_SESSION ? |
| (void *)octx->ssl_ctx : (void *)octx->ssl; |
| } |
| |
| const struct Curl_ssl Curl_ssl_openssl = { |
| { CURLSSLBACKEND_OPENSSL, "openssl" }, /* info */ |
| |
| SSLSUPP_CA_PATH | |
| SSLSUPP_CAINFO_BLOB | |
| SSLSUPP_CERTINFO | |
| SSLSUPP_PINNEDPUBKEY | |
| SSLSUPP_SSL_CTX | |
| #ifdef HAVE_SSL_CTX_SET_CIPHERSUITES |
| SSLSUPP_TLS13_CIPHERSUITES | |
| #endif |
| #ifdef HAVE_SSL_CTX_SET1_SIGALGS |
| SSLSUPP_SIGNATURE_ALGORITHMS | |
| #endif |
| #ifdef HAVE_SSL_SET1_ECH_CONFIG_LIST |
| SSLSUPP_ECH | |
| #endif |
| SSLSUPP_CA_CACHE | |
| SSLSUPP_HTTPS_PROXY | |
| SSLSUPP_CIPHER_LIST, |
| |
| sizeof(struct ossl_ctx), |
| |
| ossl_init, /* init */ |
| ossl_cleanup, /* cleanup */ |
| Curl_ossl_version, /* version */ |
| ossl_shutdown, /* shutdown */ |
| ossl_data_pending, /* data_pending */ |
| ossl_random, /* random */ |
| ossl_cert_status_request, /* cert_status_request */ |
| ossl_connect, /* connect */ |
| Curl_ssl_adjust_pollset, /* adjust_pollset */ |
| ossl_get_internals, /* get_internals */ |
| ossl_close, /* close_one */ |
| ossl_close_all, /* close_all */ |
| ossl_set_engine, /* set_engine or provider */ |
| ossl_set_engine_default, /* set_engine_default */ |
| ossl_engines_list, /* engines_list */ |
| ossl_sha256sum, /* sha256sum */ |
| ossl_recv, /* recv decrypted data */ |
| ossl_send, /* send data to encrypt */ |
| ossl_get_channel_binding /* get_channel_binding */ |
| }; |
| |
| #endif /* USE_OPENSSL */ |