Add initial OWNERS, DIR_METADATA and README file

BUG=b:514716149
TEST=CQ

Change-Id: Ibbca816683ab962707174a55dd13c3aa80e83abd
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/platform/firmweaver/+/7878639
Commit-Queue: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Kshitij Shah <tij@google.com>
Tested-by: Karthik Ramasubramanian <kramasub@google.com>

DIR_METADATA

diff --git a/DIR_METADATA b/DIR_METADATA
new file mode 100644
index 0000000..49efcb9
--- /dev/null
+++ b/DIR_METADATA
@@ -0,0 +1,9 @@
+# Metadata information for this directory.
+# For the schema of this file, see Metadata message:
+#   https://source.chromium.org/chromium/infra/infra/+/main:go/src/infra/tools/dirmd/proto/dir_metadata.proto
+
+buganizer {
+  component_id: 874265  # ChromeOS > Platform > Hardware > Tools > Arbitrage
+}
+
+team_email: "arbitrage-eng@google.com"

OWNERS

diff --git a/OWNERS b/OWNERS
new file mode 100644
index 0000000..13accb4
--- /dev/null
+++ b/OWNERS
@@ -0,0 +1,3 @@
+# All AP and EC firmware team members can approve.
+include chromiumos/owners:v1:/firmware/OWNERS.cros_ap
+include chromiumos/owners:v1:/firmware/OWNERS.cros_ec

README.md

diff --git a/README.md b/README.md
new file mode 100644
index 0000000..f24b671
--- /dev/null
+++ b/README.md
@@ -0,0 +1,34 @@
+# Firmweaver
+
+Firmweaver is a collection of tools for Chromium OS to assist with initial
+firmware setup during board bringup.
+
+## Introduction
+
+The Chromium OS project includes tools to assist with initial firmware setup
+during board bringup. These tools generate certain objects in Application
+Processor (AP) and Embedded Controller (EC) firmware (e.g., EC devicetree,
+AP GPIO configuration, etc.).
+
+The tools take a curated sheet as prepared by the hardware team as an input and
+generate these objects as output. Developers can validate the generated output
+and contribute them to the concerned project.
+
+## Features
+
+*   **Automatic Generation**: Generates firmware objects from hardware sheets.
+*   **Supported Outputs**:
+    *   EC Devicetree
+    *   AP GPIO Configuration
+
+## Getting Started
+
+*(Add instructions on how to set up the environment and get started with Firmweaver.)*
+
+## Usage
+
+*(Add instructions on how to run the tools, including required arguments and input file formats.)*
+
+## Contributing
+
+This project follows the standard Chromium OS contribution process.