.. _remote-debugging:

Remote debugging attachment protocol
====================================

This protocol enables external tools to attach to a running CPython process and
execute Python code remotely.

Most platforms require elevated privileges to attach to another Python process.

Disabling remote debugging
--------------------------

To disable remote debugging support, use any of the following:

* Set the :envvar:`PYTHON_DISABLE_REMOTE_DEBUG` environment variable to ``1`` before
  starting the interpreter.
* Use the :option:`-X disable_remote_debug` command-line option.
* Compile Python with the :option:`--without-remote-debug` build flag.

.. _permission-requirements:

Permission requirements
=======================

Attaching to a running Python process for remote debugging requires elevated
privileges on most platforms. The specific requirements and troubleshooting
steps depend on your operating system:

.. rubric:: Linux

The tracer process must have the ``CAP_SYS_PTRACE`` capability or equivalent
privileges. You can only trace processes you own and can signal. Tracing may
fail if the process is already being traced, or if it is running with
set-user-ID or set-group-ID. Security modules like Yama may further restrict
tracing.

To temporarily relax ptrace restrictions (until reboot), run:

  ``echo 0 | sudo tee /proc/sys/kernel/yama/ptrace_scope``

.. note::

   Disabling ``ptrace_scope`` reduces system hardening and should only be done
   in trusted environments.

If running inside a container, use ``--cap-add=SYS_PTRACE`` or
``--privileged``, and run as root if needed.

Try re-running the command with elevated privileges:

  ``sudo -E !!``


.. rubric:: macOS

To attach to another process, you typically need to run your debugging tool
with elevated privileges. This can be done by using ``sudo`` or running as
root.

Even when attaching to processes you own, macOS may block debugging unless
the debugger is run with root privileges due to system security restrictions.


.. rubric:: Windows

To attach to another process, you usually need to run your debugging tool
with administrative privileges. Start the command prompt or terminal as
Administrator.

Some processes may still be inaccessible even with Administrator rights,
unless you have the ``SeDebugPrivilege`` privilege enabled.

To resolve file or folder access issues, adjust the security permissions:

  1. Right-click the file or folder and select **Properties**.
  2. Go to the **Security** tab to view users and groups with access.
  3. Click **Edit** to modify permissions.
  4. Select your user account.
  5. In **Permissions**, check **Read** or **Full control** as needed.
  6. Click **Apply**, then **OK** to confirm.


.. note::

   Ensure you've satisfied all :ref:`permission-requirements` before proceeding.

This section describes the low-level protocol that enables external tools to
inject and execute a Python script within a running CPython process.

This mechanism forms the basis of the :func:`sys.remote_exec` function, which
instructs a remote Python process to execute a ``.py`` file. However, this
section does not document the usage of that function. Instead, it provides a
detailed explanation of the underlying protocol, which takes as input the
``pid`` of a target Python process and the path to a Python source file to be
executed. This information supports independent reimplementation of the
protocol, regardless of programming language.

.. warning::

    The execution of the injected script depends on the interpreter reaching a
    safe evaluation point. As a result, execution may be delayed depending on
    the runtime state of the target process.

Once injected, the script is executed by the interpreter within the target
process the next time a safe evaluation point is reached. This approach enables
remote execution capabilities without modifying the behavior or structure of
the running Python application.

Subsequent sections provide a step-by-step description of the protocol,
including techniques for locating interpreter structures in memory, safely
accessing internal fields, and triggering code execution. Platform-specific
variations are noted where applicable, and example implementations are included
to clarify each operation.

Locating the PyRuntime structure
================================

CPython places the ``PyRuntime`` structure in a dedicated binary section to
help external tools find it at runtime. The name and format of this section
vary by platform. For example, ``.PyRuntime`` is used on ELF systems, and
``__DATA,__PyRuntime`` is used on macOS. Tools can find the offset of this
structure by examining the binary on disk.

The ``PyRuntime`` structure contains CPython’s global interpreter state and
provides access to other internal data, including the list of interpreters,
thread states, and debugger support fields.

To work with a remote Python process, a debugger must first find the memory
address of the ``PyRuntime`` structure in the target process. This address
can’t be hardcoded or calculated from a symbol name, because it depends on
where the operating system loaded the binary.

The method for finding ``PyRuntime`` depends on the platform, but the steps are
the same in general:

1. Find the base address where the Python binary or shared library was loaded
   in the target process.
2. Use the on-disk binary to locate the offset of the ``.PyRuntime`` section.
3. Add the section offset to the base address to compute the address in memory.

The sections below explain how to do this on each supported platform and
include example code.

.. rubric:: Linux (ELF)

To find the ``PyRuntime`` structure on Linux:

1. Read the process’s memory map (for example, ``/proc/<pid>/maps``) to find
   the address where the Python executable or ``libpython`` was loaded.
2. Parse the ELF section headers in the binary to get the offset of the
   ``.PyRuntime`` section.
3. Add that offset to the base address from step 1 to get the memory address of
   ``PyRuntime``.

The following is an example implementation::

    def find_py_runtime_linux(pid: int) -> int:
        # Step 1: Try to find the Python executable in memory
        binary_path, base_address = find_mapped_binary(
            pid, name_contains="python"
        )

        # Step 2: Fallback to shared library if executable is not found
        if binary_path is None:
            binary_path, base_address = find_mapped_binary(
                pid, name_contains="libpython"
            )

        # Step 3: Parse ELF headers to get .PyRuntime section offset
        section_offset = parse_elf_section_offset(
            binary_path, ".PyRuntime"
        )

        # Step 4: Compute PyRuntime address in memory
        return base_address + section_offset


On Linux systems, there are two main approaches to read memory from another
process. The first is through the ``/proc`` filesystem, specifically by reading from
``/proc/[pid]/mem`` which provides direct access to the process's memory. This
requires appropriate permissions - either being the same user as the target
process or having root access. The second approach is using the
``process_vm_readv()`` system call which provides a more efficient way to copy
memory between processes. While ptrace's ``PTRACE_PEEKTEXT`` operation can also be
used to read memory, it is significantly slower as it only reads one word at a
time and requires multiple context switches between the tracer and tracee
processes.

For parsing ELF sections, the process involves reading and interpreting the ELF
file format structures from the binary file on disk. The ELF header contains a
pointer to the section header table. Each section header contains metadata about
a section including its name (stored in a separate string table), offset, and
size. To find a specific section like .PyRuntime, you need to walk through these
headers and match the section name. The section header then provides the offset
where that section exists in the file, which can be used to calculate its
runtime address when the binary is loaded into memory.

You can read more about the ELF file format in the `ELF specification
<https://en.wikipedia.org/wiki/Executable_and_Linkable_Format>`_.


.. rubric:: macOS (Mach-O)

To find the ``PyRuntime`` structure on macOS:

1. Call ``task_for_pid()`` to get the ``mach_port_t`` task port for the target
   process. This handle is needed to read memory using APIs like
   ``mach_vm_read_overwrite`` and ``mach_vm_region``.
2. Scan the memory regions to find the one containing the Python executable or
   ``libpython``.
3. Load the binary file from disk and parse the Mach-O headers to find the
   section named ``PyRuntime`` in the ``__DATA`` segment.  On macOS, symbol
   names are automatically prefixed with an underscore, so the ``PyRuntime``
   symbol appears as ``_PyRuntime`` in the symbol table, but the section name
   is not affected.

The following is an example implementation::

    def find_py_runtime_macos(pid: int) -> int:
        # Step 1: Get access to the process's memory
        handle = get_memory_access_handle(pid)

        # Step 2: Try to find the Python executable in memory
        binary_path, base_address = find_mapped_binary(
            handle, name_contains="python"
        )

        # Step 3: Fallback to libpython if the executable is not found
        if binary_path is None:
            binary_path, base_address = find_mapped_binary(
                handle, name_contains="libpython"
            )

        # Step 4: Parse Mach-O headers to get __DATA,__PyRuntime section offset
        section_offset = parse_macho_section_offset(
            binary_path, "__DATA", "__PyRuntime"
        )

        # Step 5: Compute the PyRuntime address in memory
        return base_address + section_offset

On macOS, accessing another process's memory requires using Mach-O specific APIs
and file formats. The first step is obtaining a ``task_port`` handle via
``task_for_pid()``, which provides access to the target process's memory space.
This handle enables memory operations through APIs like
``mach_vm_read_overwrite()``.

The process memory can be examined using ``mach_vm_region()`` to scan through the
virtual memory space, while ``proc_regionfilename()`` helps identify which binary
files are loaded at each memory region. When the Python binary or library is
found, its Mach-O headers need to be parsed to locate the ``PyRuntime`` structure.

The Mach-O format organizes code and data into segments and sections. The
``PyRuntime`` structure lives in a section named ``__PyRuntime`` within the
``__DATA`` segment. The actual runtime address calculation involves finding the
``__TEXT`` segment which serves as the binary's base address, then locating the
``__DATA`` segment containing our target section. The final address is computed by
combining the base address with the appropriate section offsets from the Mach-O
headers.

Note that accessing another process's memory on macOS typically requires
elevated privileges - either root access or special security entitlements
granted to the debugging process.


.. rubric:: Windows (PE)

To find the ``PyRuntime`` structure on Windows:

1. Use the ToolHelp API to enumerate all modules loaded in the target process.
   This is done using functions such as `CreateToolhelp32Snapshot
   <https://learn.microsoft.com/en-us/windows/win32/api/tlhelp32/nf-tlhelp32-createtoolhelp32snapshot>`_,
   `Module32First
   <https://learn.microsoft.com/en-us/windows/win32/api/tlhelp32/nf-tlhelp32-module32first>`_,
   and `Module32Next
   <https://learn.microsoft.com/en-us/windows/win32/api/tlhelp32/nf-tlhelp32-module32next>`_.
2. Identify the module corresponding to :file:`python.exe` or
   :file:`python{XY}.dll`, where ``X`` and ``Y`` are the major and minor
   version numbers of the Python version, and record its base address.
3. Locate the ``PyRuntim`` section. Due to the PE format's 8-character limit
   on section names (defined as ``IMAGE_SIZEOF_SHORT_NAME``), the original
   name ``PyRuntime`` is truncated. This section contains the ``PyRuntime``
   structure.
4. Retrieve the section’s relative virtual address (RVA) and add it to the base
   address of the module.

The following is an example implementation::

    def find_py_runtime_windows(pid: int) -> int:
        # Step 1: Try to find the Python executable in memory
        binary_path, base_address = find_loaded_module(
            pid, name_contains="python"
        )

        # Step 2: Fallback to shared pythonXY.dll if the executable is not
        # found
        if binary_path is None:
            binary_path, base_address = find_loaded_module(
                pid, name_contains="python3"
            )

        # Step 3: Parse PE section headers to get the RVA of the PyRuntime
        # section. The section name appears as "PyRuntim" due to the
        # 8-character limit defined by the PE format (IMAGE_SIZEOF_SHORT_NAME).
        section_rva = parse_pe_section_offset(binary_path, "PyRuntim")

        # Step 4: Compute PyRuntime address in memory
        return base_address + section_rva


On Windows, accessing another process's memory requires using the Windows API
functions like ``CreateToolhelp32Snapshot()`` and ``Module32First()/Module32Next()``
to enumerate loaded modules. The ``OpenProcess()`` function provides a handle to
access the target process's memory space, enabling memory operations through
``ReadProcessMemory()``.

The process memory can be examined by enumerating loaded modules to find the
Python binary or DLL. When found, its PE headers need to be parsed to locate the
``PyRuntime`` structure.

The PE format organizes code and data into sections. The ``PyRuntime`` structure
lives in a section named "PyRuntim" (truncated from "PyRuntime" due to PE's
8-character name limit). The actual runtime address calculation involves finding
the module's base address from the module entry, then locating our target
section in the PE headers. The final address is computed by combining the base
address with the section's virtual address from the PE section headers.

Note that accessing another process's memory on Windows typically requires
appropriate privileges - either administrative access or the ``SeDebugPrivilege``
privilege granted to the debugging process.


Reading _Py_DebugOffsets
========================

Once the address of the ``PyRuntime`` structure has been determined, the next
step is to read the ``_Py_DebugOffsets`` structure located at the beginning of
the ``PyRuntime`` block.

This structure provides version-specific field offsets that are needed to
safely read interpreter and thread state memory. These offsets vary between
CPython versions and must be checked before use to ensure they are compatible.

To read and check the debug offsets, follow these steps:

1. Read memory from the target process starting at the ``PyRuntime`` address,
   covering the same number of bytes as the ``_Py_DebugOffsets`` structure.
   This structure is located at the very start of the ``PyRuntime`` memory
   block. Its layout is defined in CPython’s internal headers and stays the
   same within a given minor version, but may change in major versions.

2. Check that the structure contains valid data:

   - The ``cookie`` field must match the expected debug marker.
   - The ``version`` field must match the version of the Python interpreter
     used by the debugger.
   - If either the debugger or the target process is using a pre-release
     version (for example, an alpha, beta, or release candidate), the versions
     must match exactly.
   - The ``free_threaded`` field must have the same value in both the debugger
     and the target process.

3. If the structure is valid, the offsets it contains can be used to locate
   fields in memory. If any check fails, the debugger should stop the operation
   to avoid reading memory in the wrong format.

The following is an example implementation that reads and checks
``_Py_DebugOffsets``::

    def read_debug_offsets(pid: int, py_runtime_addr: int) -> DebugOffsets:
        # Step 1: Read memory from the target process at the PyRuntime address
        data = read_process_memory(
            pid, address=py_runtime_addr, size=DEBUG_OFFSETS_SIZE
        )

        # Step 2: Deserialize the raw bytes into a _Py_DebugOffsets structure
        debug_offsets = parse_debug_offsets(data)

        # Step 3: Validate the contents of the structure
        if debug_offsets.cookie != EXPECTED_COOKIE:
            raise RuntimeError("Invalid or missing debug cookie")
        if debug_offsets.version != LOCAL_PYTHON_VERSION:
            raise RuntimeError(
                "Mismatch between caller and target Python versions"
            )
        if debug_offsets.free_threaded != LOCAL_FREE_THREADED:
            raise RuntimeError("Mismatch in free-threaded configuration")

        return debug_offsets


.. warning::

   **Process suspension recommended**

   To avoid race conditions and ensure memory consistency, it is strongly
   recommended that the target process be suspended before performing any
   operations that read or write internal interpreter state. The Python runtime
   may concurrently mutate interpreter data structures—such as creating or
   destroying threads—during normal execution. This can result in invalid
   memory reads or writes.

   A debugger may suspend execution by attaching to the process with ``ptrace``
   or by sending a ``SIGSTOP`` signal. Execution should only be resumed after
   debugger-side memory operations are complete.

   .. note::

      Some tools, such as profilers or sampling-based debuggers, may operate on
      a running process without suspension. In such cases, tools must be
      explicitly designed to handle partially updated or inconsistent memory.
      For most debugger implementations, suspending the process remains the
      safest and most robust approach.


Locating the interpreter and thread state
=========================================

Before code can be injected and executed in a remote Python process, the
debugger must choose a thread in which to schedule execution. This is necessary
because the control fields used to perform remote code injection are located in
the ``_PyRemoteDebuggerSupport`` structure, which is embedded in a
``PyThreadState`` object. These fields are modified by the debugger to request
execution of injected scripts.

The ``PyThreadState`` structure represents a thread running inside a Python
interpreter.  It maintains the thread’s evaluation context and contains the
fields required for debugger coordination.  Locating a valid ``PyThreadState``
is therefore a key prerequisite for triggering execution remotely.

A thread is typically selected based on its role or ID. In most cases, the main
thread is used, but some tools may target a specific thread by its native
thread ID. Once the target thread is chosen, the debugger must locate both the
interpreter and the associated thread state structures in memory.

The relevant internal structures are defined as follows:

- ``PyInterpreterState`` represents an isolated Python interpreter instance.
  Each interpreter maintains its own set of imported modules, built-in state,
  and thread state list. Although most Python applications use a single
  interpreter, CPython supports multiple interpreters in the same process.

- ``PyThreadState`` represents a thread running within an interpreter. It
  contains execution state and the control fields used by the debugger.

To locate a thread:

1. Use the offset ``runtime_state.interpreters_head`` to obtain the address of
   the first interpreter in the ``PyRuntime`` structure. This is the entry point
   to the linked list of active interpreters.

2. Use the offset ``interpreter_state.threads_main`` to access the main thread
   state associated with the selected interpreter. This is typically the most
   reliable thread to target.

3. Optionally, use the offset ``interpreter_state.threads_head`` to iterate
   through the linked list of all thread states. Each ``PyThreadState``
   structure contains a ``native_thread_id`` field, which may be compared to
   a target thread ID to find a specific thread.

4. Once a valid ``PyThreadState`` has been found, its address can be used in
   later steps of the protocol, such as writing debugger control fields and
   scheduling execution.

The following is an example implementation that locates the main thread state::

    def find_main_thread_state(
        pid: int, py_runtime_addr: int, debug_offsets: DebugOffsets,
    ) -> int:
        # Step 1: Read interpreters_head from PyRuntime
        interp_head_ptr = (
            py_runtime_addr + debug_offsets.runtime_state.interpreters_head
        )
        interp_addr = read_pointer(pid, interp_head_ptr)
        if interp_addr == 0:
            raise RuntimeError("No interpreter found in the target process")

        # Step 2: Read the threads_main pointer from the interpreter
        threads_main_ptr = (
            interp_addr + debug_offsets.interpreter_state.threads_main
        )
        thread_state_addr = read_pointer(pid, threads_main_ptr)
        if thread_state_addr == 0:
            raise RuntimeError("Main thread state is not available")

        return thread_state_addr

The following example demonstrates how to locate a thread by its native thread
ID::

    def find_thread_by_id(
        pid: int,
        interp_addr: int,
        debug_offsets: DebugOffsets,
        target_tid: int,
    ) -> int:
        # Start at threads_head and walk the linked list
        thread_ptr = read_pointer(
            pid,
            interp_addr + debug_offsets.interpreter_state.threads_head
        )

        while thread_ptr:
            native_tid_ptr = (
                thread_ptr + debug_offsets.thread_state.native_thread_id
            )
            native_tid = read_int(pid, native_tid_ptr)
            if native_tid == target_tid:
                return thread_ptr
            thread_ptr = read_pointer(
                pid,
                thread_ptr + debug_offsets.thread_state.next
            )

        raise RuntimeError("Thread with the given ID was not found")


Once a valid thread state has been located, the debugger can proceed with
modifying its control fields and scheduling execution, as described in the next
section.

Writing control information
===========================

Once a valid ``PyThreadState`` structure has been identified, the debugger may
modify control fields within it to schedule the execution of a specified Python
script. These control fields are checked periodically by the interpreter, and
when set correctly, they trigger the execution of remote code at a safe point
in the evaluation loop.

Each ``PyThreadState`` contains a ``_PyRemoteDebuggerSupport`` structure used
for communication between the debugger and the interpreter. The locations of
its fields are defined by the ``_Py_DebugOffsets`` structure and include the
following:

- ``debugger_script_path``: A fixed-size buffer that holds the full path to a
  Python source file (``.py``).  This file must be accessible and readable by
  the target process when execution is triggered.

- ``debugger_pending_call``: An integer flag. Setting this to ``1`` tells the
  interpreter that a script is ready to be executed.

- ``eval_breaker``: A field checked by the interpreter during execution.
  Setting bit 5 (``_PY_EVAL_PLEASE_STOP_BIT``, value ``1U << 5``) in this
  field causes the interpreter to pause and check for debugger activity.

To complete the injection, the debugger must perform the following steps:

1. Write the full script path into the ``debugger_script_path`` buffer.
2. Set ``debugger_pending_call`` to ``1``.
3. Read the current value of ``eval_breaker``, set bit 5
   (``_PY_EVAL_PLEASE_STOP_BIT``), and write the updated value back. This
   signals the interpreter to check for debugger activity.

The following is an example implementation::

    def inject_script(
        pid: int,
        thread_state_addr: int,
        debug_offsets: DebugOffsets,
        script_path: str
    ) -> None:
        # Compute the base offset of _PyRemoteDebuggerSupport
        support_base = (
            thread_state_addr +
            debug_offsets.debugger_support.remote_debugger_support
        )

        # Step 1: Write the script path into debugger_script_path
        script_path_ptr = (
            support_base +
            debug_offsets.debugger_support.debugger_script_path
        )
        write_string(pid, script_path_ptr, script_path)

        # Step 2: Set debugger_pending_call to 1
        pending_ptr = (
            support_base +
            debug_offsets.debugger_support.debugger_pending_call
        )
        write_int(pid, pending_ptr, 1)

        # Step 3: Set _PY_EVAL_PLEASE_STOP_BIT (bit 5, value 1 << 5) in
        # eval_breaker
        eval_breaker_ptr = (
            thread_state_addr +
            debug_offsets.debugger_support.eval_breaker
        )
        breaker = read_int(pid, eval_breaker_ptr)
        breaker |= (1 << 5)
        write_int(pid, eval_breaker_ptr, breaker)


Once these fields are set, the debugger may resume the process (if it was
suspended).  The interpreter will process the request at the next safe
evaluation point, load the script from disk, and execute it.

It is the responsibility of the debugger to ensure that the script file remains
present and accessible to the target process during execution.

.. note::

   Script execution is asynchronous. The script file cannot be deleted
   immediately after injection. The debugger should wait until the injected
   script has produced an observable effect before removing the file.
   This effect depends on what the script is designed to do. For example,
   a debugger might wait until the remote process connects back to a socket
   before removing the script. Once such an effect is observed, it is safe to
   assume the file is no longer needed.

Summary
=======

To inject and execute a Python script in a remote process:

1. Locate the ``PyRuntime`` structure in the target process’s memory.
2. Read and validate the ``_Py_DebugOffsets`` structure at the beginning of
   ``PyRuntime``.
3. Use the offsets to locate a valid ``PyThreadState``.
4. Write the path to a Python script into ``debugger_script_path``.
5. Set the ``debugger_pending_call`` flag to ``1``.
6. Set ``_PY_EVAL_PLEASE_STOP_BIT`` in the ``eval_breaker`` field.
7. Resume the process (if suspended). The script will execute at the next safe
   evaluation point.