/**
 * @license
 * Copyright 2010 The Emscripten Authors
 * SPDX-License-Identifier: MIT
 */

// === Auto-generated postamble setup entry stuff ===

{{{ exportRuntime() }}}

var calledRun;

#if STANDALONE_WASM && MAIN_READS_PARAMS
var mainArgs = undefined;
#endif

dependenciesFulfilled = function runCaller() {
  // If run has never been called, and we should call run (INVOKE_RUN is true, and Module.noInitialRun is not false)
  if (!calledRun) run();
  if (!calledRun) dependenciesFulfilled = runCaller; // try this again later, after new deps are fulfilled
};

#if HAS_MAIN
#if MAIN_READS_PARAMS
function callMain(args = []) {
#else
function callMain() {
#endif
#if ASSERTIONS
  assert(runDependencies == 0, 'cannot call main when async dependencies remain! (listen on Module["onRuntimeInitialized"])');
  assert(__ATPRERUN__.length == 0, 'cannot call main when preRun functions remain to be called');
#endif

  var entryFunction = {{{ getEntryFunction() }}};

#if PROXY_TO_PTHREAD
  // With PROXY_TO_PTHREAD make sure we keep the runtime alive until the
  // proxied main calls exit (see exitOnMainThread() for where Pop is called).
  {{{ runtimeKeepalivePush() }}}
#endif

#if MAIN_MODULE
  // Main modules can't tell if they have main() at compile time, since it may
  // arrive from a dynamic library.
  if (!entryFunction) return;
#endif

#if MAIN_READS_PARAMS && STANDALONE_WASM
  mainArgs = [thisProgram].concat(args)
#elif MAIN_READS_PARAMS
  args.unshift(thisProgram);

  var argc = args.length;
  var argv = stackAlloc((argc + 1) * {{{ POINTER_SIZE }}});
  var argv_ptr = argv >> {{{ POINTER_SHIFT }}};
  args.forEach((arg) => {
    {{{ POINTER_HEAP }}}[argv_ptr++] = {{{ to64('allocateUTF8OnStack(arg)') }}};
  });
  {{{ POINTER_HEAP }}}[argv_ptr] = {{{ to64('0') }}};
#else
  var argc = 0;
  var argv = 0;
#endif // MAIN_READS_PARAMS

  try {
#if BENCHMARK
    var start = Date.now();
#endif

#if ABORT_ON_WASM_EXCEPTIONS
    // See abortWrapperDepth in preamble.js!
    abortWrapperDepth += 1;
#endif

#if STANDALONE_WASM
    entryFunction();
    // _start (in crt1.c) will call exit() if main return non-zero.  So we know
    // that if we get here main returned zero.
    var ret = 0;
#else
    var ret = entryFunction(argc, {{{ to64('argv') }}});
#endif // STANDALONE_WASM

#if BENCHMARK
    Module.realPrint('main() took ' + (Date.now() - start) + ' milliseconds');
#endif

#if ASYNCIFY == 2
    // The current spec of JSPI returns a promise only if the function suspends
    // and a plain value otherwise. This will likely change:
    // https://github.com/WebAssembly/js-promise-integration/issues/11
    Promise.resolve(ret).then((result) => {
      exitJS(result, /* implicit = */ true);
    }).catch((e) => {
      handleException(e);
    });
#else
    // if we're not running an evented main loop, it's time to exit
    exitJS(ret, /* implicit = */ true);
#endif // ASYNCIFY == 2
    return ret;
  }
  catch (e) {
    return handleException(e);
  }
#if ABORT_ON_WASM_EXCEPTIONS
  finally {
    // See abortWrapperDepth in preamble.js!
    abortWrapperDepth -= 1;
  }
#endif
}
#endif // HAS_MAIN

#if STACK_OVERFLOW_CHECK
function stackCheckInit() {
  // This is normally called automatically during __wasm_call_ctors but need to
  // get these values before even running any of the ctors so we call it redundantly
  // here.
#if ASSERTIONS && USE_PTHREADS
  // See $establishStackSpace for the equivelent code that runs on a thread
  assert(!ENVIRONMENT_IS_PTHREAD);
#endif
#if RELOCATABLE
  _emscripten_stack_set_limits({{{ STACK_HIGH }}} , {{{ STACK_LOW }}});
#else
  _emscripten_stack_init();
#endif
  // TODO(sbc): Move writeStackCookie to native to to avoid this.
  writeStackCookie();
}
#endif

#if RELOCATABLE
var dylibsLoaded = false;
#if '$LDSO' in addedLibraryItems
LDSO.init();
#endif
#endif

#if MAIN_READS_PARAMS
function run(args = arguments_) {
#else
function run() {
#endif

  if (runDependencies > 0) {
#if RUNTIME_LOGGING
    err('run() called, but dependencies remain, so not running');
#endif
    return;
  }

#if STACK_OVERFLOW_CHECK
#if USE_PTHREADS
  if (!ENVIRONMENT_IS_PTHREAD)
#endif
    stackCheckInit();
#endif

#if RELOCATABLE
  if (!dylibsLoaded) {
  // Loading of dynamic libraries needs to happen on each thread, so we can't
  // use the normal __ATPRERUN__ mechanism.
#if MAIN_MODULE
    preloadDylibs();
#else
    reportUndefinedSymbols();
#endif
    dylibsLoaded = true;

    // Loading dylibs can add run dependencies.
    if (runDependencies > 0) {
#if RUNTIME_LOGGING
      err('preloadDylibs added run() dependencies, not running yet');
#endif
      return;
    }
  }
#endif

#if WASM_WORKERS
  if (ENVIRONMENT_IS_WASM_WORKER) {
#if MODULARIZE
    readyPromiseResolve(Module);
#endif // MODULARIZE
    return initRuntime();
  }
#endif

#if USE_PTHREADS
  if (ENVIRONMENT_IS_PTHREAD) {
#if MODULARIZE
    // The promise resolve function typically gets called as part of the execution
    // of `doRun` below. The workers/pthreads don't execute `doRun` so the
    // creation promise can be resolved, marking the pthread-Module as initialized.
    readyPromiseResolve(Module);
#endif // MODULARIZE
    initRuntime();
    startWorker(Module);
    return;
  }
#endif

  preRun();

  // a preRun added a dependency, run will be called later
  if (runDependencies > 0) {
#if RUNTIME_LOGGING
    err('run() called, but dependencies remain, so not running');
#endif
    return;
  }

  function doRun() {
    // run may have just been called through dependencies being fulfilled just in this very frame,
    // or while the async setStatus time below was happening
    if (calledRun) return;
    calledRun = true;
    Module['calledRun'] = true;

    if (ABORT) return;

    initRuntime();

#if HAS_MAIN
    preMain();
#endif

#if MODULARIZE
    readyPromiseResolve(Module);
#endif
#if expectToReceiveOnModule('onRuntimeInitialized')
    if (Module['onRuntimeInitialized']) Module['onRuntimeInitialized']();
#endif

#if HAS_MAIN
#if MAIN_READS_PARAMS
    if (shouldRunNow) callMain(args);
#else
    if (shouldRunNow) callMain();
#endif
#else
#if ASSERTIONS
    assert(!Module['_main'], 'compiled without a main, but one is present. if you added it from JS, use Module["onRuntimeInitialized"]');
#endif // ASSERTIONS
#endif // HAS_MAIN

    postRun();
  }

#if expectToReceiveOnModule('setStatus')
  if (Module['setStatus']) {
    Module['setStatus']('Running...');
    setTimeout(function() {
      setTimeout(function() {
        Module['setStatus']('');
      }, 1);
      doRun();
    }, 1);
  } else
#endif
  {
    doRun();
  }
#if STACK_OVERFLOW_CHECK
  checkStackCookie();
#endif
}

#if ASSERTIONS
#if EXIT_RUNTIME == 0
function checkUnflushedContent() {
  // Compiler settings do not allow exiting the runtime, so flushing
  // the streams is not possible. but in ASSERTIONS mode we check
  // if there was something to flush, and if so tell the user they
  // should request that the runtime be exitable.
  // Normally we would not even include flush() at all, but in ASSERTIONS
  // builds we do so just for this check, and here we see if there is any
  // content to flush, that is, we check if there would have been
  // something a non-ASSERTIONS build would have not seen.
  // How we flush the streams depends on whether we are in SYSCALLS_REQUIRE_FILESYSTEM=0
  // mode (which has its own special function for this; otherwise, all
  // the code is inside libc)
  var oldOut = out;
  var oldErr = err;
  var has = false;
  out = err = (x) => {
    has = true;
  }
  try { // it doesn't matter if it fails
#if SYSCALLS_REQUIRE_FILESYSTEM == 0 && '$flush_NO_FILESYSTEM' in addedLibraryItems
    flush_NO_FILESYSTEM();
#elif hasExportedSymbol('fflush')
    _fflush(0);
#endif
#if '$FS' in addedLibraryItems && '$TTY' in addedLibraryItems
    // also flush in the JS FS layer
    ['stdout', 'stderr'].forEach(function(name) {
      var info = FS.analyzePath('/dev/' + name);
      if (!info) return;
      var stream = info.object;
      var rdev = stream.rdev;
      var tty = TTY.ttys[rdev];
      if (tty && tty.output && tty.output.length) {
        has = true;
      }
    });
#endif
  } catch(e) {}
  out = oldOut;
  err = oldErr;
  if (has) {
    warnOnce('stdio streams had content in them that was not flushed. you should set EXIT_RUNTIME to 1 (see the FAQ), or make sure to emit a newline when you printf etc.');
#if FILESYSTEM == 0 || SYSCALLS_REQUIRE_FILESYSTEM == 0
    warnOnce('(this may also be due to not including full filesystem support - try building with -sFORCE_FILESYSTEM)');
#endif
  }
}
#endif // EXIT_RUNTIME
#endif // ASSERTIONS

#if expectToReceiveOnModule('preInit')
if (Module['preInit']) {
  if (typeof Module['preInit'] == 'function') Module['preInit'] = [Module['preInit']];
  while (Module['preInit'].length > 0) {
    Module['preInit'].pop()();
  }
}
#endif

#if HAS_MAIN
// shouldRunNow refers to calling main(), not run().
#if INVOKE_RUN
var shouldRunNow = true;
#else
var shouldRunNow = false;
#endif

#if expectToReceiveOnModule('noInitialRun')
if (Module['noInitialRun']) shouldRunNow = false;
#endif

#endif // HAS_MAIN

run();

#if BUILD_AS_WORKER

var workerResponded = false, workerCallbackId = -1;

(function() {
  var messageBuffer = null, buffer = 0, bufferSize = 0;

  function flushMessages() {
    if (!messageBuffer) return;
    if (runtimeInitialized) {
      var temp = messageBuffer;
      messageBuffer = null;
      temp.forEach(function(message) {
        onmessage(message);
      });
    }
  }

  function messageResender() {
    flushMessages();
    if (messageBuffer) {
      setTimeout(messageResender, 100); // still more to do
    }
  }

  onmessage = (msg) => {
    // if main has not yet been called (mem init file, other async things), buffer messages
    if (!runtimeInitialized) {
      if (!messageBuffer) {
        messageBuffer = [];
        setTimeout(messageResender, 100);
      }
      messageBuffer.push(msg);
      return;
    }
    flushMessages();

    var func = Module['_' + msg.data['funcName']];
    if (!func) throw 'invalid worker function to call: ' + msg.data['funcName'];
    var data = msg.data['data'];
    if (data) {
      if (!data.byteLength) data = new Uint8Array(data);
      if (!buffer || bufferSize < data.length) {
        if (buffer) _free(buffer);
        bufferSize = data.length;
        buffer = _malloc(data.length);
      }
      HEAPU8.set(data, buffer);
    }

    workerResponded = false;
    workerCallbackId = msg.data['callbackId'];
    if (data) {
      func(buffer, data.length);
    } else {
      func(0, 0);
    }
  }
})();

#endif

#if STANDALONE_WASM && ASSERTIONS && !WASM_BIGINT
err('warning: running JS from STANDALONE_WASM without WASM_BIGINT will fail if a syscall with i64 is used (in standalone mode we cannot legalize syscalls)');
#endif