cezanne/Cezanne Vbios Release Notes.txt

============================ Cezanne 021 VBIOS release ========================================
Cezanne generic Baseline VBIOS 021
Cezanne A0 0x1638 105_D27000_00A  CZNGenericVbios.021   02/23/22,06:21:16 2387390@17.10.0.31  ATOMBuild#603188

Major changes:
1. Set the DISPCLK/DPPCLK to max 700Mhz when vPOST init, it will not change again till enter OS driver loaded.

============================ Cezanne 020 VBIOS release ========================================
Cezanne generic Baseline VBIOS 020
Cezanne A0 0x1638 105_D27000_00A  CZNGenericVbios.020   11/25/21,23:17:28 2382100@17.10.0.30  ATOMBuild#595471

Major changes:
1. Enable USB-C capability as default on display path PHYD and PHYE

============================ Cezanne 019 VBIOS release ========================================
Cezanne generic Baseline VBIOS 019
Cezanne A0 0x1638 105_D27000_00A  CZNGenericVbios.019   09/24/21,11:21:10 2360689@17.10.0.30  ATOMBuild#586451

Major changes:
1. Disable USB-C capability as default on PHYD and PHYE

============================ Cezanne 018 VBIOS release ========================================
Cezanne generic Baseline VBIOS 018
Cezanne A0 0x1638 105_D27000_00A  CZNGenericVbios.018   02/28/21,08:58:46 2267626@17.10.0.29  ATOMBuild#554021

Major changes:
1. WA for DCN block Pstate change @SMU when set mode
2. Update rlc_gpu_timer_refclk to correct SW delay timer 

============================ Cezanne 017 VBIOS release ========================================
Cezanne generic Baseline VBIOS 017
Cezanne A0 0x1638 105_D27000_00A  CZNGenericVbios.017   11/13/20,02:11:10 2201120@17.10.0.28  ATOMBuild#540614

Major changes:
1. Add display connector caps record for driver to tell if external DFPx monitor set as "INTERNAL" display.

============================ Cezanne 016 VBIOS release ========================================
Cezanne generic Baseline VBIOS 016
Cezanne A0 0x1638 105_D27000_00A  CZNGenericVbios.016   09/11/20,04:55:20 2170377@17.10.0.27  ATOMBuild#531528

Major feature:
1. Update standard VESA mode table, Mode list and timing reviewed follow VESA DMT Version 1.0.13 released on  February 8, 2013

============================ Cezanne 015 VBIOS release ========================================
Cezanne generic Baseline VBIOS 015
Cezanne A0 0x1638 105_D27000_00A  CZNGenericVbios.015  08/24/20,06:11:57 2162078@17.10.0.26  ATOMBuild#528480

Major feature:
1. DISP CLK increase to max 700Mhz to support high pixel clock eDP.
2. PLAT-68663: Connceto to PEI GOP first than DXE GOP cause system hang

============================ Cezanne 014 VBIOS release ========================================
Cezanne generic Baseline VBIOS 014
Cezanne A0 0x1638 105_D27000_00A  CZNGenericVbios.014  08/16/20,22:43:14 2158707@17.10.0.25  ATOMBuild#527732

Major feature:
1. Update standard VESA mode table for optimized display mode functionality

============================ Cezanne 013 VBIOS release ========================================
Cezanne generic Baseline VBIOS 013
Cezanne A0 0x1638 105_D27000_00A  CZNGenericVbios.013  08/14/20,01:47:14 2158150@17.10.0.24  ATOMBuild#527574

Major feature:
1. Add new display PHY tuning items in integrated system info table V1_12

============================ Cezanne 012 VBIOS release ========================================
Cezanne generic Baseline VBIOS 012
Cezanne A0 0x1638 105_D27000_00A  CZNGenericVbios.012  08/04/20,04:17:23 2153049@17.10.0.23  ATOMBuild#525132

Major feature:
1. Due to build server problem, rebuilt generic VBIOS 011 to include the latest setting.

============================ Cezanne 011 VBIOS release ========================================
Cezanne generic Baseline VBIOS 011
Cezanne A0 0x1638 105_D27000_00A  CZNGenericVbios.011  07/27/20,02:39:12 2149991@17.10.0.23  ATOMBuild#524291

Major feature:
1. PLAT-66584 - DRTM enabled + GPU driver installed causes system to hang at POST logo screen with PC B00000CAD, Fail Rate 100%
   Setting HUBP_BLANK_EN = 0 on pipe that is not enabled will put pipe in undefined state.
2. PLAT-66156 - VGA monitor no display output after system reboot/S4/S5 when it's connected by type-c to VGA dongle
   ENABLE_DPHY_TX_RESET=0x1 enable DPPHY TX reset as on Renoir platfrom.


============================ Cezanne 010 VBIOS release ========================================
Cezanne generic Baseline VBIOS 010
Cezanne A0 0x1638 105_D27000_00A  CZNGenericVbios.010  07/16/20,22:44:43 2145705@17.10.0.22  ATOMBuild#523184

Major feature:
1. AUX pre-charge setting for CZN/Lucienne
   [IPSE]
   Please only update VBIOS for Cezanne and Lucienne and don’t touch Renoir (in production).
       AUX_TX_PRECHARGE_LEN = 0xD (updated)
       AUX_TX_PRECHARGE_LEN_MUL = 0 (updated)
       AUX_TX_OE_ASSERT_TIME = 1 (no change)
       AUX_TX_PRECHARGE_SYMBOLS = 0x1C (no change)
       AUX_MODE_DET_CHECK_DELAY = 2 (no change)
       AUXn_AUX_CTRL = 2 (added)
       AUXn_VOD_TUNE = 2 (added)
       
============================ Cezanne 009 VBIOS release ========================================
Cezanne generic Baseline VBIOS 009
Cezanne A0 0x1638 105_D27000_00A  CZNGenericVbios.009  07/01/20,02:03:02 2139194@17.10.0.21  ATOMBuild#520539

Major feature:
1. Support the eDP which pixel clock over 568Mhz.

============================ Cezanne 008 VBIOS release ========================================
Cezanne generic Baseline VBIOS 008
Cezanne A0 0x1638 105_D27000_00A  CZNGenericVbios.008  06/22/20,05:50:17 2135205@17.10.0.20  ATOMBuild#519746

Major feature:
1. Remove the bit "RDPCS_PHY_TEST_POWERDOWN" from CZN/LCN VBIOS, it needs re-load PHY FW for programming
   RDPCS_PHY_TEST_POWERDOWN from 1 to 0.
2. Update the LANEx_ANA_TX_LP_ATT setting to improve SI. 

============================ Cezanne 007 VBIOS release ========================================
Cezanne generic Baseline VBIOS 007
Cezanne A0 0x1638 105_D27000_00A  CZNGenericVbios.007  06/03/20,23:21:17 2126342@17.10.0.19  ATOMBuild#517791

Major feature:
1. New phy power down seq. apply on PhyA/B/C, usb-c combo-Phy works w/ old seq.

============================ Cezanne 006 VBIOS release ========================================
Cezanne generic Baseline VBIOS 006
Cezanne A0 0x1638 105_D27000_00A  CZNGenericVbios.006  05/29/20,05:15:40 2123598@17.10.0.19  ATOMBuild#517227

Major feature:
1. Implement new PHY MPLLb setting for DP and HDMI on CZN

============================ Cezanne 005 VBIOS release ========================================
Cezanne generic Baseline VBIOS 005
Cezanne A0 0x1638 105_D27000_00A  CZNGenericVbios.005  05/13/20,10:09:01 2114552@17.10.0.18  ATOMBuild#515566

Major feature:
1. Fix HDMI hotplug function abnormal in OS
2. Disable DPHY_TX_RESET

============================ Cezanne 004 VBIOS release ========================================
Cezanne generic Baseline VBIOS 004
Cezanne A0 0x1638 105_D27000_00A  CZNGenericVbios.004  05/11/20,13:23:11 2113274@17.10.0.17  ATOMBuild#515297

Major feature:
1. PLAT-63233 - Hangs in VBIOS when POST if boot w/ DP2HDMI dongle 
2. PLAT-63243 -System hang 0000217 when connect KVM, Failrate:5/5 
3. DIAG-7542 - can't be booted without connecting to the monitor

============================ Cezanne 003 VBIOS release ========================================
Cezanne generic Baseline VBIOS 003
Cezanne A0 0x1638 105_D27000_00A  CZNGenericVbios.003  04/27/20,05:16:46 2106505@17.10.0.16  ATOMBuild#511891

Major feature:
1. New PHY power down sequence for CZN

============================ Cezanne 002 VBIOS release ========================================
Cezanne generic Baseline VBIOS 002
Cezanne A0 0x1638 105_D27000_00A  CZNGenericVbios.002  03/04/20,09:04:39 2079353@17.10.0.15  ATOMBuild#503889

Major feature:
1. Sync up w/ the latest RN VBIOS 026


============================ Cezanne 001 VBIOS release ========================================
Cezanne generic Baseline VBIOS 001
Cezanne A0 0x1638 105_D27000_00A  CezanneGenericVbios.001  11/07/19,13:40:26 2026739@17.10.0.12  ATOMBuild#488889

Major feature:
1. First Cenaane protoype Vbios.